Favourites
For Word
[n] R. Husain, R. Fielder, I. Martin, P. Burrows, and S. Wang, “Studies for single bunch and multi-bunch beam instabilities in the Diamond-II booster”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1246-1249. doi:10.18429/JACoW-IPAC2024-TUPG18
[n] W. Venturini Delsolaro et al., “Performance of the Superconducting Corrector Magnet Circuits during the Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD028, pp. 2470-2472.
[n] Y. Arakita et al., “The KEK Booster to Main Ring Beam Transfer System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1464-1467.
[n] Y. Kim, H. Kitamura, H. Matsumoto, T. Shintake, and K. Sawada, “Beam Parameter Optimization for the Phase-1 Stage of the SPring-8 Compact SASE Source (SCSS) Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI117, pp. 808-810.
[n] J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
[n] R. Nathawat, A. K. Kumar, and Y. K. Vijay, “Morphological Changes of Electron-beam Irradiated PMMA Surface”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN019, pp. 2745-2747.
[n] E. Syresin and V. P. Volnyh, “GEANT-4 Simulations of Secondary Positron Emitted Carbon Ion Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC065, pp. 4202-4204.
[n] A. M. Lombardi et al., “End-to-end beam dynamics for CERN Linac4”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAY02, pp. 79-83.
[n] S. Schreiber, “Performance Status of the RF-gun based Injector of the TESLA Test Facility Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF203, pp. 309-311.
[n] A. Devred et al., “Time Decay Measurements of the Sextupole Component of the Magnetic Field in a 4-cm Aperture, 17-m-long SSC Dipole Magnet Prototype”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2480-2483.
[n] D. R. Swenson, D. Tupa, R. York, and O. B. van Dyck, “Optical Pumping of the Polarized H- ion Source at LAMPF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1931-1934.
[n] S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n] C. Mangeot, “Nanopositioning and Actuation in Extreme Environment Using Piezoelectric Multilayer Actuators and Motors”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4519-4521. doi:10.18429/JACoW-IPAC2017-THPVA039
[n] C. Ekdahl et al., “First Commissioning Experiments at DARHT-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT159, pp. 1497-1499.
[n] C. H. Kuo et al., “Fast Orbit Feeback System Upgrade with New Digital Bpm and Power Supply in the Tls”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC17, pp. 346-348.
[n] J. Chavanne, C. Penel, and P. Van Vaerenbergh, “Construction of Apple II and In Vacuum Undulators at ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH005, pp. 2459-2461.
[n] A. Bungau et al., “Design of the Photon Collimators for the ILC Positron Helical Undulator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP008, pp. 565-567.
[n] D. Angal-Kalinin et al., “Status of Clara Front End Commissioning and First User Experiments”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1851-1854. doi:10.18429/JACoW-IPAC2019-TUPRB083
[n] A. Young and H. Hassanzadegan, “Design of a New Super-heterodyne MicroTCA.4 BPM and LLRF Rear Transition Module (RTM) for the European Spallation”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 433-436. doi:10.18429/JACoW-IBIC2015-TUPB051
[n] T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 72-74. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO02
[n] H. Huang et al., “The Partial Siberian Snake Experiment at the Brookhaven AGS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 726-729.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Husain, R. Fielder, I. Martin, P. Burrows, and S. Wang, “Studies for single bunch and multi-bunch beam instabilities in the Diamond-II booster”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG18, pp. 1246-1249.
- W. Venturini Delsolaro et al., “Performance of the Superconducting Corrector Magnet Circuits during the Commissioning of the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD028, pp. 2470-2472.
- Y. Arakita et al., “The KEK Booster to Main Ring Beam Transfer System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1464-1467.
- Y. Kim, H. Kitamura, H. Matsumoto, T. Shintake, and K. Sawada, “Beam Parameter Optimization for the Phase-1 Stage of the SPring-8 Compact SASE Source (SCSS) Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI117, pp. 808-810.
- J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
- R. Nathawat, A. K. Kumar, and Y. K. Vijay, “Morphological Changes of Electron-beam Irradiated PMMA Surface”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN019, pp. 2745-2747.
- E. Syresin and V. P. Volnyh, “GEANT-4 Simulations of Secondary Positron Emitted Carbon Ion Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC065, pp. 4202-4204.
- A. M. Lombardi et al., “End-to-end beam dynamics for CERN Linac4”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAY02, pp. 79-83.
- S. Schreiber, “Performance Status of the RF-gun based Injector of the TESLA Test Facility Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THOAF203, pp. 309-311.
- A. Devred et al., “Time Decay Measurements of the Sextupole Component of the Magnetic Field in a 4-cm Aperture, 17-m-long SSC Dipole Magnet Prototype”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2480-2483.
- D. R. Swenson, D. Tupa, R. York, and O. B. van Dyck, “Optical Pumping of the Polarized H- ion Source at LAMPF”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1931-1934.
- S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3716-3719.
- C. Mangeot, “Nanopositioning and Actuation in Extreme Environment Using Piezoelectric Multilayer Actuators and Motors”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4519-4521.
- C. Ekdahl et al., “First Commissioning Experiments at DARHT-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT159, pp. 1497-1499.
- C. H. Kuo et al., “Fast Orbit Feeback System Upgrade with New Digital Bpm and Power Supply in the Tls”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC17, pp. 346-348.
- J. Chavanne, C. Penel, and P. Van Vaerenbergh, “Construction of Apple II and In Vacuum Undulators at ESRF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH005, pp. 2459-2461.
- A. Bungau et al., “Design of the Photon Collimators for the ILC Positron Helical Undulator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP008, pp. 565-567.
- D. Angal-Kalinin et al., “Status of Clara Front End Commissioning and First User Experiments”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1851-1854.
- A. Young and H. Hassanzadegan, “Design of a New Super-heterodyne MicroTCA.4 BPM and LLRF Rear Transition Module (RTM) for the European Spallation”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 433-436.
- T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 72-74.
- H. Huang et al., “The Partial Siberian Snake Experiment at the Brookhaven AGS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 726-729.
Back to search