Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Singh, P. Forck, P. Kowina, and A. Reiter, “Digital Processing of Pick-up Signals for Position and Tune Determination”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 321-326. doi:10.18429/JACoW-IBIC2015-TUPB010
[n] O. K. Anisimov et al., “Status of Cyclotron Facility in Alma-Ata”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-07, pp. 1912-1914.
[n] A. Reiter, A. Peters, and M. Schwickert, “Integrated Beam Diagnostics Systems for HICAT and CNAO”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH015, pp. 1028-1030.
[n] H. Iinuma et al., “Results from validation experiment for three-dimensional spiral beam injection scheme”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM099, unpublished.
[n] H. Henschel Euskirchen, M. K?Ârfer Hamburg, and F. Wulf Hahn-Meitner Institut, “Fibre Optical Radiation Sensing System for TESLA”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT04, pp. XX-XX.
[n] A. Oeftiger, H. Bartosik, A. Findlay, S. Hancock, and G. Rumolo, “Flat Bunches with a Hollow Distribution for Space Charge Mitigation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 652-655. doi:10.18429/JACoW-IPAC2016-MOPOR023
[n] J. F. Zhang, P. Bambade, A. Faus-Golfe, H. Monard, and A. Loulergue, “Increasing the Dynamic and Momentum Apertures of the ThomX Ring by Means of Octupole Correctors”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 121-124. doi:10.18429/JACoW-IPAC2015-MOPWA016
[n] M. Borland et al., “The Upgrade of the Advanced Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2872-2877. doi:10.18429/JACoW-IPAC2018-THXGBD1
[n] S. G. Yaramyshev et al., “Advanced Beam Matching to a High Current RFQ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP059, pp. 559-562.
[n] E. N. Zaplatin, T. L. Grimm, A. Kanareykin, and V. P. Yakovlev, “Progress on Euclid SRF Conical Half-Wave Resonator Project”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP055, pp. 547-549.
[n] M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5095-5098. doi:10.18429/JACoW-IPAC2023-THPM093
[n] J. H. Li and Z. Li, “The Simulation and Manufacture of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3811-3814. doi:10.18429/JACoW-IPAC2015-THPF049
[n] N. Bazin et al., “Cavity Development for the Linear IFMIF Prototype Accelerator”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOD03, pp. 878-883.
[n] E. Metral et al., “Transverse Impedance of LHC Collimators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOAC03, pp. 2003-2005.
[n] F. Naito et al., “Study of the ACS Cavity Without a Bridge Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP073, pp. 596-598.
[n] S. F. Mikhailov et al., “Multibunch Injection Scheme for the Duke Booster Synchrotron for Top-Off Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP066, pp. 1238-1240.
[n] G. M. Kazakevich et al., “Multi-purpose 805 MHz Pillbox RF Cavity for Muon Acceleration Studies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP092, pp. 1003-1005.
[n] C. Christou and V. C. Kempson, “Operation of the Diamond Light Source Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN086, pp. 1112-1114.
[n] B. Salvachua et al., “LHC Operational Scenarios During 2017 Run”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 220-223. doi:10.18429/JACoW-IPAC2018-MOPMF051
For LaTeX
Use Complete Form
For BibTeX
References
- R. Singh, P. Forck, P. Kowina, and A. Reiter, “Digital Processing of Pick-up Signals for Position and Tune Determination”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 321-326.
- O. K. Anisimov et al., “Status of Cyclotron Facility in Alma-Ata”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-07, pp. 1912-1914.
- A. Reiter, A. Peters, and M. Schwickert, “Integrated Beam Diagnostics Systems for HICAT and CNAO”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH015, pp. 1028-1030.
- H. Iinuma et al., “Results from validation experiment for three-dimensional spiral beam injection scheme”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM099, this conference.
- H. Henschel Euskirchen, M. K?Ârfer Hamburg, and F. Wulf Hahn-Meitner Institut, “Fibre Optical Radiation Sensing System for TESLA”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT04, pp. XX-XX.
- A. Oeftiger, H. Bartosik, A. Findlay, S. Hancock, and G. Rumolo, “Flat Bunches with a Hollow Distribution for Space Charge Mitigation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 652-655.
- J. F. Zhang, P. Bambade, A. Faus-Golfe, H. Monard, and A. Loulergue, “Increasing the Dynamic and Momentum Apertures of the ThomX Ring by Means of Octupole Correctors”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 121-124.
- M. Borland et al., “The Upgrade of the Advanced Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2872-2877.
- S. G. Yaramyshev et al., “Advanced Beam Matching to a High Current RFQ”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP059, pp. 559-562.
- E. N. Zaplatin, T. L. Grimm, A. Kanareykin, and V. P. Yakovlev, “Progress on Euclid SRF Conical Half-Wave Resonator Project”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP055, pp. 547-549.
- M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM093, pp. 5095-5098.
- J. H. Li and Z. Li, “The Simulation and Manufacture of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3811-3814.
- N. Bazin et al., “Cavity Development for the Linear IFMIF Prototype Accelerator”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THIOD03, pp. 878-883.
- E. Metral et al., “Transverse Impedance of LHC Collimators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOAC03, pp. 2003-2005.
- F. Naito et al., “Study of the ACS Cavity Without a Bridge Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP073, pp. 596-598.
- S. F. Mikhailov et al., “Multibunch Injection Scheme for the Duke Booster Synchrotron for Top-Off Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP066, pp. 1238-1240.
- G. M. Kazakevich et al., “Multi-purpose 805 MHz Pillbox RF Cavity for Muon Acceleration Studies”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP092, pp. 1003-1005.
- C. Christou and V. C. Kempson, “Operation of the Diamond Light Source Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN086, pp. 1112-1114.
- B. Salvachua et al., “LHC Operational Scenarios During 2017 Run”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 220-223.
Back to search