JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. J. Ericson, D. Bertwistle, and M. J. Boland, “Energy Compression System Radio Frequency Design at the Canadian Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4231-4233. doi:10.18429/JACoW-IPAC2021-THPAB223
[n]	M. Moeini Rizi et al., “Light-induced enhancement of quantum efficiency in III-nitride photocathodes”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 786-789. doi:10.18429/JACoW-NAPAC2025-WEP055
[n]	H. O. Moser et al., “Synchrotron Radiation Research at Singapore Synchrotron Light Source”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM102, pp. XX-XX. 
[n]	R. M. Seraphim et al., “Large Vacuum Intervention to Install New BPMs and Radiation Absorbers in the LNLS Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA004, pp. 2475-2477. 
[n]	T. Idso, A. Ullattuparambil, M. Moeini Rizi, A. Rice, K. Alberi, and S. Karkare, “Investigating Dirac semimetal cadmium arsenide as a potential low-MTE photocathode”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 773-777. doi:10.18429/JACoW-NAPAC2025-WEP047
[n]	P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258. 
[n]	F. H. Cardoso, S. R. Marques, and X. R. Resende, “Comissioning of a BPM system for the LNLS Booster to Storage Ring Transfer Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP166, pp. 405-407. 
[n]	H. Tarawneh et al., “Universal mode of operation of the APPLE II undulators at the MAX IV 1.5 GeV ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1307-1310. doi:10.18429/JACoW-IPAC2025-TUPM066
[n]	Z. M. Dai, D. M. Li, G. Q. Lin, G. Y. Wu, M. Chen, and Z. T. Zhao, “An Intense Electron Linac for Pulsed Radiolysis Research at SINAP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11011, pp. XX-XX. 
[n]	T. Konstantin et al., “Cold Test of the Coaxial Cavity for Thermionic Triode Type RF Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI020, pp. 324-326. 
[n]	Y. Li et al., “In-situ Secondary Electron Yield Measurement System at CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP230, pp. 1253-1255. 
[n]	M. Warren et al., “Development of Hybrid Superconducting Photocathodes on Niobium Using High QE Coatings”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 205-209. doi:10.18429/JACoW-SRF2017-MOPB065
[n]	J. Campmany and M. Traveria, “Pulsed Magnets for Injection and Extraction at LSB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP125G, pp. 2491-2493. 
[n]	H. Hassanzadegan, A. Jansson, and A. J. Johansson, “Beam Position Monitor System of the ESS Linac”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP238, pp. 133-135. 
[n]	L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081. 
[n]	H. Zen et al., “Present Status of Mid-infrared Free Electron Laser Facility in Kyoto University”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA013, pp. 1190-1192. 
[n]	Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000. 
[n]	H. Hassanzadegan and F. P?®rez, “Analogue LLRF for the ALBA Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC147, pp. 1416-1418. 
[n]	X. He, J. Lei, and J. R. Zhang, “Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2422-2424. doi:10.18429/JACoW-IPAC2018-WEPMF031
[n]	J. Gronberg et al., “Lasers and Optics for a Gamma-Gamma Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH055, pp. 3801-3803. 
[n]	J. H. Dai, Z. M. Dai, and H. X. Deng, “Design of Shanghai High Power THz -FEL Source”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB06, pp. 271-273. 
[n]	R. J. Woolliscroft, C. Coles, M. Gerring, and M. R. Pearson, “Quick EXAFS Experiments Using a New GDA Eclipse RCP GUI with EPICS Hardware Control”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS002, pp. 771-774. 
[n]	A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 6-10. doi:10.18429/JACoW-MEDSI2018-TUOPMA04
[n]	M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4047-4049. doi:10.18429/JACoW-IPAC2016-THPOW046
[n]	P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143. 
[n]	H. Tomizawa et al., “Status of SPring-8 Photocathode Rf Gun for Future Light Sources”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP042, pp. XX-XX. 
[n]	F. P?®rez, H. Hassanzadegan, and A. Salom, “Analogue and Digital Low Level RF for the ALBA Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH194, pp. 1468-1470. 
[n]	J. P. Dai, B. Ni, J. Y. Zhai, and J. R. Zhang, “Design Study of a Compact Deflecting Cavity at IHEP”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2188-2190. doi:10.18429/JACoW-IPAC2016-WEPMB030
[n]	Y. Shoji et al., “NewSUBARU Storage Ring : Operational Progress in These Three Years”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THA101, pp. XX-XX. 
[n]	A. Mizuno, T. Higo, J. Odagiri, and H. Yonezawa, “X-Band Klystrons for Japan Linear Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1918-1921. 
[n]	Y. Ohkubo, H. Yonezawa, T. Shintake, H. Matsumoto, and N. Akasaka, “The C-Band 50MW Klystron Using Traveling-Wave Output Structure”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4071, pp. 932-934. 
[n]	H. Shaker, A. Bertwistle, E. J. Ericson, E. Soltan, and Y. Yousefi Sigari, “Study of Non-destructive BPM-Based Energy Measurement of the Canadian Light Source Linac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 438-441. doi:10.18429/JACoW-IBIC2023-WEP036
[n]	T. X. Zhao et al., “Design of a 1.3 GHZ Single 9 Cell SC Cavity Test Cryomodule for ILC Collaboration at IHEP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP008, pp. 2796-2798. 
[n]	M. Traveria, “A New Design For An Active-Passive Septum Magnet”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP26C, pp. 1966-1968. 
[n]	B. Song et al., “Time-of-flight control and passive compression in an Alpha-magnet beamline for MHz MeV UED”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5662, unpublished. 
[n]	M. P. Cox et al., “Vacuum System for the Diamond Light Source DDBA Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3587-3589. doi:10.18429/JACoW-IPAC2017-WEPVA136
[n]	C. Meng, X. P. Li, G. Pei, and J. R. Zhang, “The Progress of CEPC Positron Source Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 319-321. doi:10.18429/JACoW-IPAC2018-MOPMF084
[n]	J. Y. Zhai et al., “Dumbbell Fabrication and Tuning of the IHEP Large Grain 9-Cell Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO067, pp. 769-771. 
[n]	D. Wang et al., “Design Study on CEPC Positron Damping Ring and Bunch Compressor”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1318-1321. doi:10.18429/JACoW-IPAC2017-TUPAB009
[n]	H. X. Deng and Z. M. Dai, “Study of Short Seed Pulse Effects in High Gain Harmonic Generation Free Electron Laser”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH033, pp. 59-62. 
[n]	L. Zwalinski et al., “First Steps in Automated Software Development Approach for LHC Phase II Upgrades CO2 Detector Cooling Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1495. doi:10.18429/JACoW-ICALEPCS2019-WEPHA170
[n]	R. D. Porter et al., “High-performance Thin-film Niobium Produced via Chemical Vapor Deposition (CVD)”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 674-680. doi:10.18429/JACoW-SRF2017-WEXA03
[n]	R. Miyamoto et al., “First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1118-1121. doi:10.18429/JACoW-IPAC2019-MOPTS103
[n]	R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531. 
[n]	P. Echevarria et al., “Multipurpose Controller Based on a FPGA with EPICS Integration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBN4, pp. 1407-1409. 
[n]	S. Djekic et al., “Preliminary Design of BLISI, an Off Resonance Microwave Proton Source”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT007, pp. 130-132. 
[n]	S. Teixeira Lopez et al., “A Seamless Quarter-wave Resonator for HIE-ISOLDE”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 686-691. doi:10.18429/JACoW-SRF2017-WEYA03
[n]	J. Pang et al., “Design of 4 Ampere S-Band LINAC Using Slotted Iris Structure for HOM Damping”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2965-2967. doi:10.18429/JACoW-IPAC2018-THPAF011
[n]	Y. Qin et al., “Initial beam characterization from a cold field emitter in a VHF electron gun”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3617, unpublished. 
[n]	Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX. 
[n]	J. Campmany and M. Traveria, “Injection and Extraction Schemes of the LSB Booster and Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP123G, pp. 2488-2490. 
[n]	N. Sakamoto et al., “Construction and Performance Tests of Prototype Quarter-wave Resonator and Its Cryomodule at RIKEN”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 681-685. doi:10.18429/JACoW-SRF2017-WEYA02
[n]	S. G. Tantawi et al., “Experimental Demonstration of an RF System for the X-Band Linear Collider”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM104, pp. XX-XX. 
[n]	H. X. Deng and Z. M. Dai, “Three Dimensional Simulations on Harmonic Operation of Shanghai Deep Ultraviolet Free Electron Laser”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH032, pp. 55-58. 
[n]	Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX. 
[n]	D. Reschke et al., “Investigations on Superconducting 3 GHz Nine-cell Accelerator Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1283-1286. 
[n]	C. Pennington et al., “Demonstration of enhanced quantum efficiency from optical interference in alkali antimonide photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 634-637. doi:10.18429/JACoW-IPAC2024-MOPR79
[n]	S. Rubio-Manrique, F. Becheri, G. Cuní, R. H. Homs, and Z. Reszela, “Preliminary Design for the ALBA II Control System Stack”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 685-690. doi:10.18429/JACoW-ICALEPCS2023-TUPDP076
[n]	A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176. 
[n]	H. Yonezawa, M. Katoh, T. Shigematsu, and K. Shikano, “A Small Cyclotron for Use in Ion Beam Analysis”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-14, pp. 646-649. 
[n]	M. Wiencek, K. Kasprzak, D. Kostin, D. Reschke, and L. Steder, “Summary of the Superconducting Rf Measurements in AMTF Hall at DESY”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 248-252. doi:10.18429/JACoW-SRF2023-MOPMB058
[n]	X. H. Guo et al., “Cryogenic System for the ADS Injector II in IMP, CAS”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB044, pp. 576-578. 
[n]	H. Tomizawa et al., “Development of Adaptive Feedback Control System of Both Spatial and Temporal Beam Shaping for UV-Laser Light Source for RF Gun”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP80, pp. 207-209. 
[n]	A. Galdi et al., “Understanding the Growth Dynamics Cs-Sb Thin Films via In-Situ Characterization Techniques: Towards Epitaxial Alkali Antimonide Photocathodes”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2979-2982. doi:10.18429/JACoW-IPAC2021-WEPAB157
[n]	Z. Mart?¡, J. Campmany, and M. Traveria, “A General Method for 2d Magnet Pole Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF032, pp. 1672-1674. 
[n]	G. Perez Segurana et al., “Radiation-inclusive kickmap analysis of insertion devices and mitigation strategies for MAX4U”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2010, unpublished. 
[n]	K. Manukyan, I. A. Abid, M. Attal, M. Ebbeni, and E. Huttel, “Single Dipole Kicker Injection Into the Sesame Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1463-1465. doi:10.18429/JACoW-IPAC2017-TUPAB062
[n]	T. Idso, A. Ullattuparambil, M. Moeini Rizi, A. Rice, K. Alberi, and S. Karkare, “Investigating Dirac semimetal cadmium arsenide as a potential low-MTE photocathode”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP024, unpublished. 
[n]	K. P. Mondal et al., “Epitaxial growth of cesium potassium antimonide photocathode”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC44, unpublished. 
[n]	P. Owusu et al., “MTE measurements at the ASU cryogenically cooled DC electron gun”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2755-2757. doi:10.18429/JACoW-IPAC2025-THPM034
[n]	M. Moeini Rizi, A. Ullattuparambil, S. Karkare, P. Saha, L. Lathpandura, and L. Cultrera, “Light-induced enhancement of quantum efficiency in III-nitride photocathodes”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP027, unpublished. 
[n]	A. Matheisen et al., “Large Grain Superconducting RF Cavities at DESY”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP036, pp. 327-329. 
[n]	M. Gaowei et al., “Pulsed laser deposition assisted growth of alkali-based photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2057-2059. doi:10.18429/JACoW-IPAC2024-WEPC42
[n]	C. M. Bhat et al., “Recent Improvements in the Beam Capture at Fermilab Booster for High Intensity Operation”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 23-26. doi:10.18429/JACoW-HB2021-MOP02
[n]	C. Pennington et al., “Ultra thin Cs3Sb photocathodes with anomalously high quantum efficiency”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1605-1607. doi:10.18429/JACoW-IPAC2023-TUPA132
[n]	Z. Wang et al., “Sub-5-fs compression and synchronization of relativistic electron bunches for high-performance MeV UED at the upgraded FORTRESS beamline”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5661, unpublished. 
[n]	X. Geng, A. Groff, M. R. Pearson, and G. Taufer, “Motion Controls for ORNL Neutron Science Experimental Beamlines”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1261-1263. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO29
[n]	A. Galdi et al., “CsSb atomically smooth thin films as novel visible light photocathodes”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA144, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search