Favourites
For Word
[n] M. Brosi, A. Andersson, J. Breunlin, F. Cullinan, and P. Tavares, “Time-resolved measurement and simulation of a longitudinal single-bunch instability at the MAX IV 3 GeV ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2685-2688. doi:10.18429/JACoW-IPAC2023-WEPA020
[n] P. H. Williams, G. J. Hirst, B. D. Muratori, H. L. Owen, and S. L. Smith, “Electron Beam Dynamics in 4GLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN083, pp. 1103-1105.
[n] A. Pisent, “European collaboration for the realization of ESS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5199-5204. doi:10.18429/JACoW-IPAC2023-FRYG1
[n] Y. Yuan, J. Wang, J. Yang, K. Fan, and Z. Liu, “Russian quadruplet based electron optics for ultrafast electron microscopy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3582-3585. doi:10.18429/JACoW-IPAC2023-WEPL193
[n] J. X. Chen et al., “Application of Remote Installation and Measurement Smart Vehicle in Accelerator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 217-219. doi:10.18429/JACoW-MEDSI2018-WEPH08
[n] M. Campbell, “Timepix and Medipix detectors and their applications”, presented at the IPAC'23, Venice, Italy, May 2023, paper FRXG2, unpublished.
[n] A. Gora, M. Abo-Bakr, M. Dirsat, G. Rehm, and M. Ries, “Beam-based characterization of a non-linear injection kicker at BESSY II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1156-1158. doi:10.18429/JACoW-IPAC2023-MOPM075
[n] C. Matejcek, “5 MeV Beam Transport System for MESA”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA020, unpublished.
[n] A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 299. doi:10.18429/JACoW-MEDSI2020-WEPB16
[n] J. Wang, G. Hoffstaetter, and D. Sagan, “Beam-based alignment of individual members of sextupole families”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4036-4039. doi:10.18429/JACoW-IPAC2023-THPA038
[n] M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
[n] H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
[n] Y. Cai, M. Furman, and M. Pivi, “Buildup of Electron Cloud with Different Bunch Pattern in the Presence of Solenoid Field”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAA004, pp. 350-352.
[n] J.-C. Chang, J.-R. Chen, Y.-C. Lin, Y.-H. Liu, and Z.-D. Tsai, “Design of the Utility System for the 3 GeV TPS Electron Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS137, pp. 1828-1830.
[n] Y. Wang et al., “Experimental Study of Stainless Steel Vacuum Chamber with TiN Film Coating”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP023, pp. 401-403.
[n] M. Zisman, “R&D Toward Neutrino Factories and Muon Colliders”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAA007, pp. 361-365.
[n] R. Bodenstein et al., “Current status of conceptual horizontal splitter design for FFA@CEBAF energy Upgrade”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 810-813. doi:10.18429/JACoW-IPAC2025-MOPS126
[n] G.-Y. Hsiung, C. K. Chan, C.-H. Chang, J.-R. Chen, H. P. Hsueh, and T. L. Yang, “Design Concept of the Vacuum System for the 3 GeV Taiwan Photon Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS064, pp. 3433-3435.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Brosi, A. Andersson, J. Breunlin, F. Cullinan, and P. Tavares, “Time-resolved measurement and simulation of a longitudinal single-bunch instability at the MAX IV 3 GeV ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA020, pp. 2685-2688.
- P. H. Williams, G. J. Hirst, B. D. Muratori, H. L. Owen, and S. L. Smith, “Electron Beam Dynamics in 4GLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN083, pp. 1103-1105.
- A. Pisent, “European collaboration for the realization of ESS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper FRYG1, pp. 5199-5204.
- Y. Yuan, J. Wang, J. Yang, K. Fan, and Z. Liu, “Russian quadruplet based electron optics for ultrafast electron microscopy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL193, pp. 3582-3585.
- J. X. Chen et al., “Application of Remote Installation and Measurement Smart Vehicle in Accelerator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 217-219.
- M. Campbell, “Timepix and Medipix detectors and their applications”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper FRXG2, unpublished.
- A. Gora, M. Abo-Bakr, M. Dirsat, G. Rehm, and M. Ries, “Beam-based characterization of a non-linear injection kicker at BESSY II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM075, pp. 1156-1158.
- C. Matejcek, “5 MeV Beam Transport System for MESA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA020, unpublished.
- A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 299.
- J. Wang, G. Hoffstaetter, and D. Sagan, “Beam-based alignment of individual members of sextupole families”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA038, pp. 4036-4039.
- M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
- H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
- Y. Cai, M. Furman, and M. Pivi, “Buildup of Electron Cloud with Different Bunch Pattern in the Presence of Solenoid Field”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAA004, pp. 350-352.
- J.-C. Chang, J.-R. Chen, Y.-C. Lin, Y.-H. Liu, and Z.-D. Tsai, “Design of the Utility System for the 3 GeV TPS Electron Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS137, pp. 1828-1830.
- Y. Wang et al., “Experimental Study of Stainless Steel Vacuum Chamber with TiN Film Coating”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP023, pp. 401-403.
- M. Zisman, “R&D Toward Neutrino Factories and Muon Colliders”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAA007, pp. 361-365.
- R. Bodenstein et al., “Current status of conceptual horizontal splitter design for FFA@CEBAF energy Upgrade”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS126, pp. 810-813.
- G.-Y. Hsiung, C. K. Chan, C.-H. Chang, J.-R. Chen, H. P. Hsueh, and T. L. Yang, “Design Concept of the Vacuum System for the 3 GeV Taiwan Photon Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS064, pp. 3433-3435.
Back to search