Favourites
For Word
[n] B. Militsyn, “Injection System of 4GLS Light Source”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 21, pp. 15-18.
[n] J. Griffin and F. Marti, “Third Harmonic Central Region for the K500-K800 Superconducting Cyclotrons”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B08, pp. 48-51.
[n] N. Hubert, B. B?®ranger, and L. S. Nadolski, “BPM Data Correction at SOLEIL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD21, pp. 684-686.
[n] J. Y. Zhai et al., “IHEP Low-loss Large Grain 9-cell Cavity Fabrication and Processing”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC039, pp. 2974-2976.
[n] J. T. Keane, “Experiments on RF Field Patterns in the BNL Linac”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-4, pp. 398-406.
[n] A. S. Thakur, G. Burt, W. L. Millar, I. Syratchev, and Z. Un Nisa, “Design of an RF-gridded gun for a high-efficiency tristron”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7192, unpublished.
[n] S. Kuzikov, “Simple Theory of Thermal Fatigue Caused by RF Pulse Heating”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP65, pp. 168-170.
[n] G. Rumolo, J. B. Jeanneret, Y. Papaphilippou, and D. Quatraro, “Collective Effects in the CLIC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP049, pp. 658-660.
[n] P. Bricault, M. Dombsky, A. Dowling, and P. Schmor, “High Power Targets for ISOL Radioactive Ion Beam Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD003, pp. 439-443.
[n] E. Pozdeyev et al., “FRIB Front End Construction and Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 58-62. doi:10.18429/JACoW-IPAC2018-MOZGBF1
[n] M.-H. Chun et al., “Design Study on a High Power RF Amplifier for the RFQ”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3009-3011. doi:10.18429/JACoW-IPAC2015-WEPMN036
[n] V. Zubko, I. Bogdanov, S. Kozub, P. A. Shcherbakov, L. S. Shirshov, and L. Tkachenko, “Study of Electrodynamic and Thermodynamic Mechanisms Influencing Stability of Superconducting Rutherford Cable”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC007, pp. 337-339.
[n] I. Podadera Aliseda et al., “A Diagnostics Plate for the IFMIF-EVEDA Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC083, pp. 1248-1250.
[n] J. Claus and H. Foelsche, “Extraction for ISABELLE”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3065-3068.
[n] J. Y. Zhai et al., “IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP073, pp. 305-307.
[n] R. Malone, I. Ben-Zvi, X. J. Wang, and V. Yakimenko, “BNL Accelerator Test Facility Control System Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH005, pp. 776-778.
[n] L. Blumberg, A. Luccio, A. G. Ruggiero, and A. van Steenbergen, “Comparison of Synchrotron and Accumulator Scenarios for a 5-MW Pulsed Spallation Neutron Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP012G, pp. 533-535.
[n] J.-L. Vay, R. Lehe, H. Vincenti, B. B. Godfrey, I. Haber, and P. Lee, “High-performance Modeling of Plasma-based Acceleration Using the Full PIC Method”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 31-36. doi:10.18429/JACoW-ICAP2015-TUBJI2
[n] M. Bahte, F. C. Herrmann, and P. Schm??ser, “Magnetization and Susceptibility Measurements on Niobium Samples for Cavity Production”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D10, pp. 881-889.
[n] H. Hirakawa, “Electromagnetic Field of Traveling Charge in Beam Duct”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-11, pp. 400-408.
[n] G. U. Behrsing, D. J. Clark, E. H. Hoyer, C. W. Leemann, F. Voelker, and R. B. Yourd, “Cyclotron Design Studies for a Medical Ion Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-05, pp. 2061-2064.
[n] J. S. Chai, Y. S. Kim, D. H. Lee, J. D. Lee, and S. Y. Yoo, “Operation Experience of KCCH Cyclotron for 10 years and Prospect of Cyclotron in Korea”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper J-05, pp. 508-511.
[n] D. Bafia, A. Grassellino, O. S. Melnychuk, A. S. Romanenko, Z-H. Sung, and J. Zasadzinski, “Gradients of 50 MV/m in TESLA Shaped Cavities via Modified Low Temperature Bake”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 586-591. doi:10.18429/JACoW-SRF2019-TUP061
[n] Z. Q. Li et al., “Design of the SSR021 Cavity for the Proton Accelerator Main Linac of China ADS”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP021, pp. 939-941.
[n] Yu. Karshev, Yu. Fedotov, V. Komarov, and I. Lobov, “User-Friendly Interface for Operator in the Controls of UNK Beam-Transfer Line.”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR11, pp. 2259-2261.
[n] D. P. Missiaen et al., “Geometry of the LHC Short Straight Sections Before Installation in the Tunnel: Resulting Aperture, Axis and BPM Positioning”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN077, pp. 335-337.
[n] J. M. Brennan et al., “RF Beam Control System for the Brookhaven Relativistic Heavy Ion Collider, RHIC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02G, pp. 1705-1707.
[n] M. Garten et al., “Optimizing plasma-downramp profiles and beam transport for emittance preservation in multi-stage plasma accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR47, unpublished.
[n] J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 758-761. doi:10.18429/JACoW-NAPAC2016-WEPOA30
For LaTeX
Use Complete Form
For BibTeX
References
- B. Militsyn, “Injection System of 4GLS Light Source”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 21, pp. 15-18.
- J. Griffin and F. Marti, “Third Harmonic Central Region for the K500-K800 Superconducting Cyclotrons”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B08, pp. 48-51.
- N. Hubert, B. B?®ranger, and L. S. Nadolski, “BPM Data Correction at SOLEIL”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD21, pp. 684-686.
- J. Y. Zhai et al., “IHEP Low-loss Large Grain 9-cell Cavity Fabrication and Processing”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC039, pp. 2974-2976.
- J. T. Keane, “Experiments on RF Field Patterns in the BNL Linac”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART4-4, pp. 398-406.
- A. S. Thakur, G. Burt, W. L. Millar, I. Syratchev, and Z. Un Nisa, “Design of an RF-gridded gun for a high-efficiency tristron”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7192, this conference.
- S. Kuzikov, “Simple Theory of Thermal Fatigue Caused by RF Pulse Heating”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP65, pp. 168-170.
- G. Rumolo, J. B. Jeanneret, Y. Papaphilippou, and D. Quatraro, “Collective Effects in the CLIC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP049, pp. 658-660.
- P. Bricault, M. Dombsky, A. Dowling, and P. Schmor, “High Power Targets for ISOL Radioactive Ion Beam Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAD003, pp. 439-443.
- E. Pozdeyev et al., “FRIB Front End Construction and Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 58-62.
- M.-H. Chun et al., “Design Study on a High Power RF Amplifier for the RFQ”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3009-3011.
- V. Zubko, I. Bogdanov, S. Kozub, P. A. Shcherbakov, L. S. Shirshov, and L. Tkachenko, “Study of Electrodynamic and Thermodynamic Mechanisms Influencing Stability of Superconducting Rutherford Cable”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC007, pp. 337-339.
- I. Podadera Aliseda et al., “A Diagnostics Plate for the IFMIF-EVEDA Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC083, pp. 1248-1250.
- J. Claus and H. Foelsche, “Extraction for ISABELLE”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3065-3068.
- J. Y. Zhai et al., “IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP073, pp. 305-307.
- R. Malone, I. Ben-Zvi, X. J. Wang, and V. Yakimenko, “BNL Accelerator Test Facility Control System Upgrade”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH005, pp. 776-778.
- L. Blumberg, A. Luccio, A. G. Ruggiero, and A. van Steenbergen, “Comparison of Synchrotron and Accumulator Scenarios for a 5-MW Pulsed Spallation Neutron Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP012G, pp. 533-535.
- J.-L. Vay, R. Lehe, H. Vincenti, B. B. Godfrey, I. Haber, and P. Lee, “High-performance Modeling of Plasma-based Acceleration Using the Full PIC Method”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 31-36.
- M. Bahte, F. C. Herrmann, and P. Schm??ser, “Magnetization and Susceptibility Measurements on Niobium Samples for Cavity Production”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D10, pp. 881-889.
- H. Hirakawa, “Electromagnetic Field of Traveling Charge in Beam Duct”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper E-11, pp. 400-408.
- G. U. Behrsing, D. J. Clark, E. H. Hoyer, C. W. Leemann, F. Voelker, and R. B. Yourd, “Cyclotron Design Studies for a Medical Ion Accelerator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-05, pp. 2061-2064.
- J. S. Chai, Y. S. Kim, D. H. Lee, J. D. Lee, and S. Y. Yoo, “Operation Experience of KCCH Cyclotron for 10 years and Prospect of Cyclotron in Korea”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper J-05, pp. 508-511.
- D. Bafia, A. Grassellino, O. S. Melnychuk, A. S. Romanenko, Z-H. Sung, and J. Zasadzinski, “Gradients of 50 MV/m in TESLA Shaped Cavities via Modified Low Temperature Bake”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 586-591.
- Z. Q. Li et al., “Design of the SSR021 Cavity for the Proton Accelerator Main Linac of China ADS”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP021, pp. 939-941.
- Yu. Karshev, Yu. Fedotov, V. Komarov, and I. Lobov, “User-Friendly Interface for Operator in the Controls of UNK Beam-Transfer Line.”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR11, pp. 2259-2261.
- D. P. Missiaen et al., “Geometry of the LHC Short Straight Sections Before Installation in the Tunnel: Resulting Aperture, Axis and BPM Positioning”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN077, pp. 335-337.
- J. M. Brennan et al., “RF Beam Control System for the Brookhaven Relativistic Heavy Ion Collider, RHIC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP02G, pp. 1705-1707.
- M. Garten et al., “Optimizing plasma-downramp profiles and beam transport for emittance preservation in multi-stage plasma accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR47, unpublished.
- J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 758-761.
Back to search