Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Lanza, V. Baglin, G. Bregliozzi, and P. Chiggiato, “LHC Experimental Beam Pipe Upgrade during LS1”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2366-2368. doi:10.18429/JACoW-IPAC2014-WEPME044
[n] N. Yamamoto, K. Oide, and K. Hirata, “Pulse-to-Pulse Simulation of Orbit Feedback for JLC Final Focus System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 466-469.
[n] G. Pedrocchi et al., “A C-Band RF Mode Launcher with Quadrupole Field Components Cancellation for High Brightness Applications”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3638-3641. doi:10.18429/JACoW-IPAC2021-WEPAB398
[n] A. Gerbershagen, D. Schulte, and P. Burrows, “CLIC Recombination Scheme for the Low Energy Operation Mode”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR024, pp. 1864-1866.
[n] Y. Iwashita et al., “One Year Operation of the 7 MeV Proton Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1697-1700.
[n] T. Katayama and K. Ohtomo, “Injection Simulation Study at Accumulator Cooler Ring at RI Beam Factory”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP06B, pp. 2126-2128.
[n] A. Calia, K. Fuchsberger, and M. Hostettler, “Testing the Untestable: A Realistic Vision of Fearlessly Testing (Almost) Every Single Accelerator Component Without Beam and Continuous Deployment Thereof”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 399-402. doi:10.18429/JACoW-IBIC2016-TUPG30
[n] R. Yamada, J. Kishiro, Y. Shimosaki, K. Takayama, T. Toyama, and M. Wake, “62-TeV Center of Mass Hadron Collider with Capability for Super Bunch Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH138, pp. 3174-3176.
[n] A. Gamp et al., “Experience with the Control of the Vector Sum at the TESLA Test Facility”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP38G, pp. 1738-1740.
[n] V. Blackmore, “The Physics Programme of Next MICE Step IV”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP097, pp. 285-287.
[n] P. Mutti, M. Plaz, E. Ruiz-Martinez, and P. Van Esch, “New Digitisers for Position Sensitive 3He Proportional Counters”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 893-896. doi:10.18429/JACoW-ICALEPCS2015-WEPGF084
[n] L. J. Nevay et al., “Beam Delivery Simulation: BDSIM - Development & Optimisation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 182-184. doi:10.18429/JACoW-IPAC2014-MOPRO045
[n] D. L. Rubin, “Results of the CESR Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEX02B, pp. 43-47.
[n] L. M. A. Ferreira, H. Rana, and J. A. Shirra, “Electropolishing Simulation on Full Scale Radio Frequency Elliptical Structures”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP029, pp. 898-900.
[n] K. Ohmi and S. Matsumoto, “Beam-Ion Instability in a Magnetic Field”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D022, pp. 438-440.
[n] D. Noelle, H. Quick, and T. Schmidt, “Progress of the FELICITA I Free-Electron-Laser Experiment at DELTA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21F, pp. 667-669.
[n] N. V. Mokhov, A. I. Drozhdin, and G. W. Foster, “Beam-Induced Energy Deposition Issues in the Very Large Hadron Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH137, pp. 3171-3173.
[n] J. W. Amann et al., “Design of an 18 MW Beam Dump for 500 GeV Electron/Positron Beams at an ILC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE003, pp. 3341-3343.
[n] T. Furukawa et al., “Fast Raster Scanning System for HIMAC New Treatment Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA007, pp. 76-78.
[n] E. Keil, “Beam-Beam Effects in Electron and Proton Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1731-1736.
[n] H. K. Sayed, H. G. Kirk, and K. T. McDonald, “Optimization of the Capture Section of a Staged Neutrino Factory”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO11, pp. 1325-1327.
[n] K. Sinclair, “Recent Advances in Polarized Electron Sources”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOCR1, pp. 65-69.
[n] H. Mainaud Durand et al., “PACMAN Project: A New Solution for the High-accuracy Alignment of Accelerator Components”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 58-61. doi:10.18429/JACoW-IPAC2016-MOOCB01
[n] F. Zimmermann et al., “Linear & Nonl. Optics Checks during LHC Injection Tests”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP026, pp. 2546-2548.
[n] M. Karmakar and S. Sengupta, “Particle Aceeleration by electrostatic standing wave generated in the superposition of two counter propagating relativistic whistler waves”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA048, unpublished.
[n] N. V. Mokhov, A. I. Drozhdin, and M. A. Kostin, “Beam Collimation and Machine-Detector Interface at the International Linear Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP048, pp. 2995-2997.
[n] H. Nishimura and W. E. Byrne, “Simulation and Automation of the EEBI Test at ALS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE060, pp. 3485-3486.
[n] M. Kinsho, J. Kusano, M. Mizumoto, and F. Noda, “A Conceptual Design of the Proton Storage Ring for the Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP34F, pp. 844-846.
[n] K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1568-1570. doi:10.18429/JACoW-IPAC2014-TUPRI008
[n] J. B. McCaslin, P. R. LaPlant, A. R. Smith, W. P. Swanson, and R. H. Thomas, “Neutron Production by Ne and Si Ions on a Thick Cu Target at 670 MeV x A with Application to Radiation Protection”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3104-3107.
[n] E. Gianfelice-Wendt, “Simulations of Polarization Levels and Spin Tune Biases in High Energy Leptons Storage Rings”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 43-46. doi:10.18429/JACoW-eeFACT2016-MOT4H6
[n] K. Ogawa, H. Tomizawa, S. Matsubara, and Y. Okayasu, “Development of 3D EO-Sampling System for the Ultimate Temporal Resolution”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA20, pp. 98-100.
[n] A. Noda et al., “Recent Status of Beam Cooling at S-LSR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper MOIO06, pp. 19-24.
[n] J. A. Johnstone, M. Syphers, S. Peggs, and S. Tepikian, “Lattice Design of the VLHC Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH134, pp. 3162-3164.
[n] Y. Iwashita, A. Noda, H. Okamoto, T. Shirai, and M. Inoue, “Cold Model Test of Biperiodic L-Support Disk-and-Washer Linac Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA18, pp. 1093-1095.
[n] A. Faus-Golfe, “Feasibility Study For A High-Beta Insertion Optics in the LHC for the TOTEM Experiment”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07D, pp. 338-340.
[n] G. Bisoffi et al., “Prototype of a Superconducting RFQ for a Heavy Ion Injector Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W023, pp. 1087-1089.
[n] V. Blackmore, “Recent Results from the Study of Emittance Evolution in MICE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1699-1701. doi:10.18429/JACoW-IPAC2018-TUPML067
[n] N. V. Mokhov, A. I. Drozhdin, I. L. Rakhno, M. Gyr, and E. Weisse, “Protecting LHC Components against Radiation Resulting from an Unsynchronized Beam Abort”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH136, pp. 3168-3170.
[n] A. Antoniazzi, R. Bachelard, C. Chandre, D. Fanelli, and M. Vittot, “Control Chaotic Diffusion in a Single Pass Free Electron Laser”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP012, pp. XX-XX.
[n] M. Masuda, S. Matsumoto, and T. Shintomi, “Flicker Suppressor by Thyristor”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1306-1309.
[n] R. A. Marsh et al., “LLNL X-band Test Station Commissioning and X-ray Status”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2992-2994. doi:10.18429/JACoW-IPAC2014-THPRO054
[n] A. I. Drozhdin, Yu. S. Fedotov, M. A. Maslov, N. V. Mokhov, and I. A. Yazynin, “Calculation of Losses and Protection Against Irradiation During Beam Abort and Loss Localization in the UNK”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 255-258.
[n] V. Blackmore, J. H. Cobb, M. Dawson, J. Tacon, and M. Tacon, “Particle Tracking and Beam Matching Through the New Variable Thickness MICE Diffuser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP023, pp. 154-156.
[n] Y. Wu, “BEPC Upgrades and Tau-Charm Factory Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEX03B, pp. 48-52.
[n] T. Suwada, S. Ohsawa, K. Furukawa, N. Akasaka, and K. Oide, “Recalibration of a Wall-Current Monitor using a Faraday Cup for the KEKB Injector Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA162, pp. 2238-2240.
[n] M. Kando et al., “Matching Section to the RFQ Using Permanent Magnet Symmetric Lens”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ01, pp. 1843-1845.
[n] D. Rajaram and V. Blackmore, “Phase Space Density Evolution in MICE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1692-1695. doi:10.18429/JACoW-IPAC2018-TUPML065
For LaTeX
Use Complete Form
For BibTeX
References
- G. Lanza, V. Baglin, G. Bregliozzi, and P. Chiggiato, “LHC Experimental Beam Pipe Upgrade during LS1”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2366-2368.
- N. Yamamoto, K. Oide, and K. Hirata, “Pulse-to-Pulse Simulation of Orbit Feedback for JLC Final Focus System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 466-469.
- G. Pedrocchi et al., “A C-Band RF Mode Launcher with Quadrupole Field Components Cancellation for High Brightness Applications”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3638-3641.
- A. Gerbershagen, D. Schulte, and P. Burrows, “CLIC Recombination Scheme for the Low Energy Operation Mode”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR024, pp. 1864-1866.
- Y. Iwashita et al., “One Year Operation of the 7 MeV Proton Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1697-1700.
- T. Katayama and K. Ohtomo, “Injection Simulation Study at Accumulator Cooler Ring at RI Beam Factory”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP06B, pp. 2126-2128.
- A. Calia, K. Fuchsberger, and M. Hostettler, “Testing the Untestable: A Realistic Vision of Fearlessly Testing (Almost) Every Single Accelerator Component Without Beam and Continuous Deployment Thereof”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 399-402.
- R. Yamada, J. Kishiro, Y. Shimosaki, K. Takayama, T. Toyama, and M. Wake, “62-TeV Center of Mass Hadron Collider with Capability for Super Bunch Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH138, pp. 3174-3176.
- A. Gamp et al., “Experience with the Control of the Vector Sum at the TESLA Test Facility”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP38G, pp. 1738-1740.
- V. Blackmore, “The Physics Programme of Next MICE Step IV”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP097, pp. 285-287.
- P. Mutti, M. Plaz, E. Ruiz-Martinez, and P. Van Esch, “New Digitisers for Position Sensitive 3He Proportional Counters”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 893-896.
- L. J. Nevay et al., “Beam Delivery Simulation: BDSIM - Development & Optimisation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 182-184.
- D. L. Rubin, “Results of the CESR Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEX02B, pp. 43-47.
- L. M. A. Ferreira, H. Rana, and J. A. Shirra, “Electropolishing Simulation on Full Scale Radio Frequency Elliptical Structures”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP029, pp. 898-900.
- K. Ohmi and S. Matsumoto, “Beam-Ion Instability in a Magnetic Field”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D022, pp. 438-440.
- D. Noelle, H. Quick, and T. Schmidt, “Progress of the FELICITA I Free-Electron-Laser Experiment at DELTA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP21F, pp. 667-669.
- N. V. Mokhov, A. I. Drozhdin, and G. W. Foster, “Beam-Induced Energy Deposition Issues in the Very Large Hadron Collider”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH137, pp. 3171-3173.
- J. W. Amann et al., “Design of an 18 MW Beam Dump for 500 GeV Electron/Positron Beams at an ILC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE003, pp. 3341-3343.
- T. Furukawa et al., “Fast Raster Scanning System for HIMAC New Treatment Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA007, pp. 76-78.
- E. Keil, “Beam-Beam Effects in Electron and Proton Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1731-1736.
- H. K. Sayed, H. G. Kirk, and K. T. McDonald, “Optimization of the Capture Section of a Staged Neutrino Factory”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO11, pp. 1325-1327.
- K. Sinclair, “Recent Advances in Polarized Electron Sources”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOCR1, pp. 65-69.
- H. Mainaud Durand et al., “PACMAN Project: A New Solution for the High-accuracy Alignment of Accelerator Components”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 58-61.
- F. Zimmermann et al., “Linear & Nonl. Optics Checks during LHC Injection Tests”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP026, pp. 2546-2548.
- M. Karmakar and S. Sengupta, “Particle Aceeleration by electrostatic standing wave generated in the superposition of two counter propagating relativistic whistler waves”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA048, unpublished.
- N. V. Mokhov, A. I. Drozhdin, and M. A. Kostin, “Beam Collimation and Machine-Detector Interface at the International Linear Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP048, pp. 2995-2997.
- H. Nishimura and W. E. Byrne, “Simulation and Automation of the EEBI Test at ALS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE060, pp. 3485-3486.
- M. Kinsho, J. Kusano, M. Mizumoto, and F. Noda, “A Conceptual Design of the Proton Storage Ring for the Neutron Science Project at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP34F, pp. 844-846.
- K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1568-1570.
- J. B. McCaslin, P. R. LaPlant, A. R. Smith, W. P. Swanson, and R. H. Thomas, “Neutron Production by Ne and Si Ions on a Thick Cu Target at 670 MeV x A with Application to Radiation Protection”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3104-3107.
- E. Gianfelice-Wendt, “Simulations of Polarization Levels and Spin Tune Biases in High Energy Leptons Storage Rings”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 43-46.
- K. Ogawa, H. Tomizawa, S. Matsubara, and Y. Okayasu, “Development of 3D EO-Sampling System for the Ultimate Temporal Resolution”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA20, pp. 98-100.
- A. Noda et al., “Recent Status of Beam Cooling at S-LSR”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper MOIO06, pp. 19-24.
- J. A. Johnstone, M. Syphers, S. Peggs, and S. Tepikian, “Lattice Design of the VLHC Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH134, pp. 3162-3164.
- Y. Iwashita, A. Noda, H. Okamoto, T. Shirai, and M. Inoue, “Cold Model Test of Biperiodic L-Support Disk-and-Washer Linac Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA18, pp. 1093-1095.
- A. Faus-Golfe, “Feasibility Study For A High-Beta Insertion Optics in the LHC for the TOTEM Experiment”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07D, pp. 338-340.
- G. Bisoffi et al., “Prototype of a Superconducting RFQ for a Heavy Ion Injector Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W023, pp. 1087-1089.
- V. Blackmore, “Recent Results from the Study of Emittance Evolution in MICE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1699-1701.
- N. V. Mokhov, A. I. Drozhdin, I. L. Rakhno, M. Gyr, and E. Weisse, “Protecting LHC Components against Radiation Resulting from an Unsynchronized Beam Abort”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH136, pp. 3168-3170.
- A. Antoniazzi, R. Bachelard, C. Chandre, D. Fanelli, and M. Vittot, “Control Chaotic Diffusion in a Single Pass Free Electron Laser”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP012, pp. XX-XX.
- M. Masuda, S. Matsumoto, and T. Shintomi, “Flicker Suppressor by Thyristor”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1306-1309.
- R. A. Marsh et al., “LLNL X-band Test Station Commissioning and X-ray Status”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2992-2994.
- A. I. Drozhdin, Yu. S. Fedotov, M. A. Maslov, N. V. Mokhov, and I. A. Yazynin, “Calculation of Losses and Protection Against Irradiation During Beam Abort and Loss Localization in the UNK”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 255-258.
- V. Blackmore, J. H. Cobb, M. Dawson, J. Tacon, and M. Tacon, “Particle Tracking and Beam Matching Through the New Variable Thickness MICE Diffuser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP023, pp. 154-156.
- Y. Wu, “BEPC Upgrades and Tau-Charm Factory Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEX03B, pp. 48-52.
- T. Suwada, S. Ohsawa, K. Furukawa, N. Akasaka, and K. Oide, “Recalibration of a Wall-Current Monitor using a Faraday Cup for the KEKB Injector Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA162, pp. 2238-2240.
- M. Kando et al., “Matching Section to the RFQ Using Permanent Magnet Symmetric Lens”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAQ01, pp. 1843-1845.
- D. Rajaram and V. Blackmore, “Phase Space Density Evolution in MICE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1692-1695.
Back to search