Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Hattori et al., “Study of IH Type Linear Accelerator for Radio-Isotopes Production”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-71, pp. 233-235.
[n] M. K. Craddock, D. I. Kaltchev, and R. V. Servranckx, “Optimization of Collimator Jaw Locations for the LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP109G, pp. 1432-1434.
[n] B. P. Xiao et al., “RF Design of Normal Conducting 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 532-535. doi:10.18429/JACoW-IPAC2016-MOPMY010
[n] J. R. Delayen, C. L. Bohn, W. L. Kennedy, B. J. Micklich, C. T. Roche, and L. Sagalovsky, “Development of High-Current Superconducting Accelerators at Argonne National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93A02, pp. XX-XX.
[n] S. Ikeda, K. Horioka, Y. Fuwa, M. Kumaki, T. Kanesue, and M. Okamura, “Control of Plasma Flux with Pulsed Solenoid for Laser Ion Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 601-603. doi:10.18429/JACoW-IPAC2014-MOPRI011
[n] A. C. Starritt, A. Pozar, and Y. E. Tan, “Orbit Feedback and Beam Stability at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3805-3807. doi:10.18429/JACoW-IPAC2019-THPRB005
[n] I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1927-1930.
[n] K. K. Pant, S. Krishnagopal, and S. Chouksey, “RF Results and Beam Dynamics Simulations of A Prototype S-Band Photocathode Gun”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU445, pp. 419-421.
[n] Y. C. Yu et al., “Study on the Influence of the Range Shifter Material in a Scanning Nozzle for Proton Therapy Based on Monte Carlo Method”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4100-4102. doi:10.18429/JACoW-IPAC2019-THPRB118
[n] I. Sato et al., “Accelerator Guide of Positron Generator Linac”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-26, pp. 499-501.
[n] J. J. Guo et al., “Beam Loss Study for the Implementation of Dechirper at the European XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1670-1673. doi:10.18429/JACoW-IPAC2021-TUPAB119
[n] M. Crescenti, P. Knaus, and S. Rossi, “The RF Cycle of the Pimms Medical Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A02, pp. 2503-2505.
[n] A. A. Mondelli, D. P. Chernin, A. T. Drobot, V. Granatstein, and M. Reiser, “Frequency Scaling of RF Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3157-3160.
[n] G. Dutto et al., “The TRIUMF 500 MeV Cyclotron: Present Operation and Intensity Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE016, pp. 1584-1586.
[n] V. G. Dudnikov et al., “Positive and Negative Ions Radio Frequency Sources with Solenoidal Magnetic Field”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 799-802. doi:10.18429/JACoW-NAPAC2016-WEPOA45
[n] D. J. Harding and A. Riddiford, “Automatic Steering Corrections to Minimize Injection Oscillations in the Fermilab Antiproton Source Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1663-1666.
[n] Y. M. Koo, B. K. Kang, D. E. Kim, and J. E. Milburn, “Magnetic Field measurements of the 2.0 GeV PLS Storage Ring Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2235-2238.
[n] S. Shin, J.-S. Chai, J. C. Lee, and B. N. Lee, “Design Study of a 83.2 MHz RF Cavity for the 9 MeV Compact Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT029, pp. 215-217.
[n] S. Arai, A. Imanishi, T. Morimoto, S. Shibuya, E. Tojyo, and N. Tokuda, “Acceleration Tests of the INS 25.5-MHz Split Coaxial RFQ”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3035-3038.
[n] F. Maimone et al., “Stable and Intense ⁴⁸Ca Ion Beam Production With a Microwave Shielded Oven and an Optical Spectrometer as Diagnostic Tool”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 50-53. doi:10.18429/JACoW-ECRIS2020-MOZZO03
[n] T. Castellano, L. Bartoszek, J. McCarthy, J. Petter, and E. Tilles, “Kickers and Power Supplies for the Fermilab Tevatron I Antiproton Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3003-3006.
[n] D. A. Demikhovsky, V. N. Gres, V. V. Komarov, V. I. Terekhov, E. F. Troyanov, and V. Ya. Uglekov, “The U-70 Machine Continuous Beam Loss Monitoring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04D, pp. 1617-1619.
[n] R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 632-634.
[n] V. Gupta, J. Hussain, and G. Mishra, “Variable Polarized Harmonic Undulator Free Electron Laser and Effect of Beam Energy Spread”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC19, pp. 83-86.
[n] H. Jeevakhan and G. Mishra, “Harmonic Undulator Radiation with Dual Non Periodic Magnetic Components”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 98-102. doi:10.18429/JACoW-FLS2018-WEA2WD04
[n] A. Andrews et al., “EPICS Accelerator Control Systems for Lambda EMS and TCR Magnet Power Supplies”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM14, pp. 664-666.
[n] A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 6-10. doi:10.18429/JACoW-MEDSI2018-TUOPMA04
[n] V. Karasyuk et al., “H Cyclotron for Charge-Exchange Injection into a Synchrotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-13, pp. 86-91.
[n] J. T. Keane and A. J. McNerney, “Experimental Results on the RCA 7835, and Initial Operating Parameters of the FTH 515”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-08, pp. 183-190.
[n] J. van Tilborg et al., “Active stabilization in high-power laser plasma accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR49, unpublished.
[n] J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
[n] M. Mansouri, S. L. Birch, A. Nordt, D. Paulic, Y. K. Sin, and A. Toral Diez, “Accelerator Personnel Safety Systems for European Spallation Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1884-1886. doi:10.18429/JACoW-IPAC2017-TUPIK080
[n] H. Yi et al., “Physical Design for SASE Beamlines of S3FEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL046, unpublished.
[n] J. J. Bisognano, “Superconducting RF and Beam-Cavity Interactions”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87C01, pp. XX-XX.
[n] C. Davut, O. Apsimon, P. Karataev, T. Lef?¿vre, S. Mazzoni, and G. X. Xia, “Analytical and Numerical Characterization of Cherenkov Diffraction Radiation as a Longitudinal Electron Bunch Profile Monitor for AWAKE Run 2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4355-4358. doi:10.18429/JACoW-IPAC2021-THPAB284
[n] K. Nakayoshi, Y. Fujii, and K. Sakashita, “Development of a Voltage Interlock System for Normal-Conducting Magnets in the Neutrino Experimental Facility at J-PARC”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 738-741. doi:10.18429/JACoW-ICALEPCS2021-WEPV037
[n] R. W. Hamm, J. H. Bower, K. R. Crandall, M. E. Hamm, and J. M. Potter, “Commercial Ion Linacs”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1462-1465.
[n] R. Robles et al., “Single spike hard x-ray free-electron laser pulses generated by photocathode laser shaping”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB102, unpublished.
[n] M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Stucture to Improve Software Dependability in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 300. doi:10.18429/JACoW-ICALEPCS2019-MOPHA045
[n] J. M. Peterson and K. L. Brown, “The Sensitivity of the PEP Beam Transport Line to Perbutations”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3496-3499.
[n] R. Bailey et al., “First Two Years Operational Experience with LEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 848-851.
[n] R. L. Ramjiawan, M. Aiba, W. Bartmann, Y. Dutheil, M. Hofer, and P. J. Hunchak, “Concepts and Considerations for FCC-ee Top-Up Injection Strategies”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2106-2109. doi:10.18429/JACoW-IPAC2022-WEPOTK025
[n] D. F. Marcks and R. B. Wehrle, “Secondary Beam Targetry Developments”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 955-960.
[n] W.-Y. Lin, B. Y. Huang, C. Y. Hung, H.-J. Tsai, T.-W. Hsu, and T.-Y. Lee, “TPS booster power supply performance experiment and monitoring program”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3261-3263. doi:10.18429/JACoW-IPAC2024-THPG07
[n] H. G. Worstell, “Design, Development, and Fabrication of Multicavity 805 MHz Accelerator Tanks”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-06, pp. 169-175.
[n] U. Trinks, “The Superconducting Separated Orbit Cyclotron Triton”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-11, pp. XX-XX.
[n] M. Musardo et al., “A New PCB Rotating Coil at NSLS-II”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 816-819. doi:10.18429/JACoW-NAPAC2022-WEPA77
[n] J. Marcos, J. Campmany, A. Fontanet, V. Massana, and L. R. M. Rib??, “Design and Construction of 3D Helmholtz Coil System to Calibrate 3D Hall Probes”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4228-4230. doi:10.18429/JACoW-IPAC2019-THPTS055
[n] R. Mayer and N. Minatti, “Performance of a Superconducting 65-Cell-Structure in X-Band”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3314-3317.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Hattori et al., “Study of IH Type Linear Accelerator for Radio-Isotopes Production”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-71, pp. 233-235.
- M. K. Craddock, D. I. Kaltchev, and R. V. Servranckx, “Optimization of Collimator Jaw Locations for the LHC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP109G, pp. 1432-1434.
- B. P. Xiao et al., “RF Design of Normal Conducting 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 532-535.
- J. R. Delayen, C. L. Bohn, W. L. Kennedy, B. J. Micklich, C. T. Roche, and L. Sagalovsky, “Development of High-Current Superconducting Accelerators at Argonne National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93A02, pp. XX-XX.
- S. Ikeda, K. Horioka, Y. Fuwa, M. Kumaki, T. Kanesue, and M. Okamura, “Control of Plasma Flux with Pulsed Solenoid for Laser Ion Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 601-603.
- A. C. Starritt, A. Pozar, and Y. E. Tan, “Orbit Feedback and Beam Stability at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3805-3807.
- I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1927-1930.
- K. K. Pant, S. Krishnagopal, and S. Chouksey, “RF Results and Beam Dynamics Simulations of A Prototype S-Band Photocathode Gun”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU445, pp. 419-421.
- Y. C. Yu et al., “Study on the Influence of the Range Shifter Material in a Scanning Nozzle for Proton Therapy Based on Monte Carlo Method”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4100-4102.
- I. Sato et al., “Accelerator Guide of Positron Generator Linac”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-26, pp. 499-501.
- J. J. Guo et al., “Beam Loss Study for the Implementation of Dechirper at the European XFEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1670-1673.
- M. Crescenti, P. Knaus, and S. Rossi, “The RF Cycle of the Pimms Medical Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A02, pp. 2503-2505.
- A. A. Mondelli, D. P. Chernin, A. T. Drobot, V. Granatstein, and M. Reiser, “Frequency Scaling of RF Linacs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3157-3160.
- G. Dutto et al., “The TRIUMF 500 MeV Cyclotron: Present Operation and Intensity Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE016, pp. 1584-1586.
- V. G. Dudnikov et al., “Positive and Negative Ions Radio Frequency Sources with Solenoidal Magnetic Field”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 799-802.
- D. J. Harding and A. Riddiford, “Automatic Steering Corrections to Minimize Injection Oscillations in the Fermilab Antiproton Source Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1663-1666.
- Y. M. Koo, B. K. Kang, D. E. Kim, and J. E. Milburn, “Magnetic Field measurements of the 2.0 GeV PLS Storage Ring Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2235-2238.
- S. Shin, J.-S. Chai, J. C. Lee, and B. N. Lee, “Design Study of a 83.2 MHz RF Cavity for the 9 MeV Compact Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT029, pp. 215-217.
- S. Arai, A. Imanishi, T. Morimoto, S. Shibuya, E. Tojyo, and N. Tokuda, “Acceleration Tests of the INS 25.5-MHz Split Coaxial RFQ”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3035-3038.
- F. Maimone et al., “Stable and Intense ⁴⁸Ca Ion Beam Production With a Microwave Shielded Oven and an Optical Spectrometer as Diagnostic Tool”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOZZO03, pp. 50-53.
- T. Castellano, L. Bartoszek, J. McCarthy, J. Petter, and E. Tilles, “Kickers and Power Supplies for the Fermilab Tevatron I Antiproton Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3003-3006.
- D. A. Demikhovsky, V. N. Gres, V. V. Komarov, V. I. Terekhov, E. F. Troyanov, and V. Ya. Uglekov, “The U-70 Machine Continuous Beam Loss Monitoring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP04D, pp. 1617-1619.
- R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 632-634.
- V. Gupta, J. Hussain, and G. Mishra, “Variable Polarized Harmonic Undulator Free Electron Laser and Effect of Beam Energy Spread”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC19, pp. 83-86.
- H. Jeevakhan and G. Mishra, “Harmonic Undulator Radiation with Dual Non Periodic Magnetic Components”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 98-102.
- A. Andrews et al., “EPICS Accelerator Control Systems for Lambda EMS and TCR Magnet Power Supplies”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM14, pp. 664-666.
- A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 6-10.
- V. Karasyuk et al., “H Cyclotron for Charge-Exchange Injection into a Synchrotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-13, pp. 86-91.
- J. T. Keane and A. J. McNerney, “Experimental Results on the RCA 7835, and Initial Operating Parameters of the FTH 515”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-08, pp. 183-190.
- J. van Tilborg et al., “Active stabilization in high-power laser plasma accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR49, unpublished.
- J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
- M. Mansouri, S. L. Birch, A. Nordt, D. Paulic, Y. K. Sin, and A. Toral Diez, “Accelerator Personnel Safety Systems for European Spallation Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1884-1886.
- H. Yi et al., “Physical Design for SASE Beamlines of S3FEL”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL046, unpublished.
- J. J. Bisognano, “Superconducting RF and Beam-Cavity Interactions”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87C01, pp. XX-XX.
- C. Davut, O. Apsimon, P. Karataev, T. Lef?¿vre, S. Mazzoni, and G. X. Xia, “Analytical and Numerical Characterization of Cherenkov Diffraction Radiation as a Longitudinal Electron Bunch Profile Monitor for AWAKE Run 2”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4355-4358.
- K. Nakayoshi, Y. Fujii, and K. Sakashita, “Development of a Voltage Interlock System for Normal-Conducting Magnets in the Neutrino Experimental Facility at J-PARC”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 738-741.
- R. W. Hamm, J. H. Bower, K. R. Crandall, M. E. Hamm, and J. M. Potter, “Commercial Ion Linacs”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1462-1465.
- R. Robles et al., “Single spike hard x-ray free-electron laser pulses generated by photocathode laser shaping”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB102, this conference.
- M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
- Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Stucture to Improve Software Dependability in Collider-Accelerator Control Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 300.
- J. M. Peterson and K. L. Brown, “The Sensitivity of the PEP Beam Transport Line to Perbutations”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3496-3499.
- R. Bailey et al., “First Two Years Operational Experience with LEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 848-851.
- R. L. Ramjiawan, M. Aiba, W. Bartmann, Y. Dutheil, M. Hofer, and P. J. Hunchak, “Concepts and Considerations for FCC-ee Top-Up Injection Strategies”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2106-2109.
- D. F. Marcks and R. B. Wehrle, “Secondary Beam Targetry Developments”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 955-960.
- W.-Y. Lin, B. Y. Huang, C. Y. Hung, H.-J. Tsai, T.-W. Hsu, and T.-Y. Lee, “TPS booster power supply performance experiment and monitoring program”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG07, pp. 3261-3263.
- H. G. Worstell, “Design, Development, and Fabrication of Multicavity 805 MHz Accelerator Tanks”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-06, pp. 169-175.
- U. Trinks, “The Superconducting Separated Orbit Cyclotron Triton”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-11, pp. XX-XX.
- M. Musardo et al., “A New PCB Rotating Coil at NSLS-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 816-819.
- J. Marcos, J. Campmany, A. Fontanet, V. Massana, and L. R. M. Rib??, “Design and Construction of 3D Helmholtz Coil System to Calibrate 3D Hall Probes”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4228-4230.
- R. Mayer and N. Minatti, “Performance of a Superconducting 65-Cell-Structure in X-Band”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3314-3317.
Back to search