JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. M. Huang et al., “Design Optimization of the 166-MHz and 500-MHz Fundamental Power Couplers for Superconducting RF Cavities at High Energy Photon Source”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 544. doi:10.18429/JACoW-SRF2021-WEPFAV005
[n]	L. Ives et al., “10 MW, 91 GHz Gyroklystron for High Freqency Accelerator Research”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE018, pp. 1119-1121. 
[n]	J. Y. Tang et al., “Preliminary Accelerator Design of a Circular Higgs Factory in China”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA03, pp. 523-525. 
[n]	L. Ives, T. Bui, D. Datta, M. Shephard, and W. Vogler, “Development of 3D Finite-Element Charged-Particle Code with Adaptive Meshing”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG054, pp. 3560-3562. 
[n]	G. Marotta, C. Baffa, G. Brajnik, M. Colciago, E. Giani, and I. Novak, “Strategy and Tools to Test Software in the SKA Project: The CSP. LMC Case”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 34-39. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO03
[n]	K. R. Shin, A. E. Fathy, and Y. W. Kang, “Double-Gap Rebuncher Cavity Design of SNS MEBT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP069, pp. 3898-3900. 
[n]	X. Wu et al., “The Design and Commissioning of the Accelerator System of the Rare Isotope Reaccelerator - ReA3 at Michigan State University”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO1B05, pp. 269-273. 
[n]	M. T. Crofford, X. Geng, T. W. Hardek, and T. L. Davidson, “The Spallation Neutron Source Eight-Channel Pulsed Power Meter”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP300, pp. 684-686. 
[n]	R. Jiang, J. Chen, and Y. B. Leng, “High-Accuracy Diagnostic Tool for Beam Position Monitor Troubleshooting in SSRF Based on Clustering Analysis”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 166-169. doi:10.18429/JACoW-IBIC2020-WEPP28
[n]	L. Ives et al., “Development of Improved Cathodes for High Power RF Sources”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE016, pp. 1113-1115. 
[n]	Ph. Lebrun, O. Pagano, T. M. Taylor, and L. Walckiers, “Operational Experience with the LEP Low-Beta Superconducting Quadrupoles”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1641-1644. 
[n]	P. Zisopoulos, F. Antoniou, Y. Papaphilippou, E. Hertle, and A.-S. Mueller, “Transverse Tunes Determination from Mixed BPM Data”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1709-1712. doi:10.18429/JACoW-IPAC2015-TUPJE042
[n]	M. T. Crofford et al., “Spallation Neutron Source Proton Power Upgrade Low-Level RF Control System Development”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3363-3366. doi:10.18429/JACoW-IPAC2021-WEPAB299
[n]	W. Lawson et al., “The Design of a High Power Gyroklystron for Supercollider Applications”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1904-1907. 
[n]	J. Neilson, L. Ives, and S. G. Tantawi, “Development of a Multi-Megawatt Circulator for X-Band”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE021, pp. 1127-1127. 
[n]	M. Sch??tt, M. A. Obermayer, U. Ratzinger, and A. Schnase, “Development and Measurements of a 325 MHz RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 578-580. doi:10.18429/JACoW-LINAC2016-TUPLR053
[n]	J. R. Delayen, C. L. Bohn, W. L. Kennedy, B. J. Micklich, C. T. Roche, and L. Sagalovsky, “Development of High-Current Superconducting Accelerators at Argonne National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93A02, pp. XX-XX. 
[n]	A. Caproni and E. Schmid, “The Integrated Alarm System of the Alma Observatory”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 81-87. doi:10.18429/JACoW-ICALEPCS2017-MOCPL07
[n]	U. van Rienen, C. R. Bahls, J. Heller, and D. Zheng, “First Steps Towards a New Finite Element Solver for MOEVE PIC Tracking”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 260-264. doi:10.18429/JACoW-ICAP2018-TUPAG02
[n]	Y. Wang, “20 MeV Electron Linear Accelerator in Nanjing University”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 264-267. 
[n]	G. Papotti, T. Bohl, F. Follin, and U. Wehrle, “Longitudinal Beam Measurements at the LHC: The LHC Beam Quality Monitor”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ022, pp. 1852-1854. 
[n]	T. Henss et al., “Hard - and Software of the ATLAS Pixel Detector Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_016. 
[n]	M.-S. Chiu et al., “Optimization and Measurements on the Double Mini-Betay Lattice in the TPS Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1567-1569. doi:10.18429/JACoW-IPAC2019-TUPGW071
[n]	A. I. Ivanenko, J. Pivarc, and K. D. Tumanov, “Some Aspects of Construction of ECR Ion Source Vacuum Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2523-2526. 
[n]	D. Wu et al., “Beam Longitudinal  Distribution Reconstructed by GESPAR Method at CAEP THz FEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2602-2604. doi:10.18429/JACoW-IPAC2019-WEPGW055
[n]	J. Neilson, L. Ives, and S. G. Tantawi, “Design and Test of a 100MW X-Band TE01 Window”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE020, pp. 1125-1126. 
[n]	W. D. Cornelius et al., “The SAIC PET Isotope Tracer Accelerator Facility”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-35, pp. 139-141. 
[n]	H. Tanaka, T. Hara, T. Inagaki, T. Ishikawa, and T. Watanabe, “Green-oriented upgrade of accelerator complex at the SPring-8 campus”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2590-2593. doi:10.18429/JACoW-IPAC2023-WEOGA3
[n]	T. Shintake et al., “Progress on the C-Band Accelerator for the SPring-8 Compact SASE Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA009, pp. 487-491. 
[n]	S. Veseli, “PvaPy: Python API for EPICS PV Access”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 970-973. doi:10.18429/JACoW-ICALEPCS2015-WEPGF116
[n]	M. Grieser, S. T. Artikova, K. Blaum, F. Laux, and J. Ullrich, “Beam Current Measurements at the TSR Heidelberg”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC082, pp. 1195-1197. 
[n]	C. H. Chen et al., “Frequency Map Measurements at the TPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3240-3243. doi:10.18429/JACoW-IPAC2019-WEPTS053
[n]	A. Osanai and M. Tanigaki, “Development of Data-logging System for FFAG Accelerator Complex in KURRI”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP016, pp. 116-118. 
[n]	M. Huyse et al., “A Radioactive Ion Beam Facility at Louvain-La-Neuve”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1491-1494. 
[n]	B. Faatz, Y. Li, J. Pflueger, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Study of Controllable Polarization SASE FEL by a Crossed-planar Undulator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC118, pp. 2282-2284. 
[n]	E. Ciapala et al., “Commissioning of the 400 MHz LHC RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP124, pp. 847-849. 
[n]	P. Zhang et al., “Development and Vertical Tests of a 166.6-MHz Proof-of-Principle Superconduting Beta = 1 Quarter-Wave Cavity for HEPS”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEOCAV02, pp.. 
[n]	G. A. Krafft, A. S. Hofler, K. L. Mahoney, P. K. Kloeppel, B. A. Bowling, and C. S. Higgins, “Performance of the CEBAF Arc Beam Position Monitors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2298-2301. 
[n]	J. Pivarc and A. Tikhomirov, “Some Remarks to One Self - Neutralization Model of Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH103, pp. 1909-1911. 
[n]	L. Pavlov, L. Anthony, I. Kalagin, S. Mitrofanov, M. Sakieldien, and V. Semin, “Multichannel system for measuring the phase of acceleration and other parameters of beams in a cyclotron”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS093, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search