JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. B. Rosenthal et al., “First Results for a 50 MeV Beam Induced Fluorescence Monitor for Beam Profile Measurements”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 418-420. doi:10.18429/JACoW-IBIC2023-WEP030
[n]	P. N. Ostroumov and F. Gerigk, “Closing Plenary Summary of Working Group E: High-Intensity Linacs & Rings: New Facilities and Concepts”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL05, pp. 493-495. 
[n]	A. M. Sessler, “The Electron Ring Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-2, pp. 606-607. 
[n]	A. P. Zhukov, S. Assadi, R. Dickson, V. Gaidash, and J. Pogge, “SNS BLM System Evolution: Detectors, Electronics, and Software”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP038, pp. 4853-4855. 
[n]	Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603. 
[n]	D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n]	W. F. Frentrup, A. G. Gaupp, B. Kuske, A. M. Meseck, and M. S. Scheer, “Undulators for the BESSY Soft-X-Ray FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS03, pp. XX-XX. 
[n]	V. A. Andreev et al., “Injector of High-current Multicharge Heavy Ions Beam for the TWAC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23H, pp. 755-757. 
[n]	R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519. 
[n]	P. J. Bell, V. H. Hardion, M. Lindberg, V. Martos, and M. Sj?Âstr?Âm, “A General Multiple-Input Multiple-Output Feedback Device in Tango for the MAX IV Accelerators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1085. doi:10.18429/JACoW-ICALEPCS2019-WEPHA012
[n]	M. G. Grzegrzolka, K. Czuba, and I. Rutkowski, “Concept of Cavity Simulator for European Spallation Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1666-1669. doi:10.18429/JACoW-ICALEPCS2017-THPHA123
[n]	Ph. Gayet, E. Blanco Vinuela, B. Bradu, and R. Cirillo, “Online Analysis for Anticipated Failure Diagnostics of the CERN Cryogenic Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1412-1415. doi:10.18429/JACoW-ICALEPCS2017-THPHA030
[n]	Yu. Shatunov and V. Yakimenko, “Simulation of the Acceleration of Polarized Protons in Circular Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR31, pp. 3427-3430. 
[n]	H. Hotchi, “Status of J-PARC Commissioning”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper OPL02, pp. 6-15. 
[n]	S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469. 
[n]	I. Neththikumara, G. A. Krafft, Y. Roblin, and B. Terzi, “Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 553-555. doi:10.18429/JACoW-NAPAC2019-TUPLO09
[n]	T. Ladzinski, F. Havart, P. Ninin, E. Sanchez-Corral Mena, F. Valentini, and D. Vaxelaire, “New Concepts for Access Devices in the SPS Personnel Protection System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1608-1612. doi:10.18429/JACoW-ICALEPCS2017-THPHA099
[n]	V. Ptitsin, S. Tepikian, and J. Wei, “BNL-Built LHC Magnet Error Impact Analysis and Compensation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP43, pp. 1575-1577. 
[n]	A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3888-3890. doi:10.18429/JACoW-IPAC2018-THPAL107
[n]	H. Henke, “Diffraction Radiation of Charges Moving Past Conducting Screens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 868-871. 
[n]	A. V. Feschenko, P. N. Ostroumov, S. A. Petronevich, and S. I. Sharamentov, “Precise Energy Measurement of the Continuous Proton Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1409-1411. 
[n]	E. N. Shaposhnikova, “Intensity Upgrade Plans for CERN-LHC Injectors”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper OPL03, pp. 16-21. 
[n]	J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO018
[n]	W. Venturini Delsolaro et al., “Status of the SRF Systems at HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA01, pp. 481-487. 
[n]	R. D. Walton et al., “Mapping Developments at Diamond”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1111-1114. doi:10.18429/JACoW-ICALEPCS2015-THHB3O01
[n]	Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70. 
[n]	S. Lenz, W. Hauth, and E. Pivit, “Introduction of a New Class of High-Power Y-Junction Circulators: The 352MHz/1.5MW Type Designed for CERN/LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1246-1249. 
[n]	C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428. 
[n]	K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42. 
[n]	N. Guillotin, J. Jacob, and V. Serriere, “Development of HOM Damped Copper Cavity for the ESRF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH099, pp. 1244-1246. 
[n]	M. Chung et al., “Longitudinal Electron Bunch Shaping Experiments at the PAL-ITF”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 694-697. doi:10.18429/JACoW-FEL2015-WEP060
[n]	N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190. 
[n]	I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142. 
[n]	J. Christie, E. Snedden, J. Henderson, and L. Corner, “Optimisation of a fibre-based two-colour balanced optical cross-correlator”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 795-799. doi:10.18429/JACoW-IBIC2025-WEPMO28
[n]	R. B. Fiorito, S. E. Caldwell, S. G. Iversen, J. S. Ladish, X. K. Maruyama, and D. W. Rule, “Optical Transition Radiation Diagnostics for Low Emittance, High Energy, Charged Particle Beams”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1078-1081. 
[n]	S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309. 
[n]	M. Ritzert, “Interfacing EPICS to the Widespread Platform Management Interface IPMI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 746-748. doi:10.18429/JACoW-ICALEPCS2015-WEPGF024
[n]	M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498. 
[n]	E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search