Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. H. Han et al., “Beam Operation of the PAL-XFEL Injector Test Facility”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEB02, pp. 615-622.
[n] V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199.
[n] E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
[n] F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 403. doi:10.18429/JACoW-ICALEPCS2019-MOPHA085
[n] P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
[n] G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1251-1253. doi:10.18429/JACoW-IPAC2018-TUPMF003
[n] M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_049.
[n] G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
[n] G. Arduini, K. Cornelis, G. Ferioli, L. Jensen, and F. Zimmermann, “Transverse Instabilities of the LHC Proton Beam in the SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B02, pp. 341-343.
[n] T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2249-2251. doi:10.18429/JACoW-IPAC2021-TUPAB322
[n] O. Gr, “Beam Induced Multipacting”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
[n] X. Zhang, V. Kamerdzhiev, A. L. Romanov, V. D. Shiltsev, and A. Valishev, “Tevatron Electron Lens and its Applications”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THM1MCCO02, pp. 103-106.
[n] I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2910-2913. doi:10.18429/JACoW-IPAC2017-WEPIK002
[n] N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
[n] M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Challenges and Possibilities for Improvement”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 611-614. doi:10.18429/JACoW-IPAC2017-MOPIK045
[n] S. J. Bean et al., “A Novel Vacuum Chamber Design for the APS Upgrade of the 26-ID Nanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 296. doi:10.18429/JACoW-MEDSI2020-WEPB15
[n] M. Bassetti et al., “A.L.A. - A 1.2 GeV High Luminosity Electron-Positron Storage Ring Design Study”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3249-3252.
[n] H. Aksakal, A. K. Ciftci, D. Schulte, and F. Zimmermann, “Photon-Nucleon Collider Based on LHC and CLIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP010, pp. 1207-1209.
For LaTeX
Use Complete Form
For BibTeX
References
- J. H. Han et al., “Beam Operation of the PAL-XFEL Injector Test Facility”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper WEB02, pp. 615-622.
- V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199.
- E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
- F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 403.
- P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
- G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1251-1253.
- M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_049.
- G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
- G. Arduini, K. Cornelis, G. Ferioli, L. Jensen, and F. Zimmermann, “Transverse Instabilities of the LHC Proton Beam in the SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B02, pp. 341-343.
- T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2249-2251.
- O. Gr, “Beam Induced Multipacting”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
- X. Zhang, V. Kamerdzhiev, A. L. Romanov, V. D. Shiltsev, and A. Valishev, “Tevatron Electron Lens and its Applications”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper THM1MCCO02, pp. 103-106.
- I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2910-2913.
- N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
- M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Challenges and Possibilities for Improvement”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 611-614.
- S. J. Bean et al., “A Novel Vacuum Chamber Design for the APS Upgrade of the 26-ID Nanoprobe”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 296.
- M. Bassetti et al., “A.L.A. - A 1.2 GeV High Luminosity Electron-Positron Storage Ring Design Study”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3249-3252.
- H. Aksakal, A. K. Ciftci, D. Schulte, and F. Zimmermann, “Photon-Nucleon Collider Based on LHC and CLIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP010, pp. 1207-1209.
Back to search
