JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. Stadlbauer, A. Chmielinska, L. Ducimeti?¿re, D. Kontelis, T. Kramer, and V. Senaj, “DC Testing and Phase Resolved Partial Discharge Measurements of the New Trigger Transformers for the LHC Beam Dump Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3998-4000. doi:10.18429/JACoW-IPAC2019-THPRB079
[n]	D. Capatina, “Photon Beam Applied as Heat Flux on Irregular Surfaces in FEA”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 214-216. doi:10.18429/JACoW-MEDSI2018-WEPH07
[n]	M. F. Vorogushin, V. Glukhikh, B. Tronov, Yu. P. Vakhrushin and D. V. Efremov, “Status of Cyclotron Design in the Efremov Institute”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper C-08, pp. 132-135. 
[n]	W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and G. M. Wang, “NSLS2 Fill Pattern Monitor and Control”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 246-250. doi:10.18429/JACoW-IBIC2015-MOPB082
[n]	A. Basu, S. K. Gupta, S. B. V. Nagraju, P. Singh, and S. Singh, “Qt Based Control System Software for Low Energy Accelerator Facility”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD33, pp. 206-207. 
[n]	J. D. Hepburn, J. D. Walsh, and E. H. Williams, “Beam Probes for the Chalk River Superconducting Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1880-1883. 
[n]	W. Schappert, “Resonance Control for Future Linear Accelerators”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 363-367. doi:10.18429/JACoW-LINAC2016-TU2A03
[n]	M. H. Nasr and S. G. Tantawi, “The Design and Construction of a Novel Dual-Mode Dual-Frequency Linac Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4391-4394. doi:10.18429/JACoW-IPAC2018-THPMK048
[n]	I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322. 
[n]	F. B. Lockwood Estrin, J. W. Bradley, R. Valizadeh, A. N. Hannah, G. B. G. Stenning, and E. Seiler, “Using HiPIMS to Deposit V3Si Superconducting Thin Films”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPFDV009, pp.. 
[n]	B. Carlsten, E. Simakov, M. Gulley, N. A. Moody, and S. Russell, “Future Los Alamos Neutron Science Center (LANSCE) Directions and Enabling R&D Studies”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM014, unpublished. 
[n]	G. Ferioli, L. Jensen, and G. Vismara, “Protection and Diagnostic Systems for High Intensity Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358-360. 
[n]	V. Pavlenko, E. Montgomery, and H. Bhandari, “Technology transfer case study: Industrialized manufacturing of high quality photocathode thin films.”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUUD3, unpublished. 
[n]	D. J. Clark, “Recent Progress in Ion Sources and Pre-Accelerators”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-1, pp. 409-419. 
[n]	A. V. Feschenko, A. A. Men, and P. N. Ostroumov, “A Detector to Measure Longitudinal and Transverse Distributions of a Two Component Ion Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1073-1076. 
[n]	F. G. Resmini and D. J. Clark, “Beam Optics and Space Charge Effects in the Axial Injection Line for the 88 - Inch Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 465-471. 
[n]	D. Barlow et al., “Magnetic Design and Measurement of Nonlinear Multipole Magnets for the APT Beam Expander System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P036, pp. 3309-3311. 
[n]	Y. G. Kang, “Design and Development of Bipolar Power Supply for APS Storage Ring Correctors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1268-1271. 
[n]	D. J. Clark and F. Marti, “Cyclotrons for Radioactive Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 557-560. 
[n]	D. J. Clark, “A 600 MeV Cyclotron for Radioactive Beam Production”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1724-1727. 
[n]	Y. M. Pischalnikov, E. Borissov, T. N. Khabiboulline, L. Ristori, and W. Schappert, “A Tuner for a 325 MHz SRF Spoke Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO043, pp. 675-678. 
[n]	J. D. Hepburn and W. L. Michel, “A Microprocessor-Controlled Bead Puller for RF Cavity Measurements”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B08, pp. 56-58. 
[n]	Q. M. Duan and Y. L. Yang, “The Development of Tune Measurement System Based on FPGA at HLSII Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 305-308. doi:10.18429/JACoW-IPAC2017-MOPAB080
[n]	S. P. Antipov, E. Gomez, R. Celestre, and T. Roth, “Diamond Refractive Optics Fabrication by Laser Ablation and at-Wavelength Testing”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 59. doi:10.18429/JACoW-MEDSI2020-MOPC03
[n]	P. Baudrenghien, T. Linnecar, D. Stellfeld, and U. Wehrle, “SPS Beams for LHC: RF Beam Control to Minimize Rephasing in the SPS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02H, pp. 1702-1704. 
[n]	W. X. Cheng, B. Bacha, Y. Hu, O. Singh, H. Xu, and D. Teytelman, “Commissioning of Bunch-by-Bunch Feedback System for NSLS2 Storage Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD27, pp. 707-711. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search