Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2550-2553. doi:10.18429/JACoW-IPAC2019-WEPGW036
[n] J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 386-389.
[n] J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
[n] M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
[n] H. K. Sayed, S. A. Bogacz, and Y. Roblin, “Correction of the Chromaticity up to Second Order for MEIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB045, pp. 1629-1631.
[n] N. A. Huque et al., “BNL 56 MHz HOM Damper Fabrication at JLab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB063, pp. 1262-1266.
[n] M. Svandrlik et al., “Elettra New Full Energy Injector Status Report”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS033, pp. 3356-3358.
[n] K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
[n] H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
[n] J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] J. Dey, I. Kourbanis, and J. Steimel, “2.5 MHz Feedforward Beam Loading Compensation in the Fermilab Main Injector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB030, pp. 3356-3358.
[n] N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1962-1964. doi:10.18429/JACoW-IPAC2014-WEPRO011
[n] S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
[n] T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
[n] D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3995-3997. doi:10.18429/JACoW-IPAC2014-THPRI095
[n] H. K. Sayed et al., “TOWARDS A GLOBAL OPTIMIZATION OF THE MUON ACCELERATOR FRONT END”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA11, pp. 547-549.
[n] N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
[n] K. Casarin et al., “Experience with Aluminium Vacuum Chambers at ELETTRA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B09, pp. 2292-2294.
[n] K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
[n] N. Yamamoto et al., “Highly Polarized and High Quantum Efficiency Electron Source Using Transmission-type Photocathode”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAB01, pp. 1950-1952.
[n] A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
[n] H. K. Sayed, J. S. Berg, H. G. Kirk, and K. T. McDonald, “Impact of the Initial Proton Bunch Length on the Performance of the Muon Front End”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA10, pp. 544-546.
[n] R. Cappi, N. Garoby, N. Rasmussen, J. P. Riunaud, H. Schoenauer, and K. Schindl, “Upgrading the CERN PS Booster to 1 GeV for Improved Antiproton Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1614-1617.
[n] S. Cousineau et al., “Measurement of Space Charge Effect on Transverse Emittance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH028, pp. 2911-2913.
[n] T. Hays, P. Barnes, H. Padamsee, and J. Sears, “Performance of a High RRR Russian Nb 1.3 GHz TESLA Multicell Cavity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C15, pp. 441-442.
[n] N. Yamamoto et al., “Accelerators of the Central Japan Synchrotron Radiation Research Facility Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA036, pp. 2567-2569.
[n] J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 489-491. doi:10.18429/JACoW-IPAC2014-MOPME050
[n] Y. Sato et al., “Push-Pull Amplifier for MA-Loaded Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D008, pp. 396-398.
[n] A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
[n] X. J. Wang and H. G. Kirk, “The Brookhaven ATF Low-Emittance Beam Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 604-607.
[n] J. Dey, I. Kourbanis, and D. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ13, pp. 3312-3314.
[n] M. Uesaka, F. Sakamoto, and A. Sakumi, “Pinpoint keV/MeV X-ray Sources for X-ray Drug Delivery System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN035, pp. 2793-2795.
[n] H. Loos et al., “Measurements of Transverse and Longitudinal Electron Beam Phase Space Distributions at the Gun Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP065, pp. XX-XX.
[n] E. Nordberg, “Excitation of Radial Oscillations in the Beam of the Synchrocyclotron by the Peripheral Cee”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 973-977.
[n] M. A. Fraser et al., “Modelling the Radioactivity Induced by Slow-Extraction Losses in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1897-1900. doi:10.18429/JACoW-IPAC2017-TUPIK086
[n] L. Jin, D. Kaltchev, F. Schmidt, and A. Verdier, “Correction of the Systematic b3 Error with the Resonance-free Lattice in the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B09, pp. 1561-1563.
[n] A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
[n] R. Cappi et al., “The CERN PS Complex as Part of the LHC Injector Chain”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 171-174.
[n] M. Fujieda et al., “An RF Cavity for Barrier Bucket Experiment in the AGS”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D012, pp. 408-410.
[n] S. A. Kahn, D. Cline, A. A. Garren, H. G. Kirk, and F. E. Mills, “Design of a Magnet System for a Muon Cooling Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT057, pp. 3366-3368.
[n] M. Eguiraun et al., “MAX IV BioMAX Beamline Control System: From Commissioning Into User Operation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 318-322. doi:10.18429/JACoW-ICALEPCS2017-TUMPL08
[n] Y. He et al., “Design and Operation of the Cryostat for the CESR-c Superconducting Wiggler Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE037, pp. 2399-2401.
[n] C. Ohmori et al., “RF Systems for JHF Synchrotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E104, pp. 602-604.
[n] M. Hirose, X. Liu, K. Takayama, and T. Yoshimoto, “Beam Confinement Dynmics in a Barrier Bucket”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA22, pp. 92-94.
[n] S. M. Ben Abdillah, R. Roux, and A. Bechtold, “Realization of a Faraday cup for the gun of PERLE”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 268-271. doi:10.18429/JACoW-IBIC2025-MOPMO36
[n] G. Cheng et al., “Magnetic Hygiene Control on LCLS-II Cryomodules Fabricated at JLab”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 153-157. doi:10.18429/JACoW-SRF2017-MOPB044
[n] C. Tambasco et al., “First BTF Measurements at the Large Hadron Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3051-3054. doi:10.18429/JACoW-IPAC2016-WEPOY030
[n] M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 476-478. doi:10.18429/JACoW-IPAC2014-MOPME046
[n] S. Sasaki, T. T. Nakamura, and M. Hirose, “Monitoring System for IT Infrastructure and EPICS Control System at SuperKEKB”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1417. doi:10.18429/JACoW-ICALEPCS2019-WEPHA134
[n] L. Froehlich, S. Grulja, and F. Loehl, “DOSFET-L02: An Advanced Online Dosimetry System for RADFET Sensors”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC45, pp. 481-484.
[n] A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4037-4039. doi:10.18429/JACoW-IPAC2017-THPAB135
[n] R. Appio, P. Craievich, G. Penco, and M. Veronese, “Absolute Bunch Length Measurements at Fermi@ELETTRA FEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUAL3, pp. 312-315.
[n] J. Chambrillon et al., “Assembly of the IFMIF SRF Linac cryomodule”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1570-1573. doi:10.18429/JACoW-IPAC2025-TUPS062
[n] P. J. Van Arsdall et al., “National Ignition Facility Project Completion and Control System Status”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP078, pp. 260-262.
[n] P. Barnes et al., “Superconducting RF System for the CESR Luminosity Upgrade: Design, Status and Plans”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP012L, pp. 2100-2102.
[n] K. Saito et al., “Higher Harmonics Beam Loading Compensation for a Broad Band MA-Loaded RF Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D010, pp. 402-404.
[n] K. Ito et al., “Development of Pulsed Multipole Magnet for Aichi SR Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1616-1618. doi:10.18429/JACoW-IPAC2015-TUPJE005
[n] J.-L. Revol et al., “Highlights of Accelerator Activities in France on Behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 470-473. doi:10.18429/JACoW-IPAC2018-MOPML031
[n] N. Yamamoto et al., “Quantum Efficiency Improvement of Polarized Electron Source using Strain Compensated Super Lattice Photocathode”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2479-2481. doi:10.18429/JACoW-IPAC2015-WEAD3
[n] W. J. DeHope, K. L. Griffin, R. Kihara, M. M. Ong, and O. Ross, “An Improved SF6 System for the FXR Induction Linac Blumlein Switches”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS015, pp. 2361-2363.
[n] ?à. Andersson et al., “Using Super-ACO's Fifth Harmonic Cavity as a Passive Landau Cavity”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B14, pp. 1960-1962.
[n] N. Yamamoto, M. Hosaka, A. Mano, T. Miyauchi, Y. Takashima, and M. Katoh, “Electron Beam Generation From InGaN/GaN Superlattice Photocathode”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 522-524. doi:10.18429/JACoW-IPAC2017-MOPIK011
[n] K. Bongardt and K. Kennepohl, “Determination of 100 psec Short Linac Bunches by Broadband Pickups and Reconstruction Technique”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 976-979.
[n] L. J. Laslett and A. M. Sessler, “A Method for Static-Field Compression in an Electron-Ring Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1034-1039.
[n] D. B. Hopkins and A. M. Sessler, “Status of LBL/LLNL FEL Research for Two Beam Accelerator Applications”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1262-1265.
[n] A. Galimberti, C. J. Bocchetta, A. Gambitta, G. Paolucci, G. Paolicelli, and G. Stefani, “A New Approach to Photon Beam Position Monitoring at ELETTRA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA78, pp. 2060-2062.
[n] S. Wang et al., “Proposal of the Southern Advanced Photon Source and Current Physics Design Study”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 300-303. doi:10.18429/JACoW-IPAC2021-MOPAB075
[n] T. Rizawa, M. Nakano, K. Satoh, Y. Satoh, and Y. Tanabe, “R. F. Characteristics of 508 MHz Slot-Coupled Mulit-Cell Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 916-919.
[n] J. Q. Qiu, H. Chen, and C.-X. Tang, “PIC Simulation of the Coaxial Magnetron for Low Energy X-band Linear Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA067, pp. 232-234.
[n] J. Shi, L. Jin, D. Wang, and F. Wang, “Beam-Beam Effects in the Ring-Ring Version of eRHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP017, pp. 1520-1522.
[n] A. Galimberti, R. Borghes, G. Paolucci, R. Presacco, G. Paolicelli, and G. Stefani, “The Next Generation of Photon Beam Position Monitors for Undulator Beamlines”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB009, pp. 544-546.
[n] M. G. Billing, G. Codner, D. Hartill, R. Meller, J. Sikora, and V. Vescherevich, “Performance of the Beam Stabilizing Feedback Systems at CESR”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH006, pp. 1243-1245.
[n] M. Billardon et al., “Beam Dynamics in Super-ACO with a New 500 MHz Fifth Harmonic RF System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP12G, pp. 954-956.
[n] K. M. Wilson et al., “Production of Copper-Plated Beamline Bellows and Spools for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1167-1169. doi:10.18429/JACoW-IPAC2017-MOPVA132
[n] T. Ebisawa et al., “Operational Consideration in the LIPAc SRF with Potential Solenoid Failure Modes”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 467-470. doi:10.18429/JACoW-SRF2023-TUPTB031
[n] K. Koba, J. Dey, I. Kourbanis, and J. Reid, “Beam Loading Compensation Requirements for Multibatch Coalescing in Fermilab Main Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH048, pp. 879-881.
[n] R. Appio, P. Craievich, M. Ferianis, and M. Veronese, “Simulations of the Coherent Gap Radiation for the Bunch Length Monitor of FERMI@Elettra”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD37, pp. 134-136.
[n] N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687. doi:10.18429/JACoW-SRF2021-WEOCAV03
[n] T. Sloan, O. Dermois, and M. Yurko, “Fabrication and Magnetic Field Measurements of the IUCF Cooler Ring Dipole Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1443-1446.
[n] V. Da Silva et al., “DAQ System Based on Tango, Sardana and PandABox for Millisecond Time Resolved Experiment at the CoSAXS Beamline of MAX IV Laboratory”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 713-717. doi:10.18429/JACoW-ICALEPCS2023-TUPDP083
[n] M. J. Lee, E. D. Courant, C. Pellegrini, and A. M. Sessler, “Beam Amplitude Behavior upon Crossing a Linear Coupling Resonance with Damping in One Dimension”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 176-180.
[n] P. Brunelle, G. Flynn, M. P. Level, A. Nadji, M. Sommer, and H. Zyngier, “Experiments with Low and Negative Momentum Compaction Factor with Super-ACO”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP090G, pp. 676-678.
[n] M. A. K. Othman, B. J. Angier, A. A. Haase, E. A. Nanni, M. R. Roux, and A. V. Sy, “Prototyping of Brazed mm-Wave Accelerating Structures”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3764-3765. doi:10.18429/JACoW-IPAC2019-THPGW078
[n] J. Dey, J. Reid, and J. M. Steimel, “Narrowband Beam Loading Compensation in the Fermilab Main Injector Accelerating Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH047, pp. 876-878.
[n] M. Veronese et al., “A Nanofabricated Wirescanner: Design, Fabrication and Experimental Results”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 314-317. doi:10.18429/JACoW-IBIC2017-WE2AB3
[n] R. Bakker et al., “Operation of the Super-Aco Free Electron Laser with a Feedback Damping Quadrupolar Coherent Synchrotron Oscillation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP03G, pp. 679-684.
[n] T. Tajima et al., “Recent Development of HOM Absorbers for KEKB Superconducting Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C34, pp. 709-724.
[n] M. Ball et al., “Phase Modulation Induced Particle Diffusion”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP11C, pp. 1256-1258.
[n] F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
[n] S. Mitsunobu et al., “High Power Test of the Input Coupler for KEKB SC Cavity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F36, pp. 735-739.
[n] A. Fukasawa et al., “X-Band Thermionic Cathode RF Gun at UTNL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP019, pp. 1646-1648.
[n] W. Liu et al., “A Novel Design of a Laser Phase Monitor for AWA RF Photocathode Electron Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4076-4077. doi:10.18429/JACoW-IPAC2019-THPRB107
[n] T. Natsui, K. Lee, A. Mori, F. Sakamoto, and M. Uesaka, “Beam Measurement Experiment of X-band Linac for Compton Scattering X-ray Generation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA010, pp. 82-84.
[n] D. H. Whittum, B. Autin, and A. M. Sessler, “Plasma Compensation Effects with Relativistic Electron Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1812-1815.
[n] J. A. Safranek et al., “SPEAR3 Accelerator Physics Update”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS055, pp. 1311-1313.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2550-2553.
- J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 386-389.
- J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
- M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
- H. K. Sayed, S. A. Bogacz, and Y. Roblin, “Correction of the Chromaticity up to Second Order for MEIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB045, pp. 1629-1631.
- N. A. Huque et al., “BNL 56 MHz HOM Damper Fabrication at JLab”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB063, pp. 1262-1266.
- M. Svandrlik et al., “Elettra New Full Energy Injector Status Report”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS033, pp. 3356-3358.
- K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
- H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
- J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- J. Dey, I. Kourbanis, and J. Steimel, “2.5 MHz Feedforward Beam Loading Compensation in the Fermilab Main Injector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB030, pp. 3356-3358.
- N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1962-1964.
- S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
- T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
- D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3995-3997.
- H. K. Sayed et al., “TOWARDS A GLOBAL OPTIMIZATION OF THE MUON ACCELERATOR FRONT END”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA11, pp. 547-549.
- N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
- K. Casarin et al., “Experience with Aluminium Vacuum Chambers at ELETTRA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B09, pp. 2292-2294.
- K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
- N. Yamamoto et al., “Highly Polarized and High Quantum Efficiency Electron Source Using Transmission-type Photocathode”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOAB01, pp. 1950-1952.
- A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
- H. K. Sayed, J. S. Berg, H. G. Kirk, and K. T. McDonald, “Impact of the Initial Proton Bunch Length on the Performance of the Muon Front End”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA10, pp. 544-546.
- R. Cappi, N. Garoby, N. Rasmussen, J. P. Riunaud, H. Schoenauer, and K. Schindl, “Upgrading the CERN PS Booster to 1 GeV for Improved Antiproton Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1614-1617.
- S. Cousineau et al., “Measurement of Space Charge Effect on Transverse Emittance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH028, pp. 2911-2913.
- T. Hays, P. Barnes, H. Padamsee, and J. Sears, “Performance of a High RRR Russian Nb 1.3 GHz TESLA Multicell Cavity”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C15, pp. 441-442.
- N. Yamamoto et al., “Accelerators of the Central Japan Synchrotron Radiation Research Facility Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA036, pp. 2567-2569.
- J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 489-491.
- Y. Sato et al., “Push-Pull Amplifier for MA-Loaded Cavity”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D008, pp. 396-398.
- A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
- X. J. Wang and H. G. Kirk, “The Brookhaven ATF Low-Emittance Beam Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 604-607.
- J. Dey, I. Kourbanis, and D. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ13, pp. 3312-3314.
- M. Uesaka, F. Sakamoto, and A. Sakumi, “Pinpoint keV/MeV X-ray Sources for X-ray Drug Delivery System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN035, pp. 2793-2795.
- H. Loos et al., “Measurements of Transverse and Longitudinal Electron Beam Phase Space Distributions at the Gun Test Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP065, pp. XX-XX.
- E. Nordberg, “Excitation of Radial Oscillations in the Beam of the Synchrocyclotron by the Peripheral Cee”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 973-977.
- M. A. Fraser et al., “Modelling the Radioactivity Induced by Slow-Extraction Losses in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1897-1900.
- L. Jin, D. Kaltchev, F. Schmidt, and A. Verdier, “Correction of the Systematic b3 Error with the Resonance-free Lattice in the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B09, pp. 1561-1563.
- A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
- R. Cappi et al., “The CERN PS Complex as Part of the LHC Injector Chain”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 171-174.
- M. Fujieda et al., “An RF Cavity for Barrier Bucket Experiment in the AGS”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D012, pp. 408-410.
- S. A. Kahn, D. Cline, A. A. Garren, H. G. Kirk, and F. E. Mills, “Design of a Magnet System for a Muon Cooling Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT057, pp. 3366-3368.
- M. Eguiraun et al., “MAX IV BioMAX Beamline Control System: From Commissioning Into User Operation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 318-322.
- Y. He et al., “Design and Operation of the Cryostat for the CESR-c Superconducting Wiggler Magnets”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE037, pp. 2399-2401.
- C. Ohmori et al., “RF Systems for JHF Synchrotrons”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E104, pp. 602-604.
- M. Hirose, X. Liu, K. Takayama, and T. Yoshimoto, “Beam Confinement Dynmics in a Barrier Bucket”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA22, pp. 92-94.
- S. M. Ben Abdillah, R. Roux, and A. Bechtold, “Realization of a Faraday cup for the gun of PERLE”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 268-271.
- G. Cheng et al., “Magnetic Hygiene Control on LCLS-II Cryomodules Fabricated at JLab”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 153-157.
- C. Tambasco et al., “First BTF Measurements at the Large Hadron Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3051-3054.
- M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 476-478.
- S. Sasaki, T. T. Nakamura, and M. Hirose, “Monitoring System for IT Infrastructure and EPICS Control System at SuperKEKB”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1417.
- L. Froehlich, S. Grulja, and F. Loehl, “DOSFET-L02: An Advanced Online Dosimetry System for RADFET Sensors”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC45, pp. 481-484.
- A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4037-4039.
- R. Appio, P. Craievich, G. Penco, and M. Veronese, “Absolute Bunch Length Measurements at Fermi@ELETTRA FEL”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUAL3, pp. 312-315.
- J. Chambrillon et al., “Assembly of the IFMIF SRF Linac cryomodule”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS062, pp. 1570-1573.
- P. J. Van Arsdall et al., “National Ignition Facility Project Completion and Control System Status”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP078, pp. 260-262.
- P. Barnes et al., “Superconducting RF System for the CESR Luminosity Upgrade: Design, Status and Plans”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP012L, pp. 2100-2102.
- K. Saito et al., “Higher Harmonics Beam Loading Compensation for a Broad Band MA-Loaded RF Cavity”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D010, pp. 402-404.
- K. Ito et al., “Development of Pulsed Multipole Magnet for Aichi SR Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1616-1618.
- J.-L. Revol et al., “Highlights of Accelerator Activities in France on Behalf of the Accelerator Division of the French Physics Society”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 470-473.
- N. Yamamoto et al., “Quantum Efficiency Improvement of Polarized Electron Source using Strain Compensated Super Lattice Photocathode”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2479-2481.
- W. J. DeHope, K. L. Griffin, R. Kihara, M. M. Ong, and O. Ross, “An Improved SF6 System for the FXR Induction Linac Blumlein Switches”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS015, pp. 2361-2363.
- ?à. Andersson et al., “Using Super-ACO's Fifth Harmonic Cavity as a Passive Landau Cavity”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B14, pp. 1960-1962.
- N. Yamamoto, M. Hosaka, A. Mano, T. Miyauchi, Y. Takashima, and M. Katoh, “Electron Beam Generation From InGaN/GaN Superlattice Photocathode”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 522-524.
- K. Bongardt and K. Kennepohl, “Determination of 100 psec Short Linac Bunches by Broadband Pickups and Reconstruction Technique”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 976-979.
- L. J. Laslett and A. M. Sessler, “A Method for Static-Field Compression in an Electron-Ring Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1034-1039.
- D. B. Hopkins and A. M. Sessler, “Status of LBL/LLNL FEL Research for Two Beam Accelerator Applications”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1262-1265.
- A. Galimberti, C. J. Bocchetta, A. Gambitta, G. Paolucci, G. Paolicelli, and G. Stefani, “A New Approach to Photon Beam Position Monitoring at ELETTRA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA78, pp. 2060-2062.
- S. Wang et al., “Proposal of the Southern Advanced Photon Source and Current Physics Design Study”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 300-303.
- T. Rizawa, M. Nakano, K. Satoh, Y. Satoh, and Y. Tanabe, “R. F. Characteristics of 508 MHz Slot-Coupled Mulit-Cell Cavity”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 916-919.
- J. Q. Qiu, H. Chen, and C.-X. Tang, “PIC Simulation of the Coaxial Magnetron for Low Energy X-band Linear Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA067, pp. 232-234.
- J. Shi, L. Jin, D. Wang, and F. Wang, “Beam-Beam Effects in the Ring-Ring Version of eRHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP017, pp. 1520-1522.
- A. Galimberti, R. Borghes, G. Paolucci, R. Presacco, G. Paolicelli, and G. Stefani, “The Next Generation of Photon Beam Position Monitors for Undulator Beamlines”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB009, pp. 544-546.
- M. G. Billing, G. Codner, D. Hartill, R. Meller, J. Sikora, and V. Vescherevich, “Performance of the Beam Stabilizing Feedback Systems at CESR”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH006, pp. 1243-1245.
- M. Billardon et al., “Beam Dynamics in Super-ACO with a New 500 MHz Fifth Harmonic RF System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP12G, pp. 954-956.
- K. M. Wilson et al., “Production of Copper-Plated Beamline Bellows and Spools for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1167-1169.
- T. Ebisawa et al., “Operational Consideration in the LIPAc SRF with Potential Solenoid Failure Modes”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB031, pp. 467-470.
- K. Koba, J. Dey, I. Kourbanis, and J. Reid, “Beam Loading Compensation Requirements for Multibatch Coalescing in Fermilab Main Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH048, pp. 879-881.
- R. Appio, P. Craievich, M. Ferianis, and M. Veronese, “Simulations of the Coherent Gap Radiation for the Bunch Length Monitor of FERMI@Elettra”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD37, pp. 134-136.
- N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687.
- T. Sloan, O. Dermois, and M. Yurko, “Fabrication and Magnetic Field Measurements of the IUCF Cooler Ring Dipole Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1443-1446.
- V. Da Silva et al., “DAQ System Based on Tango, Sardana and PandABox for Millisecond Time Resolved Experiment at the CoSAXS Beamline of MAX IV Laboratory”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP083, pp. 713-717.
- M. J. Lee, E. D. Courant, C. Pellegrini, and A. M. Sessler, “Beam Amplitude Behavior upon Crossing a Linear Coupling Resonance with Damping in One Dimension”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 176-180.
- P. Brunelle, G. Flynn, M. P. Level, A. Nadji, M. Sommer, and H. Zyngier, “Experiments with Low and Negative Momentum Compaction Factor with Super-ACO”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP090G, pp. 676-678.
- M. A. K. Othman, B. J. Angier, A. A. Haase, E. A. Nanni, M. R. Roux, and A. V. Sy, “Prototyping of Brazed mm-Wave Accelerating Structures”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3764-3765.
- J. Dey, J. Reid, and J. M. Steimel, “Narrowband Beam Loading Compensation in the Fermilab Main Injector Accelerating Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH047, pp. 876-878.
- M. Veronese et al., “A Nanofabricated Wirescanner: Design, Fabrication and Experimental Results”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 314-317.
- R. Bakker et al., “Operation of the Super-Aco Free Electron Laser with a Feedback Damping Quadrupolar Coherent Synchrotron Oscillation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP03G, pp. 679-684.
- T. Tajima et al., “Recent Development of HOM Absorbers for KEKB Superconducting Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C34, pp. 709-724.
- M. Ball et al., “Phase Modulation Induced Particle Diffusion”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP11C, pp. 1256-1258.
- F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
- S. Mitsunobu et al., “High Power Test of the Input Coupler for KEKB SC Cavity”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F36, pp. 735-739.
- A. Fukasawa et al., “X-Band Thermionic Cathode RF Gun at UTNL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP019, pp. 1646-1648.
- W. Liu et al., “A Novel Design of a Laser Phase Monitor for AWA RF Photocathode Electron Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4076-4077.
- T. Natsui, K. Lee, A. Mori, F. Sakamoto, and M. Uesaka, “Beam Measurement Experiment of X-band Linac for Compton Scattering X-ray Generation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA010, pp. 82-84.
- D. H. Whittum, B. Autin, and A. M. Sessler, “Plasma Compensation Effects with Relativistic Electron Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1812-1815.
- J. A. Safranek et al., “SPEAR3 Accelerator Physics Update”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS055, pp. 1311-1313.
Back to search