Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Cantono, T. Ceccotti, L. Fedeli, and A. Macchi, “2019 APS DPB Outstanding Doctoral Thesis Award - Relativistic Plasmonics in High Intensity Laser-Solid Interactions”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THAHC1, unpublished.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] R. Lambiase, “Overview of the Power Conversion Systems for the RHIC Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP004G, pp. 2311-2313.
[n] R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
[n] C. Zhang et al., “A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1740-1743. doi:10.18429/JACoW-IPAC2023-TUPA184
[n] D. Dunning et al., “The UK XFEL conceptual design and options analysis: mid-term update”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 400-403. doi:10.18429/JACoW-IPAC2024-MOPG55
[n] G. Arduini et al., “Overview of LEP Operation in 1998”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP22, pp. 2996-2998.
[n] J. J. Ko et al., “X-ray Pinhole Camera in the Diagnostics Beamlime BL7B at PLS-II”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 519-522. doi:10.18429/JACoW-IBIC2018-WEPC17
[n] S. Nemesure et al., “Improved Alarm Tracking for Better Accountability”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP249, pp. 579-581.
[n] R. Veness, B. Goddard, L. Massidda, S. J. Mathot, and A. Presland, “Design of the LHC Beam Dump Entrance Window”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS123, pp. 1792-1794.
[n] B. Skoczen and J. Kulka, “Non-destructive Testing of Bus-bar Joints Powering LHC Superconducting Magnets, by Using Gamma Sources”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF021, pp. 1642-1644.
[n] H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
[n] J. David Schneider, “Operation of the Low-Energy Demonstration Accelerator: The Proton Injector for APT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCL2, pp. 503-507.
[n] R. D?Âlling, “Diagnostics of the PROSCAN beam lines”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM25, pp. XX-XX.
[n] A. Baartman and D. Kaltchev, “Runge-Kutta DA Integrator in Mathematica Language”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN004, pp. 3226-3228.
[n] M. T. F. Pivi et al., “Status of the Carbon Commissioning and Roadmap Projects of the MedAustron Ion Therapy Center Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3404-3407. doi:10.18429/JACoW-IPAC2019-THXXPLS1
[n] R. Assmann, J. B. Jeanneret, and D. Kaltchev, “STATUS OF ROBUSTNESS STUDIES FOR THE LHC COLLIMATION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAU05, pp. XX-XX.
[n] L. R. Evans and J. Gareyte, “Beam-Beam and Single Beam Effects in the SPS Proton-Antiproton Collider”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2397-2400.
[n] J. Chen and D. Zu, “Study on TESLA Cavity Shape”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1095-1098.
[n] D. L. Judd, “Session I Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A02, pp. 4-6.
[n] J. B. Kim, I. S. Ko, and H. Suk, “Reengineering and Refactoring Large-scale Scientific Programs with the Unified Process: A Case Study with OSIRIS PIC Program”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT085, pp. 2697-2699.
[n] X. Qiu, “Picosecond-Resolution `Slice' Emittance Measurement of Electron Bunches”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7C001, pp. 1971-1975.
[n] A. Asner, R. Holsinger, and C. Iselin, “The Computation of Poleface Winding Systems Yielding Independent Multipole Fields within the Aperture of Notably Alternating Gradient Synchrotron Magnets”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 703-708.
[n] M. V. Fazio and F. E. Brandeberry, “CW RF Operation of the FMIT RFQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2840-2843.
[n] B. Spaniol and W. C. Heraeus GmbH, “quot;Oligo-crystalinquot; Niobium / Large Grain Niobium Discs, Directly Cut from Ingot”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH163, pp. 0-3645.
[n] A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 233-237.
[n] B. Di Girolamo, Ju. Boudagov, M. V. Lyablin, and S. Vlachos, “The Precision Laser Inclinometer”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3305-3308. doi:10.18429/JACoW-IPAC2021-WEPAB281
[n] J. Ching et al., “Operation Experience and Performance Statistics of TLS at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP35G, pp. 608-610.
[n] M. Peiniger, H. Vogel, R. Fleck, D. Kiehlmann, and D. Dasbach, “Industrial Fabrication of Superconducting Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1080-1083.
[n] E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
[n] S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
[n] S. Lenci and E. L. Eisen, “Large Scale Production of 805-MHz Pulsed Klystrons for the Spallation Neutron Source Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT032, pp. 2230-2232.
[n] B. Feinberg, G. U. Behrsing, K. Halbach, J. S. Marks, M. E. Morrison, and D. H. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 375-378.
[n] M. Johnson, A. Brynes, J. Jones, M. King, and A. Wolski, “Transverse Phase Space Tomography at CLARA Using Generative Machine Learning”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6092, unpublished.
[n] R. Ruo et al., “H- Beam Dynamics Study of a LEBT in XiPAF Project with the WARP PIC Code”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 449-452. doi:10.18429/JACoW-HB2016-WEPM5Y01
[n] W. Namkung, S. J. Park, M. H. Cho, J. S. Oh, and J. S. Bak, “2.856-GHz Modulation of Conventional Triode Electron Gun”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB18, pp. 137-139.
[n] I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 329-332. doi:10.18429/JACoW-ICALEPCS1991-S08NC11
[n] N. Gambino et al., “Impact of Ion Source Stability for a Medical Accelerator”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 5-9. doi:10.18429/JACoW-ECRIS2018-MOB2
[n] G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
[n] L. David et al., “Evluation of a Linux Based Control System for Ganil”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP567, pp. XX-XX.
[n] T. Li, “Beam modulation effect under the Influence of dual RF system”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5676, unpublished.
[n] K. S. Smith, P. Thieberger, D. B. Steski, and M. J. Zarcone, “Further Development with Heavy Ion Sources at Brookhaven National Laboratory's Tandem Van de Graaff Facility”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3178-3181.
[n] H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1469-1471. doi:10.18429/JACoW-IPAC2017-TUPAB064
[n] R. E. Worsham, T. Enegren, D. Dohan, L. Durieu, and R. Poirier, “System for Flat-topping the RF Voltage at TRIUMF”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J07, pp. 360-363.
[n] V. P. Nagaslaev et al., “Third Integer Resonance Slow Extraction Scheme for a mu->e Experiment at Fermilab”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD40, pp. 153-155.
[n] A. Ng et al., “Expanding Motion Architecture Using Ethercat in the Australian Synchrotron”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper TUMBCMO33, unpublished.
[n] A. Presland, B. Goddard, J. M. Jimenez, D. R. Ramos, and R. Veness, “A Large Diameter Entrance Window for the LHC Beam Dump Line”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE020, pp. 1698-1700.
[n] E. H. Hoyer, N. Mokhov, and W. C. Turner, “Absorbers for the High Luminosity Insertions of the LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP13C, pp. 368-370.
[n] J. T. M. Lyles, S. Archuletta, J. Davis, L. Lopez, and G. Roybal, “Test Results for the New 201.25 MHz Tetrode Power Amplifier at LANSCE”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF058, pp. 1078-1080.
[n] S.-R. Huh, D. S. Chang, C. K. Hwang, J.-T. Jin, S. K. Lee, and B. H. Oh, “Present Status of the Daejeon Ion Accelerator Complex at KAERI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1482-1484. doi:10.18429/JACoW-ICALEPCS2017-THPHA051
[n] R. A. Tennant, “Accelerator Vibration Issues”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2868-2870.
[n] A. Presland, B. Goddard, and W. J. M. Weterings, “The Performance of the New TCDQ System in the LHC Beam Dumping Region”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP013, pp. 1324-1326.
[n] S. Myalski et al., “Status of the Carbon Ion Source Commissioning at MedAustron”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 71-74. doi:10.18429/JACoW-ECRIS2018-TUP01
[n] D. Kaltchev, R. V. Servranckx, M. K. Craddock, and W. Joho, “Lattice Studies for a High-Brightness Light Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAB14, pp. 2823-2825.
[n] J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2236-2239.
[n] S. H. Nam et al., “Performance Characteristics of the Pulsed High Power Klystron Tube for PLS 2 GeV Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 593-596.
[n] I. Ben-Zvi et al., “Ampere Average Current Photoinjector and Energy Recovery Linac”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOC04, pp. XX-XX.
[n] W. Namkung, I. S. Ko, M. H. Cho, J. S. Bak, J. Choi, and H. S. Lee, “Operation of PLS 2-GeV Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA06, pp. 1061-1063.
[n] A. Leiva Genre et al., “High-Frequency THz Generation and Compact High-Gradient THz-Driven Accelerator with Tapered Parallel-Plate Waveguide.”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3011, unpublished.
[n] L. P. Yang, S.-Y. Liu, and L. Z. Wang, “Upgrading the BEPC Control System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 82-84. doi:10.18429/JACoW-ICALEPCS1991-S02SRU07
[n] H. Nissen and S. Grau, “Why Should You Invest in Asset Management? A Fire and Gas Use Case”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1042. doi:10.18429/JACoW-ICALEPCS2019-WEMPR004
[n] D. L. Friesel, B. M. Bardin, R. E. Pollock, and J. W. D. Sinclair, “Field Mapping of the IUCF 200 MeV Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1887-1891.
[n] V. G. Kurakin, “Complex Shunt Impedance and Beam-RF Cavity Interaction”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA18, pp. 77-79.
[n] Z. Li, J. Wu, K. Gu, S. LU, and X. Qiu, “Design and development of turn-by-turn and bunch-by-bunch high-speed 128-channel data acquisition electronics applied to the HIAF facility”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper MOPCO25, unpublished.
[n] L. Shirshov et al., “STABILITY STUDY OF HIGH-CURRENT SUPERCONDUCTING CABLES FOR ACCELERATOR MAGNETS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH02, pp. XX-XX.
[n] A. Sinn et al., “Efficient simulation of multistage plasma accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1533-1536. doi:10.18429/JACoW-IPAC2023-TUPA093
[n] A. Costa et al., “Big Data Architectures for Logging and Monitoring Large Scale Telescope Arrays”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 267. doi:10.18429/JACoW-ICALEPCS2019-MOPHA032
[n] S. Adam and W. Joho, “Setting Up the SIN 590 MeV Ring Cyclotron for Single Turn Extraction”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-14, pp. 2358-2361.
[n] T. W. Hardek and F. E. Brandeberry, “Intense Pulsed Neutron Source (IPNS-I) Accelerator RF System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3021-3024.
[n] M. Blaskiewicz, L. Ahrens, and H. Calvani, “Anomalous, Intensity Dependent Losses in Au(32+) Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W002, pp. 959-961.
[n] W. Br?ñutigam, H. Beuscher, H.-G. Mathews, J. Reich, and P. Wucherer, “ECR-Sources and Multiharmonic Mode Operation at Julic”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B29, pp. 122-125.
[n] A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL186, unpublished.
[n] R. Keyser, J. P. Koutchouk, R. C. B. Parker, J. Pett, and P. Wolstenholme, “Plans for the LEP Control System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3182-3185.
[n] Y. Wang, W. Fan, J. Li, Q. Zhang, and Z. Zhao, “Preliminary study on the collective effects in the storage ring‑based coherent light source”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5667, unpublished.
[n] A. Gerbershagen et al., “Establishment of the new particle therapy Research Center (PARTREC) at UMCG Groningen”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM080, unpublished.
[n] F. Kuehteubl et al., “Investigating alternative extraction methods at MedAustron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2419-2422. doi:10.18429/JACoW-IPAC2023-TUPM091
[n] J. A. MacLachlan and J. Griffin, “Application of a New Scheme for Passing through Transition Energy to the Fermilab Main RIng and Main Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2826-2829.
[n] C. E. Mitchell et al., “ImpactX Modeling of Benchmark Tests for Space Charge Validation”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 583-586. doi:10.18429/JACoW-HB2023-THBP44
[n] I. M. Vladisavlevici, D. Vizman, and E. d, “Theoretical Study of Laser Energy Absorption Towards Energetic Proton and Electron Sources”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1737-1740. doi:10.18429/JACoW-IPAC2022-WEPOST021
[n] T. Li, X. Deng, Z. Liu, and L. Yan, “Investigation and diagnostic potential of off-axis resonance in THz Free-Electron Lasers”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2686, unpublished.
[n] J.-P. G. Tock, D. Bozzini, F. Laurent, S. Russenschuck, and B. Skoczen, “Electro-mechanical Aspects of the Interconnection of the LHC Superconducting Corrector Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF022, pp. 1645-1647.
[n] F. Marti, J. Griffin, and V. Taivassalo, “Design of the Axial Injection System for the NSCL Cyclotrons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2450-2453.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Cantono, T. Ceccotti, L. Fedeli, and A. Macchi, “2019 APS DPB Outstanding Doctoral Thesis Award - Relativistic Plasmonics in High Intensity Laser-Solid Interactions”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THAHC1, unpublished.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- R. Lambiase, “Overview of the Power Conversion Systems for the RHIC Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP004G, pp. 2311-2313.
- R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
- C. Zhang et al., “A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA184, pp. 1740-1743.
- D. Dunning et al., “The UK XFEL conceptual design and options analysis: mid-term update”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG55, pp. 400-403.
- G. Arduini et al., “Overview of LEP Operation in 1998”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP22, pp. 2996-2998.
- J. J. Ko et al., “X-ray Pinhole Camera in the Diagnostics Beamlime BL7B at PLS-II”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 519-522.
- S. Nemesure et al., “Improved Alarm Tracking for Better Accountability”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP249, pp. 579-581.
- R. Veness, B. Goddard, L. Massidda, S. J. Mathot, and A. Presland, “Design of the LHC Beam Dump Entrance Window”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS123, pp. 1792-1794.
- B. Skoczen and J. Kulka, “Non-destructive Testing of Bus-bar Joints Powering LHC Superconducting Magnets, by Using Gamma Sources”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF021, pp. 1642-1644.
- H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
- J. David Schneider, “Operation of the Low-Energy Demonstration Accelerator: The Proton Injector for APT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCL2, pp. 503-507.
- R. D?Âlling, “Diagnostics of the PROSCAN beam lines”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM25, pp. XX-XX.
- A. Baartman and D. Kaltchev, “Runge-Kutta DA Integrator in Mathematica Language”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN004, pp. 3226-3228.
- M. T. F. Pivi et al., “Status of the Carbon Commissioning and Roadmap Projects of the MedAustron Ion Therapy Center Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3404-3407.
- R. Assmann, J. B. Jeanneret, and D. Kaltchev, “STATUS OF ROBUSTNESS STUDIES FOR THE LHC COLLIMATION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEAU05, pp. XX-XX.
- L. R. Evans and J. Gareyte, “Beam-Beam and Single Beam Effects in the SPS Proton-Antiproton Collider”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2397-2400.
- J. Chen and D. Zu, “Study on TESLA Cavity Shape”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1095-1098.
- D. L. Judd, “Session I Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A02, pp. 4-6.
- J. B. Kim, I. S. Ko, and H. Suk, “Reengineering and Refactoring Large-scale Scientific Programs with the Unified Process: A Case Study with OSIRIS PIC Program”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT085, pp. 2697-2699.
- X. Qiu, “Picosecond-Resolution `Slice' Emittance Measurement of Electron Bunches”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7C001, pp. 1971-1975.
- A. Asner, R. Holsinger, and C. Iselin, “The Computation of Poleface Winding Systems Yielding Independent Multipole Fields within the Aperture of Notably Alternating Gradient Synchrotron Magnets”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 703-708.
- M. V. Fazio and F. E. Brandeberry, “CW RF Operation of the FMIT RFQ”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2840-2843.
- B. Spaniol and W. C. Heraeus GmbH, “quot;Oligo-crystalinquot; Niobium / Large Grain Niobium Discs, Directly Cut from Ingot”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH163, pp. 0-3645.
- A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 233-237.
- B. Di Girolamo, Ju. Boudagov, M. V. Lyablin, and S. Vlachos, “The Precision Laser Inclinometer”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3305-3308.
- J. Ching et al., “Operation Experience and Performance Statistics of TLS at SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP35G, pp. 608-610.
- M. Peiniger, H. Vogel, R. Fleck, D. Kiehlmann, and D. Dasbach, “Industrial Fabrication of Superconducting Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1080-1083.
- E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
- S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
- S. Lenci and E. L. Eisen, “Large Scale Production of 805-MHz Pulsed Klystrons for the Spallation Neutron Source Project”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT032, pp. 2230-2232.
- B. Feinberg, G. U. Behrsing, K. Halbach, J. S. Marks, M. E. Morrison, and D. H. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 375-378.
- M. Johnson, A. Brynes, J. Jones, M. King, and A. Wolski, “Transverse Phase Space Tomography at CLARA Using Generative Machine Learning”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6092, this conference.
- R. Ruo et al., “H- Beam Dynamics Study of a LEBT in XiPAF Project with the WARP PIC Code”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 449-452.
- W. Namkung, S. J. Park, M. H. Cho, J. S. Oh, and J. S. Bak, “2.856-GHz Modulation of Conventional Triode Electron Gun”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB18, pp. 137-139.
- I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC11, pp. 329-332.
- N. Gambino et al., “Impact of Ion Source Stability for a Medical Accelerator”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 5-9.
- G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
- L. David et al., “Evluation of a Linux Based Control System for Ganil”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP567, pp. XX-XX.
- T. Li, “Beam modulation effect under the Influence of dual RF system”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5676, this conference.
- K. S. Smith, P. Thieberger, D. B. Steski, and M. J. Zarcone, “Further Development with Heavy Ion Sources at Brookhaven National Laboratory's Tandem Van de Graaff Facility”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3178-3181.
- H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1469-1471.
- R. E. Worsham, T. Enegren, D. Dohan, L. Durieu, and R. Poirier, “System for Flat-topping the RF Voltage at TRIUMF”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J07, pp. 360-363.
- V. P. Nagaslaev et al., “Third Integer Resonance Slow Extraction Scheme for a mu->e Experiment at Fermilab”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD40, pp. 153-155.
- A. Ng et al., “Expanding Motion Architecture Using Ethercat in the Australian Synchrotron”, presented at the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUMBCMO33, unpublished.
- A. Presland, B. Goddard, J. M. Jimenez, D. R. Ramos, and R. Veness, “A Large Diameter Entrance Window for the LHC Beam Dump Line”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE020, pp. 1698-1700.
- E. H. Hoyer, N. Mokhov, and W. C. Turner, “Absorbers for the High Luminosity Insertions of the LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP13C, pp. 368-370.
- J. T. M. Lyles, S. Archuletta, J. Davis, L. Lopez, and G. Roybal, “Test Results for the New 201.25 MHz Tetrode Power Amplifier at LANSCE”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF058, pp. 1078-1080.
- S.-R. Huh, D. S. Chang, C. K. Hwang, J.-T. Jin, S. K. Lee, and B. H. Oh, “Present Status of the Daejeon Ion Accelerator Complex at KAERI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1482-1484.
- R. A. Tennant, “Accelerator Vibration Issues”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2868-2870.
- A. Presland, B. Goddard, and W. J. M. Weterings, “The Performance of the New TCDQ System in the LHC Beam Dumping Region”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP013, pp. 1324-1326.
- S. Myalski et al., “Status of the Carbon Ion Source Commissioning at MedAustron”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 71-74.
- D. Kaltchev, R. V. Servranckx, M. K. Craddock, and W. Joho, “Lattice Studies for a High-Brightness Light Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAB14, pp. 2823-2825.
- J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2236-2239.
- S. H. Nam et al., “Performance Characteristics of the Pulsed High Power Klystron Tube for PLS 2 GeV Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 593-596.
- I. Ben-Zvi et al., “Ampere Average Current Photoinjector and Energy Recovery Linac”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOC04, pp. XX-XX.
- W. Namkung, I. S. Ko, M. H. Cho, J. S. Bak, J. Choi, and H. S. Lee, “Operation of PLS 2-GeV Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA06, pp. 1061-1063.
- A. Leiva Genre et al., “High-Frequency THz Generation and Compact High-Gradient THz-Driven Accelerator with Tapered Parallel-Plate Waveguide.”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3011, this conference.
- L. P. Yang, S.-Y. Liu, and L. Z. Wang, “Upgrading the BEPC Control System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S02SRU07, pp. 82-84.
- H. Nissen and S. Grau, “Why Should You Invest in Asset Management? A Fire and Gas Use Case”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1042.
- D. L. Friesel, B. M. Bardin, R. E. Pollock, and J. W. D. Sinclair, “Field Mapping of the IUCF 200 MeV Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1887-1891.
- V. G. Kurakin, “Complex Shunt Impedance and Beam-RF Cavity Interaction”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA18, pp. 77-79.
- Z. Li, J. Wu, K. Gu, S. LU, and X. Qiu, “Design and development of turn-by-turn and bunch-by-bunch high-speed 128-channel data acquisition electronics applied to the HIAF facility”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper MOPCO25, unpublished.
- L. Shirshov et al., “STABILITY STUDY OF HIGH-CURRENT SUPERCONDUCTING CABLES FOR ACCELERATOR MAGNETS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH02, pp. XX-XX.
- A. Sinn et al., “Efficient simulation of multistage plasma accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA093, pp. 1533-1536.
- A. Costa et al., “Big Data Architectures for Logging and Monitoring Large Scale Telescope Arrays”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 267.
- S. Adam and W. Joho, “Setting Up the SIN 590 MeV Ring Cyclotron for Single Turn Extraction”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-14, pp. 2358-2361.
- T. W. Hardek and F. E. Brandeberry, “Intense Pulsed Neutron Source (IPNS-I) Accelerator RF System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3021-3024.
- M. Blaskiewicz, L. Ahrens, and H. Calvani, “Anomalous, Intensity Dependent Losses in Au(32+) Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W002, pp. 959-961.
- W. Br?ñutigam, H. Beuscher, H.-G. Mathews, J. Reich, and P. Wucherer, “ECR-Sources and Multiharmonic Mode Operation at Julic”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B29, pp. 122-125.
- A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL186, unpublished.
- R. Keyser, J. P. Koutchouk, R. C. B. Parker, J. Pett, and P. Wolstenholme, “Plans for the LEP Control System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3182-3185.
- Y. Wang, W. Fan, J. Li, Q. Zhang, and Z. Zhao, “Preliminary study on the collective effects in the storage ring‑based coherent light source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5667, this conference.
- A. Gerbershagen et al., “Establishment of the new particle therapy Research Center (PARTREC) at UMCG Groningen”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM080, unpublished.
- F. Kuehteubl et al., “Investigating alternative extraction methods at MedAustron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM091, pp. 2419-2422.
- J. A. MacLachlan and J. Griffin, “Application of a New Scheme for Passing through Transition Energy to the Fermilab Main RIng and Main Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2826-2829.
- C. E. Mitchell et al., “ImpactX Modeling of Benchmark Tests for Space Charge Validation”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP44, pp. 583-586.
- I. M. Vladisavlevici, D. Vizman, and E. d, “Theoretical Study of Laser Energy Absorption Towards Energetic Proton and Electron Sources”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1737-1740.
- T. Li, X. Deng, Z. Liu, and L. Yan, “Investigation and diagnostic potential of off-axis resonance in THz Free-Electron Lasers”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2686, this conference.
- J.-P. G. Tock, D. Bozzini, F. Laurent, S. Russenschuck, and B. Skoczen, “Electro-mechanical Aspects of the Interconnection of the LHC Superconducting Corrector Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF022, pp. 1645-1647.
- F. Marti, J. Griffin, and V. Taivassalo, “Design of the Axial Injection System for the NSCL Cyclotrons”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2450-2453.
Back to search