Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Zhang, “Progress of The HIAF Control System”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper MOPV007, unpublished.
[n] G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
[n] C. C. Peters and A. P. Shishlo, “Pattern Based Parameter Setup of the SNS Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2276-2278. doi:10.18429/JACoW-IPAC2021-TUPAB329
[n] Y. T. Yuan, K. Fan, and Y. Jiang, “Cylindrical Cavity Design and Particle-Tracking Simulation in Cyclotron Auto-Resonance Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3689-3692. doi:10.18429/JACoW-IPAC2019-THPGW047
[n] R. Lange, R. A. Elliot, B. Kuner, K. Vestin, C. Winkler, and D. Zimoch, “Integrating OPC UA Devices in EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 184-187. doi:10.18429/JACoW-ICALEPCS2021-MOPV026
[n] S. Lauber, W. A. Barth, R. Kalleicher, M. Miski-Oglu, and S. Yaramyshev, “Alternating Phase Focusing Under Influence of Space Charge Defocusing”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 377-381. doi:10.18429/JACoW-HB2023-THA2C4
[n] A. J. Mendez, J. B. Ball, D. Dowling, S. W. Mosko, and B. A. Tatum, “The Oak Ridge Isochronous Cyclotron Refurbishment Project”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP237, pp. 1930-1932.
[n] M. Komiyama et al., “Performance Verification of New Machine Protection System Prototype for RIKEN RI Beam Factory”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 742-745. doi:10.18429/JACoW-ICALEPCS2021-WEPV038
[n] J. W. Baehr et al., “Upgrades of the Laser Beam-line at PITZ”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP034, pp. XX-XX.
[n] T. L. Owens and E. S. McCrory, “The Delta-T Tuneup Procedure for the Fermilab Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH448, pp. 721-723.
[n] C. Tsiplaki Spiliopoulou, E. Blanco Vinuela, and B. Fernandez Adiego, “Experience With Static PLC Code Analysis at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1787-1791. doi:10.18429/JACoW-ICALEPCS2017-THPHA160
[n] H. C. Chao, “Design Status of DESY IV ÔÇô Booster Upgrade for PETRA IV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 331-334. doi:10.18429/JACoW-IPAC2019-MOPGW092
[n] P. Arcioni, M. Bressan, and L. Perregrini, “A New 3-D Electromagnetic Solver for the Design of Arbitrarily Shaped Accelerating Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 772-775.
[n] D. Proch, “Storage Ring Beam Tests”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A03, pp. XX-XX.
[n] J. P. Schapira, S. Brandenburg, and P. Mandrillon, “Axial Injection System for the Superconducting Cyclotron AGOR”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-08, pp. 495-498.
[n] E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 307-312.
[n] J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 238-240. doi:10.18429/JACoW-MEDSI2018-WEPH16
[n] P. H. Nallin, J. G. R. S, G. F. Freitas, and R. W. Polli, “Expandable and Modular Monitoring and Actuation System for Engineering Cabinets at Sirius Light Source”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 710-714. doi:10.18429/JACoW-ICALEPCS2021-WEPV027
For LaTeX
Use Complete Form
For BibTeX
References
- W. Zhang, “Progress of The HIAF Control System”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper MOPV007, unpublished.
- G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
- C. C. Peters and A. P. Shishlo, “Pattern Based Parameter Setup of the SNS Linac”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2276-2278.
- Y. T. Yuan, K. Fan, and Y. Jiang, “Cylindrical Cavity Design and Particle-Tracking Simulation in Cyclotron Auto-Resonance Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3689-3692.
- R. Lange, R. A. Elliot, B. Kuner, K. Vestin, C. Winkler, and D. Zimoch, “Integrating OPC UA Devices in EPICS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 184-187.
- S. Lauber, W. A. Barth, R. Kalleicher, M. Miski-Oglu, and S. Yaramyshev, “Alternating Phase Focusing Under Influence of Space Charge Defocusing”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THA2C4, pp. 377-381.
- A. J. Mendez, J. B. Ball, D. Dowling, S. W. Mosko, and B. A. Tatum, “The Oak Ridge Isochronous Cyclotron Refurbishment Project”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP237, pp. 1930-1932.
- M. Komiyama et al., “Performance Verification of New Machine Protection System Prototype for RIKEN RI Beam Factory”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 742-745.
- J. W. Baehr et al., “Upgrades of the Laser Beam-line at PITZ”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP034, pp. XX-XX.
- T. L. Owens and E. S. McCrory, “The Delta-T Tuneup Procedure for the Fermilab Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH448, pp. 721-723.
- C. Tsiplaki Spiliopoulou, E. Blanco Vinuela, and B. Fernandez Adiego, “Experience With Static PLC Code Analysis at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1787-1791.
- H. C. Chao, “Design Status of DESY IV ÔÇô Booster Upgrade for PETRA IV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 331-334.
- P. Arcioni, M. Bressan, and L. Perregrini, “A New 3-D Electromagnetic Solver for the Design of Arbitrarily Shaped Accelerating Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 772-775.
- D. Proch, “Storage Ring Beam Tests”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A03, pp. XX-XX.
- J. P. Schapira, S. Brandenburg, and P. Mandrillon, “Axial Injection System for the Superconducting Cyclotron AGOR”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-08, pp. 495-498.
- E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 307-312.
- J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 238-240.
- P. H. Nallin, J. G. R. S, G. F. Freitas, and R. W. Polli, “Expandable and Modular Monitoring and Actuation System for Engineering Cabinets at Sirius Light Source”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 710-714.
Back to search