Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. He et al., “Defects characterization of superconducting RF cavities via replica technology”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB071, unpublished.
[n] Y. Luo et al., “Development and progress of the high-power solid-state amplifiers for HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3599-3601. doi:10.18429/JACoW-IPAC2023-WEPM014
[n] N. Aftab et al., “4D Transverse Phase Space characterization of high brightness electron beams at PITZ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4605-4608. doi:10.18429/JACoW-IPAC2023-THPL074
[n] E. F. Higgins and C. Moore, “Longitudinal Beam Signal Processing for the Fermilab Beam Quality Monitor”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2240-2243.
[n] E. F. Higgins, “A Broadrange Beam Signal Limiter for the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3373-3376.
[n] E. F. Higgins and T. H. Nicol, “Beam Detector Assembly for the Fermilab Energy Doubler”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3426-3430.
[n] J. A. Dinkel and A. R. Donaldson, “Precision Current Transductor for the Fermilab Booster Magnet Power Supply”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1234-1238.
[n] L. W. Lai, F. Z. Chen, Y. B. Leng, Y. B. Yan, N. Zhang, and J. Chen, “Design and Performance of Digital BPM Processor for DCLS and SXFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 338-340. doi:10.18429/JACoW-IPAC2017-MOPAB092
[n] D. L. Rubin, R. E. Meller, and J. P. Shanks, “Low Emittance Tuning With a Witness Bunch”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1223-1226. doi:10.18429/JACoW-IPAC2015-MOPWI030
[n] A. G. Kobets et al., “LEPTA Project: Towards Positronium”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB005, pp. 316-318.
[n] R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
[n] Y. B. Yan, Z. C. Chen, L. W. Lai, and Y. B. Leng, “Parameters Tracking and Fault Diagnosis base on NoSQL Database at SSRF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 873-875. doi:10.18429/JACoW-ICALEPCS2015-WEPGF072
[n] R. D?Âlling, “Progress with Bunch-shape Measurements at PSI's High-power Cyclotrons and Proton Beam Lines”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP253, pp. 187-191.
[n] J. H. Martin, J. A. Dinkel, L. A. Klaisner, and H. Varga, “Manipulation of the ZGS Beam for Targeting”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 969-973.
[n] Y. Wang, R. Amin, J. Hoffmann, P. Jines, and D. Launey, “Improve the injection with high energy for CAMD light source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1317-1319. doi:10.18429/JACoW-IPAC2024-TUPG39
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2418-2420. doi:10.18429/JACoW-IPAC2017-TUPVA136
[n] R. D?Âlling, N. Hayashi, and V. E. Scarpine, “Qinclosing Plenary Summary of Working Group E:Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper FRO1B02, pp. 625-626.
[n] E. F. Higgins, “A 53 MHz Randomly Triggered Synchronous Predetermined Scaler for Accelerator Diagnostics”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1578-1581.
[n] S. S. Cao, J. Chen, L. W. Lai, Y. B. Leng, and N. Zhang, “Beam Arrival Time Analisis Based on CBPM at DCLS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4023-4025. doi:10.18429/JACoW-IPAC2017-THPAB128
[n] J. Chen, L. W. Lai, Y. B. Yan, L. Y. Yu, R. X. Yuan, and Y. B. Leng, “Cavity BPM System for DCLS”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 661-664. doi:10.18429/JACoW-IBIC2016-WEPG18
[n] A. G. Kobets et al., “Lepta - the Facility for Fundamental and Applied Research”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRXAUD02, pp. 179-181.
[n] P. Zhang et al., “Commissioning of the RF System for High Energy Photon Source”, presented at the IPAC'26, Deauville, France, May 2026, paper MOO7M01, unpublished.
[n] J. Serrano, P. Alvarez, M. M. Lipinski, and T. Wlostowski, “Accelerator Timing Systems Overview”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOAN1, pp. 1376-1380.
[n] J. P. Shanks and D. L. Rubin, “CESR Upgrade as a High-Energy, High-Brightness X-Ray Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1884-1887. doi:10.18429/JACoW-IPAC2015-TUPMA022
[n] A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1007-1011. doi:10.18429/JACoW-ICALEPCS2017-TUSH303
[n] E. L. Hubbard, “Bevatron Injector Linac II”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 7-02, pp. 240-247.
[n] J. M. Mosthaf, T. Fleck, S. Hanke, A. Peters, S. Scheloske, and S. Vollmer, “Overview of the Communication Structure of the HIT Accelerator Control System”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP002, pp. 168-170.
[n] E. F. Higgins, “Electronics for Damping Transverse Instabilities for the Fermilab Booster Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1830-1833.
[n] A. V. Smirnov et al., “Booster Electron Cooling System of NICA Project”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB028, pp. 230-232.
[n] S. Wang, D. L. Rubin, and J. P. Shanks, “CESR Lattice for Two Beam Operations with Narrow Gap Undulators at CHESS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2968-2971. doi:10.18429/JACoW-IPAC2016-WEPOW053
[n] J. Hoffmann, A. S. Jaroshevich, D. Orlov, A. S. Terekhov, A. Wolf, and C. Krantz, “An Ultracold Cryogenic Photoelectron Source for the TSR Electron Target”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP03, pp. XX-XX.
[n] U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1257-1260.
[n] E. L. Hubbard, W. B. Hanson, and U. Patel, “Vacuum System for the NAL Booster Synchrotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 654-656.
[n] T. Gingold, G. Daniluk, M. Rizzi, J. Serrano, and T. W, “HydRA: A System-on-Chip to Run Software in Radiation-Exposed Areas”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 217-221. doi:10.18429/JACoW-ICALEPCS2023-MO4AO02
[n] M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
[n] J. A. Dinkel, R. E. Daniels, S. K. Das, J. H. Martin, J. R. Simanton, and L. C. Teng, “ZGS Feedback System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 27-31.
[n] I. N. Meshkov et al., “Project of Electron Cooler for NICA”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUXAUD02, pp. 82-84.
[n] G. Daniluk et al., “Solving Vendor Lock-in in VME Single Board Computers through Open-sourcing of the PCIe-VME64x Bridge”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 131-136. doi:10.18429/JACoW-ICALEPCS2017-TUAPL03
[n] J. A. Dinkel, L. A. Klaisner, and G. S. Tool, “NAL Booster and Storage-Ring RF Systems”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 510-516.
[n] E. R. Gray et al., “Longitudinal Beam Motion in the Fermilab Booster Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1897-1900.
[n] S. C. Chiu, E. L. Hubbard, and D. E. Newman, “Study of the Dynamics of an Intense Beam Through an Achromatic Bend”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1138-1141.
[n] X. Wang, J. Chen, S. Huang, X. Ouyang, X. Wu, and Y. Zong, “Development of a TE-mode sample host cavity”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2795-2797. doi:10.18429/JACoW-IPAC2024-WEPS45
[n] P. Zhang et al., “The 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 454-458. doi:10.18429/JACoW-SRF2017-TUPB034
[n] W. F. Bergan, I. V. Bazarov, C. J. Duncan, D. L. Rubin, D. Liarte, and J. P. Sethna, “Use of Dimension-Reduction Techniques With Multi-Objective Genetic Algorithms to Improve the Vertical Emittance and Orbit at CESR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1901-1904. doi:10.18429/JACoW-IPAC2018-WEPAF041
[n] S. Zhao et al., “Cavity and cryomodule test stands in SHINE”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS43, unpublished.
[n] J. Chen, S. S. Cao, L. W. Lai, Y. B. Leng, R. X. Yuan, and N. Zhang, “Beam Charge Measurement Using the Method of Double-Cavity Mixing”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 411-414. doi:10.18429/JACoW-IBIC2017-WEPCF01
[n] F. Z. Chen, L. W. Lai, Y. B. Leng, and Y. B. Yan, “Design of A New Type of Beam Charge Monitor Based on Bunch by Bunch DAQ System”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 284-286. doi:10.18429/JACoW-IBIC2017-TUPWC03
[n] R. D?Âlling, “Variants of Grounding and Shielding in a Beam Diagnostics Measurement of Low Signal Currents”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT010, pp. 174-176.
[n] Y. Yu et al., “T-Mapping diagnostic system for vertical test of SHINE superconducting cavity”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2782-2784. doi:10.18429/JACoW-IPAC2024-WEPS40
[n] L. W. Lai et al., “The Application of Direct RF Sampling System on Cavity BPM Signal Processing”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 278-280. doi:10.18429/JACoW-IBIC2017-TUPWC01
[n] E. F. Higgins, “Beam Signal Processing for the Fermilab Longitundinal and Transverse Beam Damping Systems”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1581-1586.
[n] P. Zhang, H. X. Hao, Z. Q. Li, and X. Y. Zhang, “Frequency Pre-tuning of the 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 459-462. doi:10.18429/JACoW-SRF2017-TUPB035
[n] M. S. Antony et al., “The Strasbourg Superconducting Coil Cyclotron Project”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-02, pp. 217-220.
[n] R. Shankar, A. Piccoli, and P. Lenisa, “Optimization of spin coherence time for electric dipole moment (EDM) measurements in a storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2395-2398. doi:10.18429/JACoW-IPAC2023-TUPM083
[n] U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1132-1135.
[n] R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 334-337. doi:10.18429/JACoW-HB2018-WEP2PO032
[n] L. W. Lai et al., “The Development and Applications of the Digital BPM Signal Processor at SINAP”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 43-45. doi:10.18429/JACoW-FLS2018-TUP1WD03
[n] J. Chen et al., “Design, construction and operation of a surface-treatment platform for SHINE superconducting cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2785-2787. doi:10.18429/JACoW-IPAC2024-WEPS41
[n] X. Y. Zhang, H. X. Hao, Z. Q. Li, H. Y. Lin, Y. Sun, and P. Zhang, “A 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF: Mechanical Design and Fabrication”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 466-470. doi:10.18429/JACoW-SRF2017-TUPB037
[n] X. Zhang et al., “Development and operation of 166.6 MHz SRF modules at HEPS”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7632, unpublished.
[n] R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
[n] E. R. Gray et al., “Transverse Beam Motion in the Fermilab Booster Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1900-1904.
[n] Z. Liu, H. Deng, Z. Jiang, X. Li, H. Qian, and G. Shu, “The correction of beam trajectory for low energy injector”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS026, unpublished.
[n] R. D?Âlling and M. Rohrer, “A 4D Emittance Measurement Device for the 870 keV HIPA Injection Line”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 329-333. doi:10.18429/JACoW-HB2018-WEP2PO030
[n] K. G. Meisner, J. E. Griffin, E. F. Higgins, and S. P. Jachim, “A New Low Level RF System for the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4061-4063.
[n] R. D?Âlling, R. Dressler, and L. Calabretta, “A Test of Stripper Foil Lifetime in PSI's 72 MeV Proton Beam”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 338-341. doi:10.18429/JACoW-HB2018-WEP2PO033
[n] K. R. Bourkland and J. A. Dinkel, “Bipolar Operation of the Main Ring Magnet Supplies”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4063-4066.
[n] E. L. Hubbard, R. E. Peters, and A. G. Ruggiero, “Correction of Intensity-Dependent Beam Loss in the NAL Booster Synchrotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 863-866.
[n] J. P. Sikora et al., “Electron Cloud Density Measurements using Resonant TE Waves at CesrTA”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB49, pp. 471-473.
[n] H. X. Hao, Z. Q. Li, F. Meng, P. Zhang, and X. Y. Zhang, “HOM damping with an enlarged beam tube for HEPS 166.6 MHz SC cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 389-392. doi:10.18429/JACoW-SRF2017-TUPB004
[n] R. D?Âlling, “Bunch-Shape Measurements at PSI's High-power Cyclotrons and Proton Beam Lines”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU3PB01, pp. 257-261.
[n] M. Schwickert, T. Fleck, and A. Reiter, “Monolithic DAQ System for Beam Diagnostics at the HIT Medical Accelerator Facility”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP005, pp. 177-179.
[n] G. Daniluk, C. Gentsos, E. Gousiou, L. Patnaik, and M. Rizzi, “Low-Cost Modular Platform for Custom Electronics in Radiation-Exposed and Radiation-Free Areas at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 672. doi:10.18429/JACoW-ICALEPCS2019-TUAPP03
[n] E. F. Higgins, “Booster and Main Accelerator Phase Detector System for Cavity Tuning”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 570-573.
[n] C. C. Jensen and J. A. Dinkel, “Fermilab Main Injector Abort Kicker System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA07, pp. 1239-1241.
[n] Q. X. Chen, J. F. Chen, J. Rong, S. Xing, and Y. Zong, “Nb₃Sn Vapor Diffusion Coating System at SARI: Design, Construction, and Commissioning”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 655-657. doi:10.18429/JACoW-SRF2023-WEPWB043
[n] S. Ye et al., “Efficient Slice Energy Spread Measurement Using Two Screens”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6617, unpublished.
[n] A. Piccoli, P. Lenisa, and R. Shankar, “Development of the spin tune model for EDM investigations at storage rings”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4083, unpublished.
[n] J. Chen et al., “Cryomodules development for SHINE project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2788-2790. doi:10.18429/JACoW-IPAC2024-WEPS42
[n] R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49.
[n] H. G. Andresen et al., “Picosecond Polarized Electron Bunches from GaAsP Photocathode”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP055L, pp. 1505-1507.
[n] S. J. Levenson et al., “A Path-Length Stability Experiment for Optical Stochastic Cooling at the Cornell Electron Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2311-2314. doi:10.18429/JACoW-IPAC2022-WEPOMS030
[n] C. Yu et al., “Mass Production and Installation of Undulators for SHINE”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7737, unpublished.
[n] Y. Zong, D. Wang, J. Wu, J. Chen, S. Xing, and Z. Wang, “Devices and preparation methods for niobium coupon samples used to investigate high-Q mechanism”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2791-2794. doi:10.18429/JACoW-IPAC2024-WEPS44
[n] E. V. Ahmanova et al., “LEPTA - the Facility for Fundamental and Applied Research”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA23, pp. 83-84.
[n] A. A. Mikhailichenko and D. L. Rubin, “Latest Results on Fast Kicker for g-2 E-989 Experiment at Fermilab”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4616-4618. doi:10.18429/JACoW-IPAC2017-THPVA073
[n] L. Lu, T. Hattori, and N. Hayashizaki, “Design and Simulation of C6+ Hybrid Single Cavity Linac for Cancer Therapy”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD045, pp. 786-788.
[n] P. Horodek et al., “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC044, pp. 532-534.
[n] J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and N. Zhang, “Development of the Simulation Software Package for the CBPM System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 349-351. doi:10.18429/JACoW-IPAC2017-MOPAB095
[n] A. A. Sidorin et al., “Project of Electron Cooler for NICA Collider”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA24, pp. 85-87.
For LaTeX
Use Complete Form
For BibTeX
References
- X. He et al., “Defects characterization of superconducting RF cavities via replica technology”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB071, unpublished.
- Y. Luo et al., “Development and progress of the high-power solid-state amplifiers for HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM014, pp. 3599-3601.
- N. Aftab et al., “4D Transverse Phase Space characterization of high brightness electron beams at PITZ”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL074, pp. 4605-4608.
- E. F. Higgins and C. Moore, “Longitudinal Beam Signal Processing for the Fermilab Beam Quality Monitor”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2240-2243.
- E. F. Higgins, “A Broadrange Beam Signal Limiter for the Fermilab Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3373-3376.
- E. F. Higgins and T. H. Nicol, “Beam Detector Assembly for the Fermilab Energy Doubler”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3426-3430.
- J. A. Dinkel and A. R. Donaldson, “Precision Current Transductor for the Fermilab Booster Magnet Power Supply”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1234-1238.
- L. W. Lai, F. Z. Chen, Y. B. Leng, Y. B. Yan, N. Zhang, and J. Chen, “Design and Performance of Digital BPM Processor for DCLS and SXFEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 338-340.
- D. L. Rubin, R. E. Meller, and J. P. Shanks, “Low Emittance Tuning With a Witness Bunch”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1223-1226.
- A. G. Kobets et al., “LEPTA Project: Towards Positronium”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB005, pp. 316-318.
- R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
- Y. B. Yan, Z. C. Chen, L. W. Lai, and Y. B. Leng, “Parameters Tracking and Fault Diagnosis base on NoSQL Database at SSRF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 873-875.
- R. D?Âlling, “Progress with Bunch-shape Measurements at PSI's High-power Cyclotrons and Proton Beam Lines”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP253, pp. 187-191.
- J. H. Martin, J. A. Dinkel, L. A. Klaisner, and H. Varga, “Manipulation of the ZGS Beam for Targeting”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 969-973.
- Y. Wang, R. Amin, J. Hoffmann, P. Jines, and D. Launey, “Improve the injection with high energy for CAMD light source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG39, pp. 1317-1319.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2418-2420.
- R. D?Âlling, N. Hayashi, and V. E. Scarpine, “Qinclosing Plenary Summary of Working Group E:Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper FRO1B02, pp. 625-626.
- E. F. Higgins, “A 53 MHz Randomly Triggered Synchronous Predetermined Scaler for Accelerator Diagnostics”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1578-1581.
- S. S. Cao, J. Chen, L. W. Lai, Y. B. Leng, and N. Zhang, “Beam Arrival Time Analisis Based on CBPM at DCLS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4023-4025.
- J. Chen, L. W. Lai, Y. B. Yan, L. Y. Yu, R. X. Yuan, and Y. B. Leng, “Cavity BPM System for DCLS”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 661-664.
- A. G. Kobets et al., “Lepta - the Facility for Fundamental and Applied Research”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper FRXAUD02, pp. 179-181.
- P. Zhang et al., “Commissioning of the RF System for High Energy Photon Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOO7M01, this conference.
- J. Serrano, P. Alvarez, M. M. Lipinski, and T. Wlostowski, “Accelerator Timing Systems Overview”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOAN1, pp. 1376-1380.
- J. P. Shanks and D. L. Rubin, “CESR Upgrade as a High-Energy, High-Brightness X-Ray Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1884-1887.
- A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1007-1011.
- E. L. Hubbard, “Bevatron Injector Linac II”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 7-02, pp. 240-247.
- J. M. Mosthaf, T. Fleck, S. Hanke, A. Peters, S. Scheloske, and S. Vollmer, “Overview of the Communication Structure of the HIT Accelerator Control System”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP002, pp. 168-170.
- E. F. Higgins, “Electronics for Damping Transverse Instabilities for the Fermilab Booster Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1830-1833.
- A. V. Smirnov et al., “Booster Electron Cooling System of NICA Project”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB028, pp. 230-232.
- S. Wang, D. L. Rubin, and J. P. Shanks, “CESR Lattice for Two Beam Operations with Narrow Gap Undulators at CHESS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2968-2971.
- J. Hoffmann, A. S. Jaroshevich, D. Orlov, A. S. Terekhov, A. Wolf, and C. Krantz, “An Ultracold Cryogenic Photoelectron Source for the TSR Electron Target”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP03, pp. XX-XX.
- U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1257-1260.
- E. L. Hubbard, W. B. Hanson, and U. Patel, “Vacuum System for the NAL Booster Synchrotron”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 654-656.
- T. Gingold, G. Daniluk, M. Rizzi, J. Serrano, and T. W, “HydRA: A System-on-Chip to Run Software in Radiation-Exposed Areas”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4AO02, pp. 217-221.
- M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
- J. A. Dinkel, R. E. Daniels, S. K. Das, J. H. Martin, J. R. Simanton, and L. C. Teng, “ZGS Feedback System”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 27-31.
- I. N. Meshkov et al., “Project of Electron Cooler for NICA”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper TUXAUD02, pp. 82-84.
- G. Daniluk et al., “Solving Vendor Lock-in in VME Single Board Computers through Open-sourcing of the PCIe-VME64x Bridge”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 131-136.
- J. A. Dinkel, L. A. Klaisner, and G. S. Tool, “NAL Booster and Storage-Ring RF Systems”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 510-516.
- E. R. Gray et al., “Longitudinal Beam Motion in the Fermilab Booster Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1897-1900.
- S. C. Chiu, E. L. Hubbard, and D. E. Newman, “Study of the Dynamics of an Intense Beam Through an Achromatic Bend”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1138-1141.
- X. Wang, J. Chen, S. Huang, X. Ouyang, X. Wu, and Y. Zong, “Development of a TE-mode sample host cavity”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS45, pp. 2795-2797.
- P. Zhang et al., “The 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 454-458.
- W. F. Bergan, I. V. Bazarov, C. J. Duncan, D. L. Rubin, D. Liarte, and J. P. Sethna, “Use of Dimension-Reduction Techniques With Multi-Objective Genetic Algorithms to Improve the Vertical Emittance and Orbit at CESR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1901-1904.
- S. Zhao et al., “Cavity and cryomodule test stands in SHINE”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS43, unpublished.
- J. Chen, S. S. Cao, L. W. Lai, Y. B. Leng, R. X. Yuan, and N. Zhang, “Beam Charge Measurement Using the Method of Double-Cavity Mixing”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 411-414.
- F. Z. Chen, L. W. Lai, Y. B. Leng, and Y. B. Yan, “Design of A New Type of Beam Charge Monitor Based on Bunch by Bunch DAQ System”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 284-286.
- R. D?Âlling, “Variants of Grounding and Shielding in a Beam Diagnostics Measurement of Low Signal Currents”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT010, pp. 174-176.
- Y. Yu et al., “T-Mapping diagnostic system for vertical test of SHINE superconducting cavity”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS40, pp. 2782-2784.
- L. W. Lai et al., “The Application of Direct RF Sampling System on Cavity BPM Signal Processing”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 278-280.
- E. F. Higgins, “Beam Signal Processing for the Fermilab Longitundinal and Transverse Beam Damping Systems”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1581-1586.
- P. Zhang, H. X. Hao, Z. Q. Li, and X. Y. Zhang, “Frequency Pre-tuning of the 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 459-462.
- M. S. Antony et al., “The Strasbourg Superconducting Coil Cyclotron Project”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CP-02, pp. 217-220.
- R. Shankar, A. Piccoli, and P. Lenisa, “Optimization of spin coherence time for electric dipole moment (EDM) measurements in a storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM083, pp. 2395-2398.
- U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1132-1135.
- R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 334-337.
- L. W. Lai et al., “The Development and Applications of the Digital BPM Signal Processor at SINAP”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 43-45.
- J. Chen et al., “Design, construction and operation of a surface-treatment platform for SHINE superconducting cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS41, pp. 2785-2787.
- X. Y. Zhang, H. X. Hao, Z. Q. Li, H. Y. Lin, Y. Sun, and P. Zhang, “A 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF: Mechanical Design and Fabrication”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 466-470.
- X. Zhang et al., “Development and operation of 166.6 MHz SRF modules at HEPS”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7632, this conference.
- R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
- E. R. Gray et al., “Transverse Beam Motion in the Fermilab Booster Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1900-1904.
- Z. Liu, H. Deng, Z. Jiang, X. Li, H. Qian, and G. Shu, “The correction of beam trajectory for low energy injector”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS026, unpublished.
- R. D?Âlling and M. Rohrer, “A 4D Emittance Measurement Device for the 870 keV HIPA Injection Line”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 329-333.
- K. G. Meisner, J. E. Griffin, E. F. Higgins, and S. P. Jachim, “A New Low Level RF System for the Fermilab Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4061-4063.
- R. D?Âlling, R. Dressler, and L. Calabretta, “A Test of Stripper Foil Lifetime in PSI's 72 MeV Proton Beam”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 338-341.
- K. R. Bourkland and J. A. Dinkel, “Bipolar Operation of the Main Ring Magnet Supplies”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4063-4066.
- E. L. Hubbard, R. E. Peters, and A. G. Ruggiero, “Correction of Intensity-Dependent Beam Loss in the NAL Booster Synchrotron”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 863-866.
- J. P. Sikora et al., “Electron Cloud Density Measurements using Resonant TE Waves at CesrTA”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB49, pp. 471-473.
- H. X. Hao, Z. Q. Li, F. Meng, P. Zhang, and X. Y. Zhang, “HOM damping with an enlarged beam tube for HEPS 166.6 MHz SC cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 389-392.
- R. D?Âlling, “Bunch-Shape Measurements at PSI's High-power Cyclotrons and Proton Beam Lines”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU3PB01, pp. 257-261.
- M. Schwickert, T. Fleck, and A. Reiter, “Monolithic DAQ System for Beam Diagnostics at the HIT Medical Accelerator Facility”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP005, pp. 177-179.
- G. Daniluk, C. Gentsos, E. Gousiou, L. Patnaik, and M. Rizzi, “Low-Cost Modular Platform for Custom Electronics in Radiation-Exposed and Radiation-Free Areas at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 672.
- E. F. Higgins, “Booster and Main Accelerator Phase Detector System for Cavity Tuning”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 570-573.
- C. C. Jensen and J. A. Dinkel, “Fermilab Main Injector Abort Kicker System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA07, pp. 1239-1241.
- Q. X. Chen, J. F. Chen, J. Rong, S. Xing, and Y. Zong, “Nb₃Sn Vapor Diffusion Coating System at SARI: Design, Construction, and Commissioning”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB043, pp. 655-657.
- S. Ye et al., “Efficient Slice Energy Spread Measurement Using Two Screens”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6617, this conference.
- A. Piccoli, P. Lenisa, and R. Shankar, “Development of the spin tune model for EDM investigations at storage rings”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4083, this conference.
- J. Chen et al., “Cryomodules development for SHINE project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS42, pp. 2788-2790.
- R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49.
- H. G. Andresen et al., “Picosecond Polarized Electron Bunches from GaAsP Photocathode”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP055L, pp. 1505-1507.
- S. J. Levenson et al., “A Path-Length Stability Experiment for Optical Stochastic Cooling at the Cornell Electron Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2311-2314.
- C. Yu et al., “Mass Production and Installation of Undulators for SHINE”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7737, this conference.
- Y. Zong, D. Wang, J. Wu, J. Chen, S. Xing, and Z. Wang, “Devices and preparation methods for niobium coupon samples used to investigate high-Q mechanism”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS44, pp. 2791-2794.
- E. V. Ahmanova et al., “LEPTA - the Facility for Fundamental and Applied Research”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA23, pp. 83-84.
- A. A. Mikhailichenko and D. L. Rubin, “Latest Results on Fast Kicker for g-2 E-989 Experiment at Fermilab”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4616-4618.
- L. Lu, T. Hattori, and N. Hayashizaki, “Design and Simulation of C6+ Hybrid Single Cavity Linac for Cancer Therapy”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD045, pp. 786-788.
- P. Horodek et al., “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC044, pp. 532-534.
- J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and N. Zhang, “Development of the Simulation Software Package for the CBPM System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 349-351.
- A. A. Sidorin et al., “Project of Electron Cooler for NICA Collider”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA24, pp. 85-87.
Back to search