Favourites
For Word
[n] J. A. Holmes et al., “ORBIT: Beam Dynamics Calculations for High-Intensity Rings”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE022, pp. 1022-1024.
[n] T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 253-255. doi:10.18429/JACoW-NAPAC2022-MOPA87
[n] N. S. Sereno et al., “Bunch Length Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA10, pp. 1070-1072.
[n] P. Forck and A. Peters, “Non-Interfering Beam Diagnostic Developments”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MO203, pp. 13-17.
[n] V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
[n] E. F. Parker et al., “High Energy Polarized Deuterons at the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3200-3203.
[n] B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM056, unpublished.
[n] T. F. Wang and Y. Goren, “Voltage Counter-Phasing in the SSC Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 883-886.
[n] K. J. Hazelwood et al., “Disentangling Beam Losses in The Fermilab Main Injector Enclosure Using Real-Time Edge AI”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 273-279. doi:10.18429/JACoW-ICALEPCS2023-TU1BCO06
[n] A. Castilla et al., “Ka-Band Linearizer Studies for a Compact Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2976-2979. doi:10.18429/JACoW-IPAC2019-WEPRB068
[n] S. Harave and B. Morris, “Efficiency, Power Loss, and Power Factor Measurement of Quadrupole Magnet Power Supplies at the Spallation Neutron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2428-2430. doi:10.18429/JACoW-IPAC2021-TUPAB388
[n] O. Chimalpopoca et al., “Engineering, Manufacturing and Validation of Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA022, unpublished.
[n] M. Buttner, J. Lauener, K. Sigerud, M. Sobczak, N. Stapley, and P. Charrue, “The DIAMON Project -- Monitoring and Diagnostics for the CERN Controls Infrastructure”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA35, pp. 588-590.
[n] M. Xie, “Design Optimization for an X-Ray Free Electron Laser Driven by SLAC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG10, pp. 183-185.
[n] B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished.
[n] L. Walling, Y. Goren, N. Spayd, and E. Ruiz, “Beam Coupling Impedance Measurements and Simulations of a Beam Pipe Liner with Pumping Holes or Slots”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3405-3408.
[n] R. Koontz, “Design Optimization and Construction of the Thyratron/PFN Based Cost Model Modulator for the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP16, pp. 1512-1514.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Holmes et al., “ORBIT: Beam Dynamics Calculations for High-Intensity Rings”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE022, pp. 1022-1024.
- T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 253-255.
- N. S. Sereno et al., “Bunch Length Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA10, pp. 1070-1072.
- P. Forck and A. Peters, “Non-Interfering Beam Diagnostic Developments”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MO203, pp. 13-17.
- V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
- E. F. Parker et al., “High Energy Polarized Deuterons at the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3200-3203.
- B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM056, unpublished.
- T. F. Wang and Y. Goren, “Voltage Counter-Phasing in the SSC Low Energy Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 883-886.
- K. J. Hazelwood et al., “Disentangling Beam Losses in The Fermilab Main Injector Enclosure Using Real-Time Edge AI”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TU1BCO06, pp. 273-279.
- A. Castilla et al., “Ka-Band Linearizer Studies for a Compact Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2976-2979.
- S. Harave and B. Morris, “Efficiency, Power Loss, and Power Factor Measurement of Quadrupole Magnet Power Supplies at the Spallation Neutron Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2428-2430.
- O. Chimalpopoca et al., “Engineering, Manufacturing and Validation of Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA022, unpublished.
- M. Buttner, J. Lauener, K. Sigerud, M. Sobczak, N. Stapley, and P. Charrue, “The DIAMON Project -- Monitoring and Diagnostics for the CERN Controls Infrastructure”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA35, pp. 588-590.
- M. Xie, “Design Optimization for an X-Ray Free Electron Laser Driven by SLAC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG10, pp. 183-185.
- B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished.
- L. Walling, Y. Goren, N. Spayd, and E. Ruiz, “Beam Coupling Impedance Measurements and Simulations of a Beam Pipe Liner with Pumping Holes or Slots”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3405-3408.
- R. Koontz, “Design Optimization and Construction of the Thyratron/PFN Based Cost Model Modulator for the NLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP16, pp. 1512-1514.
Back to search
