Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Stoltz, J. R. Cary, P. Messmer, and C. Nieter, “Simulations Using the VORPAL Code of Electron Impact Ionization Effects in Waveguide Breakdown Processes”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT033, pp. 2298-2299.
[n] X. Xu et al., “Study on high energy coupling efficiency of laser-electron interaction via vortex beam”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 431-434. doi:10.18429/JACoW-IPAC2024-MOPG72
[n] R. L. Warnock, J. S. Berg, and E. Forest, “Fast Symplectic Mapping and Quasi-invariants for the Large Hadron Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAB06, pp. 2804-2806.
[n] J. P. Edelen, K. A. Brown, N. M. Cook, J. A. Einstein-Curtis, and V. Schoefer, “Neural Network Inverse Models for Implicit Optics Tuning in the AGS to RHIC Transfer Line”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 327-330. doi:10.18429/JACoW-IBIC2022-TUP39
[n] S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
[n] B. I. Bondarev, A. P. Durkin, Yu. D. Ivanov, I. V. Shumakov, and N. I. Uksusov, “RF Control System for Superconducting Proton Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH163, pp. 1163-1165.
[n] V. Kobets, “Modernization the Modulators Klystrons Accelerating Stand of the Electron Linear Accelerator LINAC-800”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB02, pp. 157-158.
[n] A. Gamelin and N. Yamamoto, “Equilibrium Bunch Density Distribution with Multiple Active and Passive RF Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 278-281. doi:10.18429/JACoW-IPAC2021-MOPAB069
[n] N. Pichoff et al., “Contributors to AIRIX Focal Spot Size”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH107, pp. 2164-2166.
[n] S. Krylov et al., “Results of Start of the 150 kV Magnetic Pulse Compressor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP4, pp. 1485-1487.
[n] R. Kibbee, E. Prebys, and V. Nagaslaev, “Study of the beam losses and the radiation levels in the electrostatic septum for slow extraction at 8 GeV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2491-2494. doi:10.18429/JACoW-IPAC2023-TUPM117
[n] J. Y. Xu and H. S. Xu, “Longitudinal Dynamics with Harmonic Cavities under the Over-stretching Conditions”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1939-1941. doi:10.18429/JACoW-IPAC2021-TUPAB220
[n] Y. Kim, C. Kim, and W.-K. Lau, “Report on the hands-on training with the ELEGANT code at ISBA24”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS126, unpublished.
[n] Y. C. Chae and G. Decker, “Advanced Photon Source Insertion Device Field Quality and Multipole Error Specification”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR24, pp. 3409-3411.
[n] M. D. Dutour, “Software Factory Techniques Applied to Process Control at CERN”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA03, pp. 87-89.
[n] B. P. Murin et al., “The New Concepts in Designing the CW High-current Linacs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR07, pp. 1134-1136.
[n] R. E. Laxdal et al., “Characterization of SRF Materials at the TRIUMF muSR Facility”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB050, pp. 205-209.
[n] G. M. Liu, Z. M. Dai, and Z. T. Zhao, “Lattice Optimization for the SSRF Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14020, pp. XX-XX.
[n] F. Bourg et al., “Electron Cyclotron Resonance Sources of Multiply Charged Ions: Last Developments at Grenoble”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2997-3000.
[n] M. Dayyani Kelisani, S. Doebert, and H. Shaker, “Design and Beamloading-Simulations of a Pre-Bunching Cavity for the CLIC Drive Beam Injector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP028, pp. 895-897.
[n] T. Pugnat et al., “Study of the Performance of the CERN Proton Synchrotron Internal Dump”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 555-558. doi:10.18429/JACoW-HB2023-THBP36
[n] R. Alemany-Fernandez et al., “Performance of the Low Energy Ion Ring at CERN with lead ions in 2022”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1648-1651. doi:10.18429/JACoW-IPAC2023-TUPA151
[n] S. Funkner et al., “Reconstructing wake functions using Haissinski distributions from multiple bunch charges”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2419-2422. doi:10.18429/JACoW-IPAC2025-WEPS102
[n] S. Kwon et al., “High Beam Current Operation with Beam Diagnostics at LIPAc”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 649-655. doi:10.18429/JACoW-HB2023-FRC1I2
[n] Y. A. Yucesan, “Machine Learning for Improved Accelerator Health and Reliability”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper THXD1, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Stoltz, J. R. Cary, P. Messmer, and C. Nieter, “Simulations Using the VORPAL Code of Electron Impact Ionization Effects in Waveguide Breakdown Processes”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT033, pp. 2298-2299.
- X. Xu et al., “Study on high energy coupling efficiency of laser-electron interaction via vortex beam”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG72, pp. 431-434.
- R. L. Warnock, J. S. Berg, and E. Forest, “Fast Symplectic Mapping and Quasi-invariants for the Large Hadron Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAB06, pp. 2804-2806.
- J. P. Edelen, K. A. Brown, N. M. Cook, J. A. Einstein-Curtis, and V. Schoefer, “Neural Network Inverse Models for Implicit Optics Tuning in the AGS to RHIC Transfer Line”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 327-330.
- S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
- B. I. Bondarev, A. P. Durkin, Yu. D. Ivanov, I. V. Shumakov, and N. I. Uksusov, “RF Control System for Superconducting Proton Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH163, pp. 1163-1165.
- V. Kobets, “Modernization the Modulators Klystrons Accelerating Stand of the Electron Linear Accelerator LINAC-800”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB02, pp. 157-158.
- A. Gamelin and N. Yamamoto, “Equilibrium Bunch Density Distribution with Multiple Active and Passive RF Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 278-281.
- N. Pichoff et al., “Contributors to AIRIX Focal Spot Size”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH107, pp. 2164-2166.
- S. Krylov et al., “Results of Start of the 150 kV Magnetic Pulse Compressor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP4, pp. 1485-1487.
- R. Kibbee, E. Prebys, and V. Nagaslaev, “Study of the beam losses and the radiation levels in the electrostatic septum for slow extraction at 8 GeV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM117, pp. 2491-2494.
- J. Y. Xu and H. S. Xu, “Longitudinal Dynamics with Harmonic Cavities under the Over-stretching Conditions”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1939-1941.
- Y. Kim, C. Kim, and W.-K. Lau, “Report on the hands-on training with the ELEGANT code at ISBA24”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS126, unpublished.
- Y. C. Chae and G. Decker, “Advanced Photon Source Insertion Device Field Quality and Multipole Error Specification”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR24, pp. 3409-3411.
- M. D. Dutour, “Software Factory Techniques Applied to Process Control at CERN”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA03, pp. 87-89.
- B. P. Murin et al., “The New Concepts in Designing the CW High-current Linacs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR07, pp. 1134-1136.
- R. E. Laxdal et al., “Characterization of SRF Materials at the TRIUMF muSR Facility”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB050, pp. 205-209.
- G. M. Liu, Z. M. Dai, and Z. T. Zhao, “Lattice Optimization for the SSRF Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14020, pp. XX-XX.
- F. Bourg et al., “Electron Cyclotron Resonance Sources of Multiply Charged Ions: Last Developments at Grenoble”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2997-3000.
- M. Dayyani Kelisani, S. Doebert, and H. Shaker, “Design and Beamloading-Simulations of a Pre-Bunching Cavity for the CLIC Drive Beam Injector”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP028, pp. 895-897.
- T. Pugnat et al., “Study of the Performance of the CERN Proton Synchrotron Internal Dump”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP36, pp. 555-558.
- R. Alemany-Fernandez et al., “Performance of the Low Energy Ion Ring at CERN with lead ions in 2022”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA151, pp. 1648-1651.
- S. Funkner et al., “Reconstructing wake functions using Haissinski distributions from multiple bunch charges”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS102, pp. 2419-2422.
- S. Kwon et al., “High Beam Current Operation with Beam Diagnostics at LIPAc”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper FRC1I2, pp. 649-655.
- Y. A. Yucesan, “Machine Learning for Improved Accelerator Health and Reliability”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper THXD1, unpublished.
Back to search