Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 85. doi:10.18429/JACoW-MEDSI2020-MOPC14
[n] G. Velev et al., “Fermilab Superconducting Nb?Sn High Field Magnet R&D Program”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4338-4341. doi:10.18429/JACoW-IPAC2019-THPTS099
[n] R. Briggs, “Dan Birx Memorial Session”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper WE100, pp. 657-657.
[n] S. Falabella, S. Sampayan, T. Houck, J. Weir, and J. McCarrick, “Effect of Backscattered Electrons on Electron Beam Focus”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB11, pp. 458-460.
[n] J. O'Hara et al., “Intense Proton Core and Halo Beam Profile Measurement: Beam Line Component Mechanical Design”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC14, pp. 181-183.
[n] H. Soltner, U. Bechstedt, J. G. De Villiers, and R. T?Âlle, “Magnetic-Field Calculations for the Magnets of the High-Energy Storage Ring (HESR) at FAIR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP016, pp. 166-168.
[n] G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
[n] R. Keller, R. Thomae, and J. Reijonen, “Evolution of the LEBT Layout for SNS”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD19, pp. 253-255.
[n] A. C. Paul, G. A. Westenskow, L. R. Bertolini, and P. T. Duffy, “The Mechanical Design for the DARHT-II Downstream Beam Transport Line”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB16, pp. 473-478.
[n] D. J. Clark, “Recent Progress in Ion Sources and Pre-Accelerators”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-1, pp. 409-419.
[n] K. L. Erdman et al., “Initial Operation of the Sherbrooke EBCO 19 MeV Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper C-05, pp. 327-330.
[n] R. Bartolini et al., “Optimisation of a Single-Pass Superconducting Linac as a FEL Driver for the NLS Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEOB02, pp. 480-487.
[n] H. M. Milcent and F. B. Bernard, “LHC Powering Circuit Overview: A Mixed Industrial and Classic Accelerator Control Application”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB23, pp. 211-213.
[n] O. R. Sander, D. D. Chamberlin, R. A. Jameson, and G. N. Minerbo, “Beam Tomography in Two and Four Dimensions”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S5-10, pp. 314-318.
[n] M. J. Lamm et al., “4-Coil Superconducting Helical Solenoid Model for MANX”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP059, pp. 265-267.
[n] Q. Z. Xing et al., “Present Status of the High Current Proton Linac at Tsinghua University and Its Beam Measurements and Applications”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3AB01, pp. 208-210.
[n] P. Lucas, K. Cahill, R. Peters, and J. Smedinghoff, “Modern Operators' COnsoles for Accelerator Control at Fermilab”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2523-2526.
[n] B. Qin et al., “Main Magnet and Central Region Design for a 10 MeV PET Cyclotron CYCHU-10”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP022, pp. 184-186.
[n] D. J. Clark, “Survey of External Injection Systems for Cyclotrons”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G01, pp. XX-XX.
[n] A. O. Sidorin et al., “Possibilities for Experiments with Rare Radioactive Ions in a Storage Ring Using Individual Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT103, pp. 1393-1395.
[n] H. Witte et al., “Overview of the Magnets Required for the Interaction Region of the Electron-Ion Collider (EIC)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2578-2581. doi:10.18429/JACoW-IPAC2021-WEPAB003
[n] D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1563-1566.
[n] T. M. Putnam, H. S. Butler, and J. J. Smith, “Computer Control of the LAMPF Accelerator”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IX-05, pp. 471-478.
[n] A. Sy et al., “Degrader beamline design at the CEBAF injector for machine acceptance studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1162-1165. doi:10.18429/JACoW-IPAC2023-MOPM081
[n] W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
[n] J. Sheehan and R. Witkover, “The RF System for the AGS 200-MeV Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IX-02, pp. 457-459.
[n] M. Othman, M. Boyle, C. Peqeuno, A. Sy, H. Schult, and B. Weatherford, “Design and test plans for a 1.3-GHz, 100-kW high-efficiency IOT amplifier”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR36, unpublished.
[n] C. S. Narug, J. Bernardini, M. Parise, and D. Passarelli, “Design of Production PIP-II SSR1 Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 822-824. doi:10.18429/JACoW-LINAC2022-THPOGE13
[n] N. Ayala, A. Ferrero Colomo, and T. Kramer, “Design, Construction and Testing of a Magnetic Probe for Fast Kicker Magnets”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3510-3513. doi:10.18429/JACoW-IPAC2021-WEPAB347
[n] M. Stephan, U. Hacker, K. Henn, A. Richert, K. Sobotta, and A. Weinert, “The COSY Control System, a Distributed Realtime Operating System: First Practical Experience at the COSY-Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1362-1365.
For LaTeX
Use Complete Form
For BibTeX
References
- A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 85.
- G. Velev et al., “Fermilab Superconducting Nb?Sn High Field Magnet R&D Program”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4338-4341.
- R. Briggs, “Dan Birx Memorial Session”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper WE100, pp. 657-657.
- S. Falabella, S. Sampayan, T. Houck, J. Weir, and J. McCarrick, “Effect of Backscattered Electrons on Electron Beam Focus”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB11, pp. 458-460.
- J. O'Hara et al., “Intense Proton Core and Halo Beam Profile Measurement: Beam Line Component Mechanical Design”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC14, pp. 181-183.
- H. Soltner, U. Bechstedt, J. G. De Villiers, and R. T?Âlle, “Magnetic-Field Calculations for the Magnets of the High-Energy Storage Ring (HESR) at FAIR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP016, pp. 166-168.
- G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
- R. Keller, R. Thomae, and J. Reijonen, “Evolution of the LEBT Layout for SNS”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD19, pp. 253-255.
- A. C. Paul, G. A. Westenskow, L. R. Bertolini, and P. T. Duffy, “The Mechanical Design for the DARHT-II Downstream Beam Transport Line”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB16, pp. 473-478.
- D. J. Clark, “Recent Progress in Ion Sources and Pre-Accelerators”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-1, pp. 409-419.
- K. L. Erdman et al., “Initial Operation of the Sherbrooke EBCO 19 MeV Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper C-05, pp. 327-330.
- R. Bartolini et al., “Optimisation of a Single-Pass Superconducting Linac as a FEL Driver for the NLS Project”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEOB02, pp. 480-487.
- H. M. Milcent and F. B. Bernard, “LHC Powering Circuit Overview: A Mixed Industrial and Classic Accelerator Control Application”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB23, pp. 211-213.
- O. R. Sander, D. D. Chamberlin, R. A. Jameson, and G. N. Minerbo, “Beam Tomography in Two and Four Dimensions”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S5-10, pp. 314-318.
- M. J. Lamm et al., “4-Coil Superconducting Helical Solenoid Model for MANX”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP059, pp. 265-267.
- Q. Z. Xing et al., “Present Status of the High Current Proton Linac at Tsinghua University and Its Beam Measurements and Applications”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO3AB01, pp. 208-210.
- P. Lucas, K. Cahill, R. Peters, and J. Smedinghoff, “Modern Operators' COnsoles for Accelerator Control at Fermilab”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2523-2526.
- B. Qin et al., “Main Magnet and Central Region Design for a 10 MeV PET Cyclotron CYCHU-10”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP022, pp. 184-186.
- D. J. Clark, “Survey of External Injection Systems for Cyclotrons”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G01, pp. XX-XX.
- A. O. Sidorin et al., “Possibilities for Experiments with Rare Radioactive Ions in a Storage Ring Using Individual Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT103, pp. 1393-1395.
- H. Witte et al., “Overview of the Magnets Required for the Interaction Region of the Electron-Ion Collider (EIC)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2578-2581.
- D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1563-1566.
- T. M. Putnam, H. S. Butler, and J. J. Smith, “Computer Control of the LAMPF Accelerator”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IX-05, pp. 471-478.
- A. Sy et al., “Degrader beamline design at the CEBAF injector for machine acceptance studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM081, pp. 1162-1165.
- W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
- J. Sheehan and R. Witkover, “The RF System for the AGS 200-MeV Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IX-02, pp. 457-459.
- M. Othman, M. Boyle, C. Peqeuno, A. Sy, H. Schult, and B. Weatherford, “Design and test plans for a 1.3-GHz, 100-kW high-efficiency IOT amplifier”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR36, unpublished.
- C. S. Narug, J. Bernardini, M. Parise, and D. Passarelli, “Design of Production PIP-II SSR1 Cavities”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 822-824.
- N. Ayala, A. Ferrero Colomo, and T. Kramer, “Design, Construction and Testing of a Magnetic Probe for Fast Kicker Magnets”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3510-3513.
- M. Stephan, U. Hacker, K. Henn, A. Richert, K. Sobotta, and A. Weinert, “The COSY Control System, a Distributed Realtime Operating System: First Practical Experience at the COSY-Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1362-1365.
Back to search