JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. W. Owen, C. A. Radmer, and D. E. Young, “RF Perturbation Measurements in Long Linac Cavities”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 286-290. 
[n]	M. Doleans et al., “Plasma Processing to Improve the Performance of the SNS Superconducting Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 679-682. doi:10.18429/JACoW-LINAC2016-WE2A03
[n]	J. D. Mammosser et al., “SRF Quality Assurance Studies and Their Application to Cryomodule Repairs at SNS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB112, pp. 428-432. 
[n]	W. C. Sellyey and R. W. Kruse, “Operational Amplifier Based Stretcher for Stripline Beam Position Moniters”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1145-1148. 
[n]	J. D. Gilpatrick et al., “Low Energy Demonstration Accelerator (LEDA) Beam Instrumentation: RFQ-Accelerated Beam Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA150, pp. 2214-2216. 
[n]	C. G. R. Geddes et al., “Stable Electron Beams with Low Absolute Energy Spread from a Laser Wakefield Accelerator with Plasma Density Ramp Controlled Injection”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBKI01, pp. 1916-1918. 
[n]	B. G. Chidley and G. E. Lee-Whiting, “Space Charge Forces in a Linac Buncher”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 207-210. 
[n]	X. K. Maruyama, S. Penner, and P. Sprangle, “Analysis of Free Electron Laser Performance Utilizing the National Bureau of Standards' CW Microtron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 205-209. 
[n]	J. Karn, B. Dunham, and M. Tiefenback, “Operational Monitoring of the CEBAF RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR15, pp. 2271-2272. 
[n]	S. Gorgi Zadeh, R. Calaga, T. Flisgen, and U. van Rienen, “HOM Damping Options for the Z-Pole Operating Scenario of FCC-ee”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 590-593. doi:10.18429/JACoW-IPAC2019-MOPRB006
[n]	T. Baer, R. Tomas, J. Tuckmantel, J. Wenninger, F. Zimmermann, and R. Calaga, “LHC Machine Protection against Very Fast Crab Cavity Failures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ009, pp. 1816-1818. 
[n]	S. Gorgi Zadeh, R. Calaga, T. Flisgen, and U. van Rienen, “HOM Damping Options for the Z-Pole Operating Scenario of FCC-ee”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 590-593. doi:10.18429/JACoW-IPAC2019-MOPRB006
[n]	W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320. 
[n]	P. Lotrus and G. A. Durand, “Saclay GBAR Command Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC040, pp. 650-653. 
[n]	S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz, 550 kW Pulsed Klystron for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE019, pp. 1122-1124. 
[n]	L. R. Ives et al., “200 kW CW, 350 MHz Multiple Beam Inductive Output Tube”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO08, pp. 946-947. 
[n]	I. Ashkenazi, J. A. Fugitt, J. C. Hovater, G. E. Lahti, K. L. Mahoney, and S. N. Simrock, “Calibration and Operation Schemes for CEBAF RF Control”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU462, pp. 480-483. 
[n]	I. Ashkenazi and G. E. Lahti, “Microprocessor Control for CEBAF RF Control Module”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1861-1864. 
[n]	M. M. Maggiore et al., “SCENT300, A Superconducting Cyclotron For Hadrontherapy”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP123, pp. 1812-1814. 
[n]	B. Yee-Rendon, Y. Kondo, J. Tamura, and F. Maekawa, “Beam transient studies for the JAEA-ADS LEBT”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 488-491. doi:10.18429/JACoW-LINAC2024-TUPB076
[n]	M. Jensen et al., “Testing of the ESS MB-IOT Prototypes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1759-1764. doi:10.18429/JACoW-IPAC2018-WEXGBF1
[n]	I. E. Campisi et al., “CEBAF Upgrade Cryomodule Component Testing in the Horizontal Test Bed (HTB)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH152, pp. 1137-1139. 
[n]	V. Veshcherevich, S. A. Belomestnykh, W.-D. Moller, P. Quigley, J. J. Reilly, and J. Sears, “High Power Tests of First Input Couplers for Cornell ERL Injector Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS013, pp. 2355-2357. 
[n]	W. Blokland and C. C. Peters, “A New Differential and Errant Beam Current Monitor for the SNS Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper THAL2, pp. 921-924. 
[n]	J. Karn, G. Biallas, A. Guerra, and L. Harwood, “Magnetic Measurements of the Prototype Dipole for the IR-FEL at the Thomas Jefferson National Accelerator Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P045, pp. 3333-3335. 
[n]	J. R. Neighbours, F. R. Buskirk, and X. K. Maruyama, “Threshold Cerenkov Radiation and Beam Diagnostics”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 655-658. 
[n]	V. G. Kurakin, “Thermal Instabilities in Superconducting RF Cavities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2080-2083. 
[n]	J. Tamura et al., “Present Status of the Spoke Cavity Prototyping for the JAEA-ADS Linac”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 612. doi:10.18429/JACoW-SRF2021-WEPCAV011
[n]	C. Toth et al., “Colliding Pulse Injection Experiments in Non-Collinear Geometry for Controlled Laser Plasma Wakefield Acceleration of Electrons”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN112, pp. 2975-2977. 
[n]	A. Zaltsman et al., “Design, Construction, System Integration, and Test Results of the 1 MW CW RF System for the E-Gun Cavity in the Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP080, pp. 1014-1016. 
[n]	M. Eriksson and L.-J. Lindgren, “The 500 MHz Cavity for the MAX II Synchrotron Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2083-2086. 
[n]	J. Tamura et al., “Current Status of the Spoke Cavity Prototyping for the JAEA-ADS Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 180-183. doi:10.18429/JACoW-LINAC2022-MOPOGE14
[n]	B. Yee-Rendon, Y. Kondo, F. Maekawa, S. I. Meigo, and J. Tamura, “Progress on SRF Linac Development for the Accelerator-Driven Subcritical System at JAEA”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 372. doi:10.18429/JACoW-SRF2021-TUPFAV001
[n]	X. K. Maruyama, F. R. Buskirk, and J. R. Neighbours, “Electron Beam Bunch Profile Determination through Cerenkov Radiation”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1994-1997. 
[n]	G. Biallas, D. Douglas, J. Karn, and K. Tremblay, “Magnetic Measurement of the PI Bend Dipole Magnets for the IR-FEL at the Thomas Jefferson National Accelerator Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP147, pp. 3312-3314. 
[n]	B. Bonin and M. Juillard, “Progress in RF Superconductivity at Saclay”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2045-2048. 
[n]	W. Mondelaers, “Operational Experience with the Low Energy 2% Duty Factor Ghent Electron Linac”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 526-529. 
[n]	E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339. 
[n]	C. C. Peters, T. B. Southern, W. Blokland, and T. A. Justice, “Minimizing Errant Beam at the Spallation Neutron Source”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 491-498. doi:10.18429/JACoW-IBIC2017-TH2AB1
[n]	E. L. Wright et al., “Test Results for a 10-MW, L-band, Multiple-beam Klystron for TESLA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF077, pp. 1117-1119. 
[n]	S. Lenci and E. Eisen, “Large Scale Production of 805-MHz Pulsed Klystrons for SNS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF076, pp. 1114-1116. 
[n]	A-M. Valente et al., “Production and Performance of the CEBAF Upgrade Cryomodule Intermediate Prototypes”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF072, pp. 1105-1107. 
[n]	S. Lenci, H. Bohlen, A. Mizuhara, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE118, pp. 2326-2328. 
[n]	W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2769-2772. 
[n]	S. Lenci and E. L. Eisen, “Large Scale Production of 805-MHz Pulsed Klystrons for the Spallation Neutron Source Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT032, pp. 2230-2232. 
[n]	S. Passarello et al., “Electrostatic Deflectors: New Design for High Intensity Beam Extraction”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE011, pp. 1245-1247. 
[n]	W. C. Sellyey and J. D. Gilpatrick, “A Compact Residual Gas Ionization Profile Monitor (RGIPM) System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA122, pp. 2152-2154. 
[n]	G. E. Lee-Whiting, “Linac Cavity Field Calculations”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-8, pp. 533-536. 
[n]	A. Navitski, E. Elsen, V. Myronenko, J. Schaffran, O. Turkot, and Y. Tamashevich, “Characterization of Surface Defects on EXFEL Series and ILC-Higrade Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB072, pp. 281-285. 
[n]	J. Paridaens, M. Dorikens, L. Dorikens-Vanpraet, W. Mondelaers, and D. Segers, “Production of a Slow Positron Beam at the 90 MeV Linac of the Ghent University”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 715-718. 
[n]	C. Joly et al., “MTCA.4-Based LLRF System Prototype Status for MYRRHA”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 771-774. doi:10.18429/JACoW-LINAC2022-THPOPA14
[n]	J. Tamura et al., “Fabrication progress of the prototype spoke cavity for the JAEA-ADS linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1588-1590. doi:10.18429/JACoW-IPAC2023-TUPA120
[n]	R. B. Fiorito, D. W. Rule, X. K. Maruyama, T. Fasanello, M. A. Piestrup, and H. Rietdyk, “A Method for Measuring Dark Current Electron Beams in an RF Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2397-2400. 
[n]	G. E. Lee-Whiting and J. H. Ormrod, “Longitudinal Space-Charge Effects in Bunchers”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-4, pp. 346-352. 
[n]	G. E. Lee-Whiting, “Analysis of Equivalent Circuits for Linac Tanks”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-3, pp. 471-474. 
[n]	S. Gorgi Zadeh, O. Brunner, F. Peauger, and I. Syratchev, “Optimization of a 600 MHz Two-Cell Slotted Waveguide Elliptical Cavity for FCC-ee”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1323-1326. doi:10.18429/JACoW-IPAC2022-TUPOTK048
[n]	J. Tamura et al., “Progress of the spoke cavity prototyping for the JAEA-ADS linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 496-498. doi:10.18429/JACoW-LINAC2024-TUPB078
[n]	M. Liepe et al., “CW RF Systems of the Cornell ERL Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP034, pp. 857-859. 
[n]	W. Mondelaers, “The Ghent State University Linear Electron Accelerator Facilities: Status and Perspectives”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2619-2622. 
[n]	Y. Kondo et al., “Development of Single-spoke Cavities for  ADS at JAEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 947-951. doi:10.18429/JACoW-SRF2023-THCAA01
[n]	D. Panasenko, “Control, Stability and Staging in Laser Wakefield Accelerators”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TU302, pp. 379-379. 
[n]	A. Gatera et al., “Minerva (MYRRHA Phase 1) RFQ Beam Commissioning”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 675-678. doi:10.18429/JACoW-IPAC2021-MOPAB205
[n]	B. Yee-Rendón, Y. Kondo, F. Maekawa, S. I. Meigo, and J. Tamura, “Status of the JAEA-ADS Superconducting LINAC Design”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 30-34. doi:10.18429/JACoW-HB2021-MOP04
[n]	B. Yee-Rendon, F. Maekawa, J. Tamura, and Y. Kondo, “Design and optimization of a proton source extraction system for the JAEA-ADS linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1591-1593. doi:10.18429/JACoW-IPAC2023-TUPA121
[n]	W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (Rgipm)”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS02, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search