Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Ha, M. E. Conde, and J. G. Power, “Arbitrary Transverse Profile Shaping using Transverse Wigglers”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 403-406. doi:10.18429/JACoW-NAPAC2019-TUPLM15
[n] J.-S. Oh et al., “Development of an Ultra Stable Klystron-Modulator for PAL XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP047, pp. XX-XX.
[n] A. H. Lumpkin, W. Berg, J. C. Dooling, K. P. Wootton, and C. Yao, “Proposed Enhanced Imaging Station in the 6-GeV Booster-to-Storage Ring Transport Line for APS Upgrade”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 583-586. doi:10.18429/JACoW-NAPAC2019-TUPLE11
[n] C. Liu, C. Montag, H. Witte, J. Berg, and K. Drees, “Design and simulation of EIC IR orbit control system”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL009, unpublished.
[n] D. F. Sutter, B. L. Beaudoin, and L. Dovlatyan, “Off Axis Dependence of Current Dependent Coherent Tune Shifts in the UMER Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 422-425. doi:10.18429/JACoW-NAPAC2019-TUPLM22
[n] S. Prodon, C. Bertone, M. Guinchard, and P. Minginette, “Handling and Transport of Oversized Accelerator Components and Physics Detectors”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH184, pp. 3230-3232.
[n] E. Schneidmiller and M. V. Yurkov, “Baseline Parameters of the European XFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 109-112. doi:10.18429/JACoW-FEL2017-MOP033
[n] E. Felcini et al., “Beam Optics Studies for a Novel Gantry for Hadrontherapy”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2962-2965. doi:10.18429/JACoW-IPAC2022-THPOMS011
[n] M. Sangroula et al., “Beam-induced heating and thermal analysis for the EIC HSR cryogenic helical magnet and BPM assembly”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6348, unpublished.
[n] F. Gerigk et al., “Status of the LINAC4 Project at CERN”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP007, pp. 64-66.
[n] R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
[n] L. Falbo, E. Bressi, S. Foglio, and C. Priano, “Betatron Core Slow Extraction at CNAO”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1237-1239. doi:10.18429/JACoW-IPAC2018-TUZGBF3
[n] I. S. Ko et al., “BEAM DIAGNOSTICS WITH A STREAK CAMERA IN PLS STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP048, pp. XX-XX.
[n] E. Laface, C. G. Maiano, P. Pierini, and M. Y. Wang, “Tuning of Superconducting Cavities Using the FFT of Transmitted Power”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1268-1270. doi:10.18429/JACoW-IPAC2022-TUPOTK028
[n] S. Yue, M. Aiba, Y. Dutheil, G. Favia, T. Kramer, and J. Ruf, “On-axis injection with multipole injection kicker in FCC-ee”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1078, unpublished.
[n] Y. Morita et al., “Vertical Cold Test of the Crab Cavity with a Co-axial Beam Pipe”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR015, pp. XX-XX.
[n] Q. Wu, Y. Luo, Z. Li, S. De Silva, and B. Xiao, “EIC crab cavity multipole effects on dynamic aperture”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 626-629. doi:10.18429/JACoW-IPAC2023-MOPL041
For LaTeX
Use Complete Form
For BibTeX
References
- G. Ha, M. E. Conde, and J. G. Power, “Arbitrary Transverse Profile Shaping using Transverse Wigglers”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 403-406.
- J.-S. Oh et al., “Development of an Ultra Stable Klystron-Modulator for PAL XFEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP047, pp. XX-XX.
- A. H. Lumpkin, W. Berg, J. C. Dooling, K. P. Wootton, and C. Yao, “Proposed Enhanced Imaging Station in the 6-GeV Booster-to-Storage Ring Transport Line for APS Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 583-586.
- C. Liu, C. Montag, H. Witte, J. Berg, and K. Drees, “Design and simulation of EIC IR orbit control system”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL009, unpublished.
- D. F. Sutter, B. L. Beaudoin, and L. Dovlatyan, “Off Axis Dependence of Current Dependent Coherent Tune Shifts in the UMER Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 422-425.
- S. Prodon, C. Bertone, M. Guinchard, and P. Minginette, “Handling and Transport of Oversized Accelerator Components and Physics Detectors”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH184, pp. 3230-3232.
- E. Schneidmiller and M. V. Yurkov, “Baseline Parameters of the European XFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 109-112.
- E. Felcini et al., “Beam Optics Studies for a Novel Gantry for Hadrontherapy”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2962-2965.
- M. Sangroula et al., “Beam-induced heating and thermal analysis for the EIC HSR cryogenic helical magnet and BPM assembly”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6348, this conference.
- F. Gerigk et al., “Status of the LINAC4 Project at CERN”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP007, pp. 64-66.
- R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
- L. Falbo, E. Bressi, S. Foglio, and C. Priano, “Betatron Core Slow Extraction at CNAO”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1237-1239.
- I. S. Ko et al., “BEAM DIAGNOSTICS WITH A STREAK CAMERA IN PLS STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP048, pp. XX-XX.
- E. Laface, C. G. Maiano, P. Pierini, and M. Y. Wang, “Tuning of Superconducting Cavities Using the FFT of Transmitted Power”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1268-1270.
- S. Yue, M. Aiba, Y. Dutheil, G. Favia, T. Kramer, and J. Ruf, “On-axis injection with multipole injection kicker in FCC-ee”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1078, this conference.
- Y. Morita et al., “Vertical Cold Test of the Crab Cavity with a Co-axial Beam Pipe”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR015, pp. XX-XX.
- Q. Wu, Y. Luo, Z. Li, S. De Silva, and B. Xiao, “EIC crab cavity multipole effects on dynamic aperture”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL041, pp. 626-629.
Back to search
