Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
[n] T. Kramer et al., “Studies of Beam Losses from Failures of SPS Beam Dump Kickers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN097, pp. 1607-1609.
[n] R. B. Palmer et al., “High-Energy High-Luminosity μ+ μ- Collider Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MXG03, pp. 53-57.
[n] A. Rai et al., “Completion of the Superconducting Heavy Ion Linac at Inter-University Accelerator Centre”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP012, pp. 103-105.
[n] I. L. Sheynman, A. Altmark, S. Baturin, and A. Kanareykin, “The Analysis of Tunable Dielectric Loaded Wakefield Accelerating Structure of Rectangular Geometry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD057, pp. 4413-4415.
[n] R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
[n] A. D. McInturff et al., “The Fermilab Collider DOslash Low /beta System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1264-1267.
[n] P. Pipersky et al., “First Undulators for the Advanced Light Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1572-1575.
[n] L. Tkachenko et al., “Development of HED@FAIR Quadrupole”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 78-80. doi:10.18429/JACoW-RUPAC2018-WECBMH03
[n] W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2296-2299. doi:10.18429/JACoW-IPAC2019-WEZZPLS3
[n] X. Zhou and S. Zhong, “Phasing System for the Injector of Beijing Electron Positron Collider (BEPC)”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 800-802.
[n] L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3848-3851. doi:10.18429/JACoW-IPAC2018-THPAL084
[n] E. J. Lee, M. G. Hur, and Y. B. Kong, “Test Production of Ti-44 using RFT-30 Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 108-109. doi:10.18429/JACoW-Cyclotrons2016-MOP21
[n] C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 307-310. doi:10.18429/JACoW-ICALEPCS2017-TUMPL04
[n] I. S. Park et al., “Fabrication of ICHIRO Nine-cell Cavities in PAL for STF of KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN060, pp. 2173-2175.
[n] P. N. Prakash, D. Kanjilal, K. K. MISTRI, A. Roy, S. S. K. Sonti, and J. Zacharias, “Superconducting Niobium Resonator Fabrication And Testing At IUAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA132, pp. 500-502.
[n] L. Buchmann et al., “An Intense Optically Pumped H
[n] P. Celliers et al., “Proposed New Facilities for Proton Therapy at iThemba LABS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI085, pp. 560-562.
[n] S. Di Mitri and S. Ferry, “Optics Design and Collimation Efficiency of the FERMI@elettra Collimation System”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB40, pp. 483-485.
[n] S. Di Mitri, M. Bossi, D. Castronovo, I. Cudin, M. Ferianis, and L. Froehlich, “Electron Beam Collimation for Slice Diagnostics and Generation of Femtosecond Soft X-Ray Pulses from a Free Electron Laser”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC04, pp. 49-52.
[n] D. Engwall et al., “A High-DC-Voltage GaAs Photoemission Gun: Transverse Emittance and Momentum Spread Measurements”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C012, pp. 2693-2695.
[n] W. Busse et al., “Can We Make a Control System Do What the Operator Wants?”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-01, pp. 548-554.
[n] W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
[n] D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-15, pp. 646-649.
[n] D. T. Palmer et al., “ORION: An Advanced Accelerator Facility at SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH068, pp. 2251-2253.
[n] J. Broere, H. Kugler, M. Vretenar, U. Ratzinger, and B. Krietenstein, “High Power Conditioning of the 202 MHz IH Tank 2 at the CERN Linac3”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4004, pp. 771-773.
[n] G. Stinson and P. Bricault, “A Proposal for an Additional Beamline to the TRIUMF ISAC Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB024, pp. 1670-1672.
[n] S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
[n] J. L. Conradie et al., “New Priorities and Developments at NAC”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-05, pp. XX-XX.
[n] S. Rauch et al., “Facility-Wide Synchronization of Standard FAIR Equipment Controllers”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD48, pp. 84-86.
[n] S. Kazakov et al., “Main Couplers for Project X”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC050, pp. 2324-2326.
[n] S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
[n] I. J. Kim, S. M. Choi, M. G. Hur, S. W. Kim, J. H. Park, and S. D. Yang, “The Solid Target Control System for the RFT-30 30 MeV Cyclotron in KAERI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA071, pp. 241-243.
[n] J. T. Volk et al., “Correction Magnets for the Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB072, pp. 1766-1768.
[n] P. Craievich et al., “A Low-Energy RF Deflector for the FERMI@Elettra Project”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB43, pp. 493-496.
[n] N. Lecesne et al., “SHyPIE: A New Source for On Line Production of Multicharged Radioactive Condensable Ion Beams”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-08, pp. 362-365.
[n] H. Braun, J. Clendenin, S. Ecklund, A. Kulikov, and R. Pitthan, “A Possible Design of the NLC e Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 530-533.
[n] J. A. Clarke et al., “Status of the UK Superconducting Planar Undulator Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA062, pp. 2259-2261.
[n] P. A. Smith et al., “Rf Measurement and Characterisation of European Spallation Source Cavities at UKRI-STFC Daresbury Laboratory and DESY”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 212-214. doi:10.18429/JACoW-LINAC2022-MOPOGE25
[n] J. H. Suh et al., “Performance of the PLS High Precision Magnet Power Supplies”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU480, pp. 503-505.
[n] Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
[n] R. L. Poirier and T. Enegren, “Status of RF Development Work on a Ferrite Tuned Amplifier Cavity for the TRIUMF Kaon Factory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1499-1502.
[n] C. Jamet, W. LC. Le Coz, G. Ledu, S. Loret, and C. Potier de courcy, “Energy and Longitudinal Bunch Measurements at the SPIRAL2 RFQ Exit”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 723-727. doi:10.18429/JACoW-IBIC2016-WEPG42
For LaTeX
Use Complete Form
For BibTeX
References
- N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
- T. Kramer et al., “Studies of Beam Losses from Failures of SPS Beam Dump Kickers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN097, pp. 1607-1609.
- R. B. Palmer et al., “High-Energy High-Luminosity μ+ μ- Collider Design”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MXG03, pp. 53-57.
- A. Rai et al., “Completion of the Superconducting Heavy Ion Linac at Inter-University Accelerator Centre”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP012, pp. 103-105.
- I. L. Sheynman, A. Altmark, S. Baturin, and A. Kanareykin, “The Analysis of Tunable Dielectric Loaded Wakefield Accelerating Structure of Rectangular Geometry”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD057, pp. 4413-4415.
- R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
- A. D. McInturff et al., “The Fermilab Collider DOslash Low /beta System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1264-1267.
- P. Pipersky et al., “First Undulators for the Advanced Light Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1572-1575.
- L. Tkachenko et al., “Development of HED@FAIR Quadrupole”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 78-80.
- W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2296-2299.
- X. Zhou and S. Zhong, “Phasing System for the Injector of Beijing Electron Positron Collider (BEPC)”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 800-802.
- L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3848-3851.
- E. J. Lee, M. G. Hur, and Y. B. Kong, “Test Production of Ti-44 using RFT-30 Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 108-109.
- C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 307-310.
- I. S. Park et al., “Fabrication of ICHIRO Nine-cell Cavities in PAL for STF of KEK”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN060, pp. 2173-2175.
- P. N. Prakash, D. Kanjilal, K. K. MISTRI, A. Roy, S. S. K. Sonti, and J. Zacharias, “Superconducting Niobium Resonator Fabrication And Testing At IUAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA132, pp. 500-502.
- L. Buchmann et al., “An Intense Optically Pumped H
- P. Celliers et al., “Proposed New Facilities for Proton Therapy at iThemba LABS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI085, pp. 560-562.
- S. Di Mitri and S. Ferry, “Optics Design and Collimation Efficiency of the FERMI@elettra Collimation System”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB40, pp. 483-485.
- S. Di Mitri, M. Bossi, D. Castronovo, I. Cudin, M. Ferianis, and L. Froehlich, “Electron Beam Collimation for Slice Diagnostics and Generation of Femtosecond Soft X-Ray Pulses from a Free Electron Laser”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC04, pp. 49-52.
- D. Engwall et al., “A High-DC-Voltage GaAs Photoemission Gun: Transverse Emittance and Momentum Spread Measurements”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2C012, pp. 2693-2695.
- W. Busse et al., “Can We Make a Control System Do What the Operator Wants?”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper H-01, pp. 548-554.
- W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
- D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-15, pp. 646-649.
- D. T. Palmer et al., “ORION: An Advanced Accelerator Facility at SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH068, pp. 2251-2253.
- J. Broere, H. Kugler, M. Vretenar, U. Ratzinger, and B. Krietenstein, “High Power Conditioning of the 202 MHz IH Tank 2 at the CERN Linac3”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4004, pp. 771-773.
- G. Stinson and P. Bricault, “A Proposal for an Additional Beamline to the TRIUMF ISAC Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB024, pp. 1670-1672.
- S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
- J. L. Conradie et al., “New Priorities and Developments at NAC”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-05, pp. XX-XX.
- S. Rauch et al., “Facility-Wide Synchronization of Standard FAIR Equipment Controllers”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD48, pp. 84-86.
- S. Kazakov et al., “Main Couplers for Project X”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC050, pp. 2324-2326.
- S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
- I. J. Kim, S. M. Choi, M. G. Hur, S. W. Kim, J. H. Park, and S. D. Yang, “The Solid Target Control System for the RFT-30 30 MeV Cyclotron in KAERI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA071, pp. 241-243.
- J. T. Volk et al., “Correction Magnets for the Fermilab Recycler Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB072, pp. 1766-1768.
- P. Craievich et al., “A Low-Energy RF Deflector for the FERMI@Elettra Project”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB43, pp. 493-496.
- N. Lecesne et al., “SHyPIE: A New Source for On Line Production of Multicharged Radioactive Condensable Ion Beams”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-08, pp. 362-365.
- H. Braun, J. Clendenin, S. Ecklund, A. Kulikov, and R. Pitthan, “A Possible Design of the NLC e Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 530-533.
- J. A. Clarke et al., “Status of the UK Superconducting Planar Undulator Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA062, pp. 2259-2261.
- P. A. Smith et al., “Rf Measurement and Characterisation of European Spallation Source Cavities at UKRI-STFC Daresbury Laboratory and DESY”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 212-214.
- J. H. Suh et al., “Performance of the PLS High Precision Magnet Power Supplies”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU480, pp. 503-505.
- Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
- R. L. Poirier and T. Enegren, “Status of RF Development Work on a Ferrite Tuned Amplifier Cavity for the TRIUMF Kaon Factory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1499-1502.
- C. Jamet, W. LC. Le Coz, G. Ledu, S. Loret, and C. Potier de courcy, “Energy and Longitudinal Bunch Measurements at the SPIRAL2 RFQ Exit”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 723-727.
Back to search