Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Mishra et al., “Status of ECR Plasma Electron-Ion Numerical Modelling at INFN - From Space-Resolved Population Kinetics to X-Ray Emissivity Analysis”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT8AUCO26, unpublished.
[n] C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 252-254. doi:10.18429/JACoW-LINAC2022-MOPORI11
[n] G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
[n] G. Goin, J. Briaud, and L. Le Polotec, “Status Report on the CNRS Orleans' Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-12, pp. 129-132.
[n] D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
[n] R. C. York and C. Reece, “RF Steering in the CEBAF CW Superconducting Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1307-1310.
[n] K. Elsener et al., “Defection of High Energy Beams by Channeling in Bent Silicon Crystals”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2385-2388.
[n] G. Gaitan et al., “Development of a System for Coating SRF Cavities Using Remote Plasma CVD”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 129. doi:10.18429/JACoW-SRF2021-SUPTEV007
[n] C. R. Hoffmann, “Extraction System Model Experiments for the Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-32, pp. 497-499.
[n] G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
[n] G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
[n] J. Wu, D. Wang, and F. Zhou, “Coherent Synchrotron Radiation Effects in the Electron Cooler for RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG026, pp. 3228-3230.
[n] B. Kaizer, I. Fishman, and I. G. Gertz, “High Power Amplifier Systems for SARAF Phase II”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB092, pp. 675-677.
[n] S. Teixeira Lopez et al., “A Seamless Quarter-wave Resonator for HIE-ISOLDE”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 686-691. doi:10.18429/JACoW-SRF2017-WEYA03
[n] T. Overton, B. Higuera Gonzalez, G. Xia, T. Pacey, and Y. Saveliev, “Quadrupole field instability in cylindrical dielectric wakefield accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 478-481. doi:10.18429/JACoW-IPAC2024-MOPR10
[n] W. Venturini Delsolaro and A. Miyazaki, “Seamless Quarter Wave Resonators for HIE ISOLDE”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 292-296. doi:10.18429/JACoW-LINAC2018-TU1A05
[n] M. Veronese et al., “A Nanofabricated Wirescanner: Design, Fabrication and Experimental Results”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 314-317. doi:10.18429/JACoW-IBIC2017-WE2AB3
[n] E. Karantzoulis, J. Miertusova, F. Pradal, L. Tosi, G. Tromba, and A. Vascotto, “Gas Injection Experiment during ELETTRA Operation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP25, pp. 2316-2318.
[n] F. Bouly, M. Di Giacomo, J. F. Leyge, and M. Tontayeva, “Superconducting Cavity and RF Control Loop Model for the SPIRAL2 Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 767-770. doi:10.18429/JACoW-LINAC2022-THPOPA13
[n] C. Pagani et al., “A High-Current Superconducting Proton Linac for an Accelerator-Driven Transmutation System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W037, pp. 1126-1128.
[n] P. Denham, A. Fisher, P. Musumeci, and R. England, “Ultrafast electron diffraction with adjustable camera length at high energies”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR27, unpublished.
[n] K. Halbach et al., “A Permanent Magnet Undulator for SPEAR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3136-3139.
[n] C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
[n] S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 421-424. doi:10.18429/JACoW-NAPAC2016-TUPOA68
[n] J. T. Maniscalco, P. N. Koufalis, and M. Liepe, “Modeling of the Frequency and Field Dependence of the Surface Resistance of Impurity-Doped Niobium”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2471-2474. doi:10.18429/JACoW-IPAC2018-WEPMF046
[n] Y. Dutheil, M. Bai, and D. Sagan, “An MDM Spin Transparent Quadrupole for Storage Ring Based EDM Search”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2264-2266. doi:10.18429/JACoW-IPAC2017-TUPVA081
[n] C. Biino et al., “The Influence of Radiation Damage on the Deflection of High Energy Beams in Bent Silicon Crystals”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP014G, pp. 2385-2387.
[n] K. S. White, “Closing Session Comments from the Program Chair”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPB02, pp. 743-743.
[n] K. Elsener et al., “High Efficiency Beam Deflection by Planar Channeling in Bent Silicon Crystals”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1363-1366.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Mishra et al., “Status of ECR Plasma Electron-Ion Numerical Modelling at INFN - From Space-Resolved Population Kinetics to X-Ray Emissivity Analysis”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRT8AUCO26, unpublished.
- C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 252-254.
- G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
- G. Goin, J. Briaud, and L. Le Polotec, “Status Report on the CNRS Orleans' Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-12, pp. 129-132.
- D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
- R. C. York and C. Reece, “RF Steering in the CEBAF CW Superconducting Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1307-1310.
- K. Elsener et al., “Defection of High Energy Beams by Channeling in Bent Silicon Crystals”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2385-2388.
- G. Gaitan et al., “Development of a System for Coating SRF Cavities Using Remote Plasma CVD”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 129.
- C. R. Hoffmann, “Extraction System Model Experiments for the Chalk River Superconducting Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-32, pp. 497-499.
- G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
- G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
- J. Wu, D. Wang, and F. Zhou, “Coherent Synchrotron Radiation Effects in the Electron Cooler for RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG026, pp. 3228-3230.
- B. Kaizer, I. Fishman, and I. G. Gertz, “High Power Amplifier Systems for SARAF Phase II”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB092, pp. 675-677.
- S. Teixeira Lopez et al., “A Seamless Quarter-wave Resonator for HIE-ISOLDE”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 686-691.
- T. Overton, B. Higuera Gonzalez, G. Xia, T. Pacey, and Y. Saveliev, “Quadrupole field instability in cylindrical dielectric wakefield accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR10, pp. 478-481.
- W. Venturini Delsolaro and A. Miyazaki, “Seamless Quarter Wave Resonators for HIE ISOLDE”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 292-296.
- M. Veronese et al., “A Nanofabricated Wirescanner: Design, Fabrication and Experimental Results”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 314-317.
- E. Karantzoulis, J. Miertusova, F. Pradal, L. Tosi, G. Tromba, and A. Vascotto, “Gas Injection Experiment during ELETTRA Operation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP25, pp. 2316-2318.
- F. Bouly, M. Di Giacomo, J. F. Leyge, and M. Tontayeva, “Superconducting Cavity and RF Control Loop Model for the SPIRAL2 Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 767-770.
- C. Pagani et al., “A High-Current Superconducting Proton Linac for an Accelerator-Driven Transmutation System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W037, pp. 1126-1128.
- P. Denham, A. Fisher, P. Musumeci, and R. England, “Ultrafast electron diffraction with adjustable camera length at high energies”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR27, unpublished.
- K. Halbach et al., “A Permanent Magnet Undulator for SPEAR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3136-3139.
- C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
- S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 421-424.
- J. T. Maniscalco, P. N. Koufalis, and M. Liepe, “Modeling of the Frequency and Field Dependence of the Surface Resistance of Impurity-Doped Niobium”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2471-2474.
- Y. Dutheil, M. Bai, and D. Sagan, “An MDM Spin Transparent Quadrupole for Storage Ring Based EDM Search”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2264-2266.
- C. Biino et al., “The Influence of Radiation Damage on the Deflection of High Energy Beams in Bent Silicon Crystals”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP014G, pp. 2385-2387.
- K. S. White, “Closing Session Comments from the Program Chair”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOPB02, pp. 743-743.
- K. Elsener et al., “High Efficiency Beam Deflection by Planar Channeling in Bent Silicon Crystals”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1363-1366.
Back to search