Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1075-1078. doi:10.18429/JACoW-IPAC2025-TUPB048
[n] S. V. Furuseth and X. Buffat, “Loss of Transverse Landau Damping by Diffusion in High-Energy Hadron Colliders”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1286-1289. doi:10.18429/JACoW-IPAC2021-TUXA06
[n] C. Phillips et al., “Experimental demonstration of a straight-merger beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3233-3235. doi:10.18429/JACoW-IPAC2023-WEPL053
[n] O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
[n] J. Pham et al., “Standardizing MicroTCA integration into the TANGO control system via ChimeraTK and OPC UA at SOLEIL”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 724-728. doi:10.18429/JACoW-ICALEPCS2025-TUPD099
[n] A. E. Bondarchenko et al., “Production of Metal Ion Beams From ECR Ion Sources”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 137-139. doi:10.18429/JACoW-ECRIS2020-WEXZO05
[n] R. Ganter et al., “Overview of the Soft X-Ray Line Athos at SwissFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 125-128. doi:10.18429/JACoW-FEL2017-MOP038
[n] R. Mamutov, G. Baranov, and A. Gerasev, “Real-time luminosity optimization in collider experiments using reinforcement learning”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3115-3116. doi:10.18429/JACoW-IPAC2025-THPS072
[n] N. Mirian, “Optical Klystron Operation in the Terahertz Regime”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2090, unpublished.
[n] M. J. Grabski and E. Al-Dmour, “Overview and Challenges of the Vacuum Systems of Diffraction Limited Storage Rings”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH4D1, unpublished.
[n] S. V. Furuseth and X. Buffat, “Change of Beam Distribution Due to Decoherence in the Presence of Transverse Feedback”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 281-284. doi:10.18429/JACoW-IPAC2019-MOPGW078
[n] M. Moscatello et al., “NEWGAIN project at GANIL-SPIRAL2 : design of the new heavy ion injector for the superconducting linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1765-1767. doi:10.18429/JACoW-IPAC2023-TUPA193
[n] A. Moutardier et al., “Injection Feedback for a Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2870-2873. doi:10.18429/JACoW-IPAC2021-WEPAB117
[n] A. Wilson, S. Shrishrimal, M. Keenan, R. S. P. Chillara, E. Nkwocha, and F. Moguel, “LCLS-II cavity heater controls: design, operation, and accuracy”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper WEPD009, unpublished.
[n] D. Bazyl, K. Floettmann, E. Vogel, and I. Zagorodnov, “Thermal study of a 2 Kelvin copper photocathode in a CW SRF gun cavity”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2132, unpublished.
[n] P. Greninger, “Bridge Coupler for APT”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD19, pp. 953-955.
[n] G. Romagnoli et al., “Engineering studies on collimators for CERN’s experimental areas”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR69, unpublished.
[n] P. A. Piminov et al., “VEPP-4M Electron Positron Collider Operation at High Energy”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 34-36. doi:10.18429/JACoW-RuPAC2021-TUA01
[n] A. Sauret et al., “Development of a pulsed magnet measurement bench using the stretched wire method”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 686-689. doi:10.18429/JACoW-IPAC2025-MOPS036
[n] M. Schaumann, M. Bieler, J. Keil, J. Klute, L. Liao, and R. Wanzenberg, “Temperature Effects on the PETRA III Tunnel Stability”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2432-2434. doi:10.18429/JACoW-IPAC2022-THPOST001
[n] J. Valladares, J. Bradley, L. Castellano, and T. Tajima, “CST simulation and RF power for an equivalent SCL cavity at LANSCE”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 404-406. doi:10.18429/JACoW-NAPAC2025-TUP025
[n] G. L. Wang, E. Prat, S. Reiche, and K. Schnorr, “Progress on Fresh-slice Multi-stage Amplification at SwissFEL”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH2A3, unpublished.
[n] V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
[n] S. Brooks, “Industrial manufacturing of nonlinear field permanent magnets for a constant tune medical FFA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB040, unpublished.
[n] M. P. Sangroula et al., “Optimization of the Hadron Ring Stripline Injection Kicker for the EIC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3073-3076. doi:10.18429/JACoW-IPAC2021-WEPAB193
[n] R. Frigot et al., “Production of “cocktail beams” with ECR booster, post-accelerated for industrial applications”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 60-63. doi:10.18429/JACoW-ECRIS2024-MOP13
[n] T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 72-77. doi:10.18429/JACoW-ECRIS2020-TUXZO03
[n] A. Wilson, S. Shrishrimal, M. Keenan, R. S. P. Chillara, E. Nkwocha, and F. Moguel, “LCLS-II cavity heater controls: design, operation, and accuracy”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 924-928. doi:10.18429/JACoW-ICALEPCS2025-WEMG005
[n] L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2821-2824. doi:10.18429/JACoW-IPAC2023-WEPA074
For LaTeX
Use Complete Form
For BibTeX
References
- X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB048, pp. 1075-1078.
- S. V. Furuseth and X. Buffat, “Loss of Transverse Landau Damping by Diffusion in High-Energy Hadron Colliders”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1286-1289.
- C. Phillips et al., “Experimental demonstration of a straight-merger beamline”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL053, pp. 3233-3235.
- O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
- J. Pham et al., “Standardizing MicroTCA integration into the TANGO control system via ChimeraTK and OPC UA at SOLEIL”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 724-728.
- A. E. Bondarchenko et al., “Production of Metal Ion Beams From ECR Ion Sources”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper WEXZO05, pp. 137-139.
- R. Ganter et al., “Overview of the Soft X-Ray Line Athos at SwissFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 125-128.
- R. Mamutov, G. Baranov, and A. Gerasev, “Real-time luminosity optimization in collider experiments using reinforcement learning”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS072, pp. 3115-3116.
- N. Mirian, “Optical Klystron Operation in the Terahertz Regime”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2090, this conference.
- M. J. Grabski and E. Al-Dmour, “Overview and Challenges of the Vacuum Systems of Diffraction Limited Storage Rings”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH4D1, unpublished.
- S. V. Furuseth and X. Buffat, “Change of Beam Distribution Due to Decoherence in the Presence of Transverse Feedback”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 281-284.
- M. Moscatello et al., “NEWGAIN project at GANIL-SPIRAL2 : design of the new heavy ion injector for the superconducting linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA193, pp. 1765-1767.
- A. Moutardier et al., “Injection Feedback for a Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2870-2873.
- A. Wilson, S. Shrishrimal, M. Keenan, R. S. P. Chillara, E. Nkwocha, and F. Moguel, “LCLS-II cavity heater controls: design, operation, and accuracy”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper WEPD009, unpublished.
- D. Bazyl, K. Floettmann, E. Vogel, and I. Zagorodnov, “Thermal study of a 2 Kelvin copper photocathode in a CW SRF gun cavity”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2132, this conference.
- P. Greninger, “Bridge Coupler for APT”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD19, pp. 953-955.
- G. Romagnoli et al., “Engineering studies on collimators for CERN’s experimental areas”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR69, unpublished.
- P. A. Piminov et al., “VEPP-4M Electron Positron Collider Operation at High Energy”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 34-36.
- A. Sauret et al., “Development of a pulsed magnet measurement bench using the stretched wire method”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS036, pp. 686-689.
- M. Schaumann, M. Bieler, J. Keil, J. Klute, L. Liao, and R. Wanzenberg, “Temperature Effects on the PETRA III Tunnel Stability”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2432-2434.
- J. Valladares, J. Bradley, L. Castellano, and T. Tajima, “CST simulation and RF power for an equivalent SCL cavity at LANSCE”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 404-406.
- G. L. Wang, E. Prat, S. Reiche, and K. Schnorr, “Progress on Fresh-slice Multi-stage Amplification at SwissFEL”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH2A3, unpublished.
- V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
- S. Brooks, “Industrial manufacturing of nonlinear field permanent magnets for a constant tune medical FFA”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB040, unpublished.
- M. P. Sangroula et al., “Optimization of the Hadron Ring Stripline Injection Kicker for the EIC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3073-3076.
- R. Frigot et al., “Production of “cocktail beams” with ECR booster, post-accelerated for industrial applications”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, pp. 60-63.
- T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUXZO03, pp. 72-77.
- A. Wilson, S. Shrishrimal, M. Keenan, R. S. P. Chillara, E. Nkwocha, and F. Moguel, “LCLS-II cavity heater controls: design, operation, and accuracy”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 924-928.
- L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA074, pp. 2821-2824.
Back to search