JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. Filimonov, S. Karnaev, B. Levichev, and S. Smirnov, “Database and Channel Access on the VEPP-4 Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP029, pp. XX-XX. 
[n]	J. Norem et al., “Progress in Modeling Arcs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB013, pp. 3260-3262. 
[n]	V. G. Dudnikov, R. J. Abrams, and M. A. Cummings, “Mirascope Residual-Gas Luminescent Beam Profile Monitors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2291-2294. doi:10.18429/JACoW-IPAC2018-WEPAL051
[n]	S. A. Kahn, J. Escallier, R. C. Gupta, G. Jochen, and Y. Shiroyanagi, “Fabrication and Testing of Curved Test Coil for FRIB Fragment Separator Dipole”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD044, pp. 3611-3613. 
[n]	L. Wang, G. Feng, W. Li, L. Liu, H. Xu, and S. C. Zhang, “The Nonlinear Effects of Fringe Fields in HLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN059, pp. 1061-1063. 
[n]	G. P. Tsironis, T. Chen, and S. Peggs, “Tune Modulation, Mathieu Stability and the Driven Pendulum”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1753-1756. 
[n]	H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2927-2930. doi:10.18429/JACoW-IPAC2015-WEPMN008
[n]	M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325. 
[n]	L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2584-2586. doi:10.18429/JACoW-IPAC2019-WEPGW046
[n]	W. Li et al., “The Operation Status of HLS (Hefei Light Source)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN058, pp. 1058-1060. 
[n]	S. S. Serednyakov, E. N. Dementyev, A. S. Medvedko, E. Shubin, V. G. Tcheskidov, and N. Vinokurov, “Software and Capabilities of the Beam Position Measurement System for Novosibirsk Free Electron Laser”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU001, pp. 422-424. 
[n]	S. Xu, R. Laird, F. Lenkszus, H. Shang, and C. Yao, “Fault Diagnosis of the APS Real-time Orbit Feedback System Based on FTA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB048, pp. 2800-2802. 
[n]	G. A. Krafft et al., “Measuring and Adjusting the Path Length at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WXE01, pp. 2429-2431. 
[n]	B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211. 
[n]	S. A. Kahn and R. C. Gupta, “Radiation-tolerant Multipole Correction Coils for FRIB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD043, pp. 3608-3610. 
[n]	J. D. Zumbro et al., “Measurements of Quadrupole Magnets for the MIT-bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2125-2128. 
[n]	P. Cameron et al., “RHIC Third Generation PLL Tune System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB009, pp. 524-526. 
[n]	J. R. Noonan, J. Gagliano, G. A. Groeppner, R. A. Rosenberg, and D. R. Walters, “APS Storage Ring Vacuum System Performance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C003, pp. 3552-3555. 
[n]	L. Kang, Z. X. He, H. Qu, J. B. Yu, and Y. Q. Zou, “Application of Electropolishing in CSNS/RCS Primary Collimator Scrapers”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI024, pp. 3348-3350. 
[n]	H. J. Wang, L. Kang, R. H. Liu, H. Qu, and D. H. Zhu, “The Structure Design and Analysis of Proton Beam Window for CSNS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI029, pp. 3361-3363. 
[n]	H. J. Wang, L. Kang, R. H. Liu, H. Qu, and D. H. Zhu, “The Design and Analysis of Proton Beam Window for CSNSIII”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI032, pp. 3367-3369. 
[n]	N. Merminga et al., “Nonlinear Dynamics Experiment in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1429-1432. 
[n]	A. Aimidula et al., “Design of a Photonic Crystal Accelerator for Basic Radiation Biology”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA065, pp. 1283-1285. 
[n]	L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745. 
[n]	R. H. Liu, L. Kang, H. Qu, G. Y. Wang, H. J. Wang, and J. S. Zhang, “Study of the Vibration of the AC Dipole and Magnetic Measurement Girder for CSNS/RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME023, pp. 2980-2982. 
[n]	L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311. 
[n]	T. Chen, “Correct Chromaticities of Circular Accelerators without Sextupoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP088L, pp. 992-994. 
[n]	J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4562-4564. doi:10.18429/JACoW-IPAC2017-THPVA054
[n]	P. Cameron et al., “Tune Feedback at RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH032, pp. 1294-1296. 
[n]	D. Hardy, J. Tang, R. Legg, M. Tiefenback, M. Crofford, and G. A. Krafft, “Automated Path Length and M$_{56}$ Measurements at Jefferson Lab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P070, pp. 2265-2267. 
[n]	P. Cameron et al., “PLL Tune Measurement during RHIC 2001”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI072, pp. 1855-1857. 
[n]	J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308. 
[n]	H. Hao et al., “Theoretical Study of Medium Emittance Lattice at HLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN055, pp. 3351-3353. 
[n]	M. Kesselman, P. Cameron, and J. Cupolo, “Resonant BPM for Continuous Tune Measurement in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH060, pp. 1357-1359. 
[n]	X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 92-94. doi:10.18429/JACoW-MEDSI2018-TUPH27
[n]	Y. Ivanyushenkov and K. C. Harkay, “Experience of Operating a Superconducting Undulator at the Advanced Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2053-2055. doi:10.18429/JACoW-IPAC2014-WEPRO049
[n]	J. B. Yu, He. He, L. Kang, H. Qu, and Y. Q. Zou, “Development of Beam Collimators for the 1.6 GeV Rapid Cycling Synchrotron of CSNS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI031, pp. 3364-3366. 
[n]	T. Chen, J. Irwin, and R. H. Siemann, “New Physics and Improvements in Beam-beam Tail Simulations”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP087L, pp. 1167-1169. 
[n]	T. Russ, Z. Radouch, and C. Sibley, “A Local Area Computer for Data Acquisition and Control”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1669-1672. 
[n]	J. Norem, L. Bandura, E. Black, M. A. C. Cummings, and D. Errede, “Measurements of Beam Driven Hydrodynamic Turbulence”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE026, pp. 1999-2001. 
[n]	J. B. Yu et al., “Operation Status of CSNS/RCS Transverse Collimation System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1862-1864. doi:10.18429/JACoW-IPAC2021-TUPAB194
[n]	V. L. Smirnov and S. B. Vorozhtsov, “SNOP ÔÇô Beam Dynamics Analysis Code for Compact Cyclotrons”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB008, pp. 325-327. 
[n]	S. M. Shajedul Hasan, J. Tang, K. Kasemir, Y. W. Kang, M. Crofford, and M. K. Howlader, “EPICS Based High Power RF Conditioning Control System for the SNS Accelerator RF Test Facility”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_003. 
[n]	J. H. Wang et al., “Transverse Feedback System and Instability Analysis at HLS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP104, pp. 1674-1676. 
[n]	C. Sibley and E. Bjorklund, “The SNS Run Permit System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP023, pp. XX-XX. 
[n]	Y. Ivanyushenkov, “A Concept of a Universal Superconducting Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2050-2052. doi:10.18429/JACoW-IPAC2014-WEPRO048
[n]	M. D. Balcazar et al., “Tunable Q-Factor Gas-Filled RF Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2064-2066. doi:10.18429/JACoW-IPAC2018-WEPAG002
[n]	R. Valdiviez et al., “The Final Mechanical Design, Fabrication, and Commissioning of a Wire Scanner and  Scraper Assembly for Halo-Formation Measurements in a Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH045, pp. 1324-1326. 
[n]	P. Cameron et al., “Schottky Measurements During RHIC 2000”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH030, pp. 1291-1293. 
[n]	S. Reiche and E. Prat, “Growth Rates and Coherence Properties of FODO-lattice based X-ray Free Electron Lasers”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOOC02, pp. 25-28. 
[n]	V. Shiltsev et al., “VLHC/NLC Slow Ground Motion Studies in Illinois”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH111, pp. 1470-1472. 
[n]	M. White et al., “Magnets, Supports, and Controls for the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH088, pp. 452-454. 
[n]	S. Kohara et al., “Model Study of a Resonator for a Flat-Top Acceleration System in the RIKEN AVF Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-18, pp. 219-222. 
[n]	T. Chen and S. Peggs, “The Driven Pendulum, and E778 Tune Modulation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1343-1346. 
[n]	G. Pile et al., “Design and Construction of the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THAAU01, pp. 460-466. 
[n]	Y. Wang, A. H. Regan, T. S. Rohlev, M. Prokop, and D. Thomson, “SNS Superconducting Cavity Modeling: Iterative Learning Control”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC13, pp. 521-523. 
[n]	R. C. Gupta, “Conceptual Magnetic Design of the Large Aperture D2 Dipole for LHC Upgrade”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2737-2739. doi:10.18429/JACoW-IPAC2014-WEPRI102
[n]	L. Kang et al., “Introduction About Key Techniques of Critical Equipment in CSNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4548-4550. doi:10.18429/JACoW-IPAC2017-THPVA049
[n]	R. C. Gupta, M. Anerella, J. P. Cozzolino, A. K. Jain, J. F. Muratore, and P. Wanderer, “Iron Shims outside the Helium Vessel to Adjust Field Quality at High Fields”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2734-2736. doi:10.18429/JACoW-IPAC2014-WEPRI101
[n]	R. Nelson, B. Oerter, T. Shea, and C. Sibley, “SNS Timing System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRAT001, pp. XX-XX. 
[n]	T. Russ, A. Carter, Z. Radouch, and C. Sibley, “The Bates Pulse Stretcher Ring Control System Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 85-88. 
[n]	M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2515-2518. 
[n]	J. D. Gilpatrick et al., “Experience with the Low Energy Demonstration Accelerator (LEDA) Halo Experiment Beam Instrumentation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH097, pp. 2311-2313. 
[n]	C. Sibley and J. Galambos, “Beam Loss Management and Machine Protection in Beam Commissioning”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAZ05, pp. XX-XX. 
[n]	L. M. Onischenko et al., “Compact Cyclotron as a Proton Source for the Detection of Explosives Based on Nuclear Resonance Absorption in Nitrogen”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC020, pp. 363-365. 
[n]	M. Crofford, C. Hovater, G. Lahti, C. Piller, and M. Poelker, “The RF System for the CEBAF Polarized Photoinjector”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4067, pp. 552-554. 
[n]	A. Braido et al., “Improving the phase stability of the 201.25 MHz BPPM reference for the LANSCE 805 MHz LINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4779-4782. doi:10.18429/JACoW-IPAC2023-THPL132
[n]	P. C. Wang, X. Sun, S. Liu, C. Meng, H. Wang, and D. H. Zhu, “Gas Permeability Measurement of Graphene Films”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2856-2859. doi:10.18429/JACoW-IPAC2018-WEPML072
[n]	S. Xu, R. Laird, F. Lenkszus, and H. Shang, “EPICS IOCcore Real-Time Performance Measurements on Coldfire Module”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL033, pp. 94-96. 
[n]	A. Ratti et al., “The Design and Performance of the Spallation Neutron Source Low-Level RF Control System”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP44, pp. 703-705. 
[n]	L. Wang, G. Feng, W. Li, L. Liu, H. Xu, and S. C. Zhang, “A Low Emittance Lattice Design for HLS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN060, pp. 1064-1066. 
[n]	S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n]	V. L. Smirnov and S. B. Vorozhtsov, “A Coupled Cyclotron Solution for Carbon Ions Acceleration”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 270-273. doi:10.18429/JACoW-Cyclotrons2016-WEB04
[n]	T. Chen, J. Irwin, and R. Siemann, “Simulation of Beam-Beam Lifetime for LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1356-1359. 
[n]	D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX. 
[n]	T. Hara, H. Tanaka, and K. Togawa, “Progress in SACLA Operation”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOOB03, pp. 5-8. 
[n]	O. Calvo, C. Sibley, and T. Russ, “High Stability Switching Mode Power Converters for Magnet Loads”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU466, pp. 493-495. 
[n]	J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892. 
[n]	S. A. Kahn and R. C. Gupta, “High Radiation Environment Nuclear Fragment Separator Dipole Magnet”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD042, pp. 3605-3607. 
[n]	J. Bahrdt and Y. Ivanyushenkov, “Effects of Geometrical Errors on the Field Quality in a Planar Superconducting Undulator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP065, pp. 708-710. 
[n]	L. Doolittle, C. C. Lo, M. Monroy, and A. Ratti, “The SNS Front End LLRF System”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU428, pp. 371-373. 
[n]	T. Chen, Y. J. Pei, and Y. Song, “Design and Simulation of a C-Band Photocathode RF Gun With a Coaxial Coupler for UEM”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 525-527. doi:10.18429/JACoW-IPAC2017-MOPIK013
[n]	B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337. 
[n]	M. E. Gruchalla et al., “Beam Profile Wire-Scanner/Halo-Scraper Sensor Analog Interface Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH098, pp. 2314-2316. 
[n]	J. D. Gilpatrick et al., “Beam-Profile Instrumentation for Beam-Halo Measurement: Overall Description and Operation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB004, pp. 525-527. 
[n]	J. F. Power, S. S. Kurennoy, J. F. O'Hara, M. A. Plum, and M. Stettler, “Beam Position Monitors for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH070, pp. 1375-1377. 
[n]	G. Geloni, V. Kocharyan, and E. Saldin, “On Quantum Effects in Spontaneous Emission by a Relativistic Electron Beam in an Undulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOOC03, pp. 29-32. 
[n]	B. K. Stillwell et al., “Conceptual Design and Analysis of a Storage Ring Beam Position Monitor for the APS Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1170-1172. doi:10.18429/JACoW-IPAC2015-MOPWI012
[n]	D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582. 
[n]	R. Abbott et al., “Design, Commissioning and Operation of the Upgraded CEBAF Injector (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-30, pp. 777-779. 
[n]	E. A. Bekhtenev, G. V. Karpov, and E. Shubin, “The TNK Beam Position Monitor System”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA032, pp. 110-112. 
[n]	G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 277-279. doi:10.18429/JACoW-MEDSI2018-WEPH32
[n]	W. Chou, “Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A3, pp. 95-98. 
[n]	H. Wang, C. Meng, H. Qu, D. H. Zhu, X. Sun, and P. C. Wang, “Primary Study of High-Power Graphene Beam Window”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 47-50. doi:10.18429/JACoW-IPAC2018-MOZGBE3
[n]	V. G. Dudnikov, M. A. Cummings, R. P. Johnson, and A. V. Sy, “Polarized Deuteron Negative Ion Source for Nuclear Physics Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4665-4667. doi:10.18429/JACoW-IPAC2018-THPML009

For LaTeX

Use Complete Form

For BibTeX

References

Back to search