Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Baschke, H. Podlech, and W. A. Barth, “Upgrade of the HSI-RFQ at GSI to Fulfill the FAIR Requirements”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3727-3729. doi:10.18429/JACoW-IPAC2015-THPF020
[n] E. McCrory, “Emittance Measurement Techniques Used in the 1 MeV RFQ for the PET Isotope Linac at Fermilab”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP07, pp. 335-337.
[n] D. Merenich, D. Doran, X. Lu, J. Power, E. Wisniewski, and C. Whiteford, “Design and test of a metamaterial accelerating structure for Wakefield acceleration”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1496-1498. doi:10.18429/JACoW-IPAC2023-TUPA076
[n] H.-Ch. Schroeder, A. Affeldt, H. P. Gausepohl, G. Kube, and G. Priebe, “Bunch Length Measurement for PETRA III Light Source Storage Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD30, pp. 113-115.
[n] D. Dong, “Novel Conception of Beam Temperature in Accelerator and Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH160, pp. 1400-1401.
[n] B. T. Leemann, P. Merrill, H. K. Syversrud, R. Wada, and R. B. Yourd, “A Liquid Film Stripper for High Intensity Heavy Ion Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2794-2797.
[n] M. E. Veis, B. M. Korabelnikov, N. K. Kuksanov, P. I. Nemytov, R. A. Salimov, and A. N. Skrinsky, “Electron Beam with an Energy 1 MeV in the Recuperation Regime”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1361-1364.
[n] R. Kulaga et al., “Large-Scale Upgrade Campaigns of SCADA Systems at CERN - Organisation, Tools and Lessons Learned”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1384-1388. doi:10.18429/JACoW-ICALEPCS2017-THPHA021
[n] S. Hunt, “Purchasing Accelerator Subsystems as Turnkey Components”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUCI001, pp. XX-XX.
[n] P. Hermes et al., “Collimation quench test at the LHC with a 6.8 TeV proton beam”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 340-343. doi:10.18429/JACoW-IPAC2023-MOPA123
[n] L. Shang, W. Liu, Y. Lu, F. L. Shang, W. B. Song, and Z. B. Sun, “Status of the R&D for HALS Injection System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2335-2337. doi:10.18429/JACoW-IPAC2019-WEPMP015
[n] A. Y. Zelinsky et al., “Progress in Development of Kharkov X-Ray Generator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS075, pp. 3457-3459.
[n] J. Upadhyay, M. Nikolic, S. Popovic, L. Vuskovic, H. L. Phillips, and A-M. Valente-Feliciano, “Optimization of Ar/CL2 Plasma Parameters Used for SRF Cavity Etching”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO043, pp. 479-481.
[n] B. Meirose et al., “MAX IV Operations - Diagnostic Tools and Lessons Learned”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 209-213. doi:10.18429/JACoW-IBIC2019-MOPP045
[n] D. Juarez-Lopez, S. Lederer, and R. Wichmann, “The Transverse Energy and Momentum Analyser system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1794-1797. doi:10.18429/JACoW-IPAC2023-TUPL015
For LaTeX
Use Complete Form
For BibTeX
References
- M. Baschke, H. Podlech, and W. A. Barth, “Upgrade of the HSI-RFQ at GSI to Fulfill the FAIR Requirements”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3727-3729.
- E. McCrory, “Emittance Measurement Techniques Used in the 1 MeV RFQ for the PET Isotope Linac at Fermilab”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP07, pp. 335-337.
- D. Merenich, D. Doran, X. Lu, J. Power, E. Wisniewski, and C. Whiteford, “Design and test of a metamaterial accelerating structure for Wakefield acceleration”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA076, pp. 1496-1498.
- H.-Ch. Schroeder, A. Affeldt, H. P. Gausepohl, G. Kube, and G. Priebe, “Bunch Length Measurement for PETRA III Light Source Storage Ring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD30, pp. 113-115.
- D. Dong, “Novel Conception of Beam Temperature in Accelerator and Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH160, pp. 1400-1401.
- B. T. Leemann, P. Merrill, H. K. Syversrud, R. Wada, and R. B. Yourd, “A Liquid Film Stripper for High Intensity Heavy Ion Beams”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2794-2797.
- M. E. Veis, B. M. Korabelnikov, N. K. Kuksanov, P. I. Nemytov, R. A. Salimov, and A. N. Skrinsky, “Electron Beam with an Energy 1 MeV in the Recuperation Regime”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1361-1364.
- R. Kulaga et al., “Large-Scale Upgrade Campaigns of SCADA Systems at CERN - Organisation, Tools and Lessons Learned”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1384-1388.
- S. Hunt, “Purchasing Accelerator Subsystems as Turnkey Components”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUCI001, pp. XX-XX.
- P. Hermes et al., “Collimation quench test at the LHC with a 6.8 TeV proton beam”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA123, pp. 340-343.
- L. Shang, W. Liu, Y. Lu, F. L. Shang, W. B. Song, and Z. B. Sun, “Status of the R&D for HALS Injection System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2335-2337.
- A. Y. Zelinsky et al., “Progress in Development of Kharkov X-Ray Generator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS075, pp. 3457-3459.
- J. Upadhyay, M. Nikolic, S. Popovic, L. Vuskovic, H. L. Phillips, and A-M. Valente-Feliciano, “Optimization of Ar/CL2 Plasma Parameters Used for SRF Cavity Etching”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO043, pp. 479-481.
- B. Meirose et al., “MAX IV Operations - Diagnostic Tools and Lessons Learned”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 209-213.
- D. Juarez-Lopez, S. Lederer, and R. Wichmann, “The Transverse Energy and Momentum Analyser system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL015, pp. 1794-1797.
Back to search