JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Sakashita, M. L. Friend, Y. Koshio, K. Nakayoshi, and S. Yamasu, “Upgrade of the Machine Protection System Toward 1.3 MW Operation of the J-PARC Neutrino Beamline”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 18-21. doi:10.18429/JACoW-IBIC2018-MOOB04
[n]	M. Xie, “Laser Acceleration with Open Waveguides”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA128, pp. 3678-3680. 
[n]	G. Lawler, J. Parsons, and J. Rosenzweig, “Cryogenic Testing Infrastucture at UCLA”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM098, unpublished. 
[n]	M. Xie, “Principle of Alternating-Gradient Acceleration”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A03, pp. 895-900. 
[n]	M. Xie, “Plasma Inverse Transition Acceleration”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH085, pp. 3876-3878. 
[n]	N. Tani, H. Hotchi, J. Kamiya, M. Kinsho, O. Takeda, and M. Yamamoto, “Alignment Plan and Survey Results of the Equipment for J-PARC 3 GeV RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME020, pp. 2971-2973. 
[n]	F. Plassard, D. Schulte, R. Tomas, and P. Bambade, “CLIC Beam Delivery System Rebaselining and Long L* Lattice Optimization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3500-3503. doi:10.18429/JACoW-IPAC2016-THPMR045
[n]	M. Kawase, M. Kinsho, O. Takeda, Y. Yamazaki, and M. Yoshimoto, “Reconstructions of the Control System for the Charge Exchange System at the 3GeV RCS in J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA060, pp. 214-216. 
[n]	F. Alessandria et al., “The TTF Cryosat Design Report”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93G05, pp. XX-XX. 
[n]	E. P. Gibbons, M. T. Heron, and N. P. Rees, “GDA and EPICS Working in Unison for Science Driven Data Acquisition and Control at Diamond Light Source”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAUST01, pp. 529-532. 
[n]	S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX. 
[n]	M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834. 
[n]	N. Rouviere, “RF Liners for High Brilliance Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP036G, pp. 1036-1038. 
[n]	F. Plassard, A. Latina, E. Marin, D. Schulte, R. Tomas, and P. Bambade, “Tuning-Based Design Optimization of CLIC Final Focus System at 3 TeV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 760-763. doi:10.18429/JACoW-IPAC2017-MOPIK099
[n]	N. Rouviere, “Undulator Vessels Devoid of Distributed Pumps”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP047L, pp. 2512-2514. 
[n]	G. Mazzitelli et al., “!CHAOS Status and Evolution”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 894-896. doi:10.18429/JACoW-IPAC2015-MOPHA046
[n]	Y. Hashimoto et al., “Development of a Beam Profile Monitor using Nitrogen-Molecular Jet for Intense Beams”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB73, pp. 511-514. 
[n]	W. F. Bergan, M. B. Andorf, M. P. Ehrlichman, V. Khachatryan, D. L. Rubin, and S. Wang, “Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 360-363. doi:10.18429/JACoW-IPAC2019-MOPGW100
[n]	T. Garvey et al., “ELYSE - An Intense Electron Linac for Pulsed Radiolysis Research”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THBLA003, pp. 254-256. 
[n]	M. Xie, “On Analog Simulation of Ionization Cooling of Muons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH086, pp. 3879-3881. 
[n]	G. Velev et al., “Field Quality of the LHC Inner Triplet Quadrupoles being Fabricated at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE015, pp. 1969-1971. 
[n]	J. J. Song, S. O. Brauer, Y. W. Kang, R. L. Kustom, and A. Nassiri, “HOM (Higher-Order Mode) Damper Tests of Advanced Photon Source Storage Ring Cavity with a 20 MeVe- Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1277-1280. 
[n]	F. Harfoush et al., “Design Considerations for a Large Aperture High Field Superconducting Dipole”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 527-530. 
[n]	W. F. Bergan, M. B. Andorf, M. P. Ehrlichman, V. Khachatryan, D. L. Rubin, and S. Wang, “Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 360-363. doi:10.18429/JACoW-IPAC2019-MOPGW100
[n]	J. Santander-Vela, L. Pivetta, and N. P. Rees, “Status of the Square Kilometre Array”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1982-1988. doi:10.18429/JACoW-ICALEPCS2017-FRAPL01
[n]	W. F. Bergan, V. Khachatryan, and D. L. Rubin, “Helical Wiggler Model for Fast Tracking”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3356-3359. doi:10.18429/JACoW-IPAC2019-WEPTS102
[n]	K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 559-562. 
[n]	S. Rimjaem, P. Boonpornprasert, J. Saisut, S. Suphakul, C. Thongbai, and S. Chunjarean, “Injector System for Linac-based Infrared Free-electron Laser in Thailand”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD32, pp. 441-444. 
[n]	H. G. Kirk et al., “Post-Irradiation Properties of Candidate Materials for High-Power Targets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAD003, pp. 333-335. 
[n]	O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 852-854. doi:10.18429/JACoW-IPAC2019-MOPTS007
[n]	R. M. Bodenstein, P. Burrows, J. Snuverink, and F. Plassard, “Intra-beam IP Feedback Studies for the 380 GeV CLIC Beam Delivery System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2683-2686. doi:10.18429/JACoW-IPAC2016-WEPOR009
[n]	M. Virgo et al., “Controls and Alignment for the University of Maryland Electron Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH169, pp. 1177-1179. 
[n]	C. Thongbai et al., “THz Radiation Sources based on RF-linac at Chiang Mai University”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD52, pp. 492-495. 
[n]	R. De Maria, R. Bruce, D. Gamba, M. Giovannozzi, and F. Plassard, “High Luminosity LHC Optics and Layout HLLHCV1.4”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 468-471. doi:10.18429/JACoW-IPAC2019-MOPMP019
[n]	S. I. Meigo et al., “Beam Commissioning of Spallation Neutron and Muon Source in J-PARC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP066, pp. 1439-1441. 
[n]	K. Nakayoshi, Y. Fujii, T. Nakadaira, and K. Sakashita, “Development of an Expert System for the High Intensity Neutrino Beam Facility at J-PARC”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 154-158. doi:10.18429/JACoW-IBIC2018-MOPC18
[n]	S. Seung, G. Andonian, M. A. Harrison, S. Wu, D. L. Bruhwiler, and T. V. Shaftan, “A User Friendly, Modular Simulation Tool for Laser-Electron Beam Interactions”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA17, pp. 213-215. 
[n]	F. Plassard, A. Latina, E. Marin, D. Schulte, R. Tomas, and P. Bambade, “Beam Delivery System Optimization for CLIC 380 GeV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 764-767. doi:10.18429/JACoW-IPAC2017-MOPIK100
[n]	P. Bosland et al., “Tests of the Low Beta Cavities and Cryomodules for the SPIRAL 2 LINAC”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO003, pp. 171-175. 
[n]	M. Xie, “A Fundamental Theorem on Particle Acceleration”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG017, pp. 1843-1845. 
[n]	N. P. Rees et al., “Developing HDF5 for the Synchrotron Community”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 845-848. doi:10.18429/JACoW-ICALEPCS2015-WEPGF063
[n]	A. Peach, F. Cacho-Nerin, J. Parker, and P. D. Quinn, “Engineering Challenges on the I14 Nanoprobe Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 398-402. doi:10.18429/JACoW-MEDSI2016-FRAA01
[n]	U. K. Pedersen, M. G. Abbott, M. T. Heron, N. P. Rees, and M. Rivers, “Developments in the Integration of Video Into EPICS on Diamond Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP009, pp. 688-690. 
[n]	J. M. Loiseaux, “How Could Operational Conditions and Beam Control Devices Make an Experiment Easier, Efficient and More Precise?”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper HI-02, pp. 737-744. 
[n]	Ph. Guimbal, P. Balleyguier, D. Deslandes, and H. Borrion, “A High Dynamic Range Beam Position Measurement System for ELSA-2”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT16, pp. XX-XX. 
[n]	M. Cargnelutti et al., “Design and Simulations of the Cavity BPM Readout Electronics for the ELI-NP Gamma Beam System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 264-266. doi:10.18429/JACoW-IPAC2016-MOPMR017
[n]	D. M. Dykes, T. Garvey, D. E. Poole, and B. Taylor, “SRS RF Cavity Windows”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2800-2803. 
[n]	L. H. Yu, Y. Hao, Y. Hidaka, F. Plassard, and V. V. Smaluk, “Convergence Map with Action-Angle Variables Based on Square Matrix for Nonlinear Lattice Optimization”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 182-185. doi:10.18429/JACoW-IPAC2021-MOPAB041
[n]	A. D. Parsons et al., “P99: An Optical Beamline for Offline Technique Development and Systems Integration for Prototype Beamline Instrumentation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 899. doi:10.18429/JACoW-ICALEPCS2019-WEBPP04
[n]	F. Bosco et al., “Wakefield studies for an ultra compact X-rays free electron laser”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS48, unpublished. 
[n]	D. Mascali and D. Santonocito, “Status and perspectives of the PANDORA experiment: investigating β-decays in magnetized plasmas”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper TUC1, unpublished. 
[n]	Y. Gómez-Martínez, F. Vezzu, T. Cabanel, J. Giraud, D. Marchand, and R. Micoud, “Last SPIRAL 2 10 kW CW RF Coupler Design”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP076, pp. 969-971. 
[n]	M. Xie, “Design Optimization for an X-Ray Free Electron Laser Driven by SLAC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG10, pp. 183-185. 
[n]	A. Fukasawa et al., “Beam transport and diagnostics for the space plasma experiment at Samurai”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA110, unpublished. 
[n]	D. Longuevergne et al., “RF and Cryogenic Tests of the First Beta 0.12 SPIRAL2 Cryomodule”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP009, pp. 792-794. 
[n]	J. Rosenzweig, T. Nicol, G. Jackson, and E. Colby, “Design of a High Duty Cycle, Asymmetric Emittance RF Photocathode Injector for Linear Collider Applications”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3021-3024. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search