Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. M. Pan et al., “High Power Conditioning of the Input Coupler for BEPCII Superconductor Cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP09, pp. XX-XX.
[n] J. Strait et al., “Methods to Detect Faulty Splices in the Superconducting Magnet System of the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP049, pp. 247-249.
[n] R. Stassen, B. Breitkreutz, T. Katayama, N. Shurkhno, H. Stockhorst, and L. Thorndahl, “First Experiences with HESR Stochastic Cooling System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2278-2280. doi:10.18429/JACoW-IPAC2017-TUPVA085
[n] V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
[n] R. I. Farnsworth, A. K. Grant, N. Hauser, and A. Rhyder, “Research Metadata Management at the Australian Synchrotron and ANSTO”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOAA03, pp. 121-123.
[n] Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2706-2709.
[n] G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
[n] R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
[n] L. Seabra et al., “The AFP Detector Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1315-1319. doi:10.18429/JACoW-ICALEPCS2017-THMPA05
[n] W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
[n] R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3280-3283.
[n] B. Copy, O. O. Andreassen, Ph. Gayet, M. Labrenz, H. Milcent, and F. Piccinelli, “Scalable Web Broadcasting for Historical Industrial Control Data”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 790-793. doi:10.18429/JACoW-ICALEPCS2015-WEPGF042
[n] W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 919-922. doi:10.18429/JACoW-ICALEPCS2015-WEPGF094
[n] J. Tang, L. Liu, J. Qiu, G. H. Wei, J. Wei, and C. Zhang, “Beam Preparation for the Injection into CSNS RCS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC12, pp. 320-325.
[n] E. Molina Marinas, A. Guirao, L. M. Martinez Fresno, I. Podadera, V. Villamayor, and A. Marqueta, “Status of the LIPAc MEBT Local Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1489-1491. doi:10.18429/JACoW-ICALEPCS2017-THPHA053
[n] S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 403-405.
[n] M. Izawa et al., “High-Power Conditioning of an RF Cavity for High Brilliant Synchrotron Radiation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP040L, pp. 1988-1990.
[n] J. Stiller, H. S. Matis, R. Miyamoto, A. Ratti, W. C. Turner, and S. M. White, “Simulation of the LHC BRAN Luminosity Monitor for High Luminosity Interaction Regions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC020, pp. 498-500.
[n] J. Reindl et al., “MiniBEE - Minibeam Beamline for Preclinical Experiments”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 34-36. doi:10.18429/JACoW-IBIC2023-MOP002
[n] R. Wright, D. Kerstiens, G. Vaughn, and R. E. Weiss, “EPICS Simulation Tools for Control System Development (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-61, pp. 845-847.
[n] N. M. Kroll, J.-S. Kim, and D. U. L. Yu, “Computer Determination of the Scattering Matrix Properties of N-Port Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-61, pp. 217-219.
[n] P. A. McIntosh et al., “Assembly Preparations for the International ERL Cryomodule at Daresbury Laboratory”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO098, pp. 864-868.
[n] T. Taylor, “A Simple Model of Ion Extraction from a Plasma Source”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-22, pp. 97-99.
[n] H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
[n] J. S. C. Wills, N. J. Diserens, P. A. Dube, R. Halko, and T. Taylor, “Microwave Driven Negative Ion Sources”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-17, pp. 401-403.
[n] S. T. Page and R. Alemany-Fernandez, “An Operational Event Announcer for the LHC Control Centre Using Speech Synthesis”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN004, pp. 242-245.
[n] Y. C. Yang, C. K. Chan, J.-Y. Chuang, Y. T. Huang, C. C. Liang, and I. C. Sheng, “Two Year Operational Experience With the Tps Vacuum System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3557-3560. doi:10.18429/JACoW-IPAC2017-WEPVA122
[n] K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
[n] M. Tanigaki et al., “Present Status of the FFAG Accelerator Complex in KURRI for ADS Study”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA115, pp. 803-805.
[n] R. M. Bodenstein, P. Burrows, J. Snuverink, and F. Plassard, “Intra-beam IP Feedback Studies for the 380 GeV CLIC Beam Delivery System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2683-2686. doi:10.18429/JACoW-IPAC2016-WEPOR009
[n] G. A. Loew et al., “High-Gradient Studies on 11.4 GHz Copper Accelerator Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-39, pp. 716-718.
[n] W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280.
[n] V. Ivanov, K. Ko, A. Krasnykh, L. Ives, and G. Miram, “3D Method for the Design of Multi or Sheet Beam RF Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH312, pp. 1213-1215.
[n] H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2818-2821.
[n] D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
[n] M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327.
[n] H. A. Schwettman et al., “Low Temperature Aspects of a Cryogenic Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 336-345.
[n] O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 852-854. doi:10.18429/JACoW-IPAC2019-MOPTS007
[n] T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
[n] P. Darriulat, “Superconducting Niobium Films for RF Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THX01B, pp. 179-183.
[n] R. Wanzenberg et al., “Research Activities Towards a Conversion of PETRA III Into a Diffraction Limited Synchrotron Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3077-3080. doi:10.18429/JACoW-IPAC2017-WEPIK065
[n] G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
[n] J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2785-2791.
[n] S. Kwon et al., “FPGA Implementation of a Control System for the LANSCE Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2771-2773. doi:10.18429/JACoW-IPAC2016-WEPOR044
[n] A. Rai et al., “Completion of the Superconducting Heavy Ion Linac at Inter-University Accelerator Centre”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP012, pp. 103-105.
[n] G. LeBlanc et al., “Measurements using the X-Ray and Optical Diagnostic Beamlines at the Australian Synchrotron”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA060, pp. 407-409.
[n] A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
[n] J. Lidon-Simon, V. H. Hardion, J. J. Jamroz, M. Lindberg, A. G. Persson, and D. P. Spruce, “Status of the MAX IV Laboratory Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC109, pp. 366-369.
[n] G. Bisoffi et al., “The Crystal Storage Ring Project at Legnaro”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 521-524.
[n] D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 414-418.
[n] J. Bobnar and K. Zagar, “BLED: A Top-down Approach to Accelerator Control System Design”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAULT03, pp. 537-539.
[n] A. V. Fedotov et al., “Electron Cooling for the Low-Energy RHIC Program”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO01, pp. 11-15.
For LaTeX
Use Complete Form
For BibTeX
References
- W. M. Pan et al., “High Power Conditioning of the Input Coupler for BEPCII Superconductor Cavity”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP09, pp. XX-XX.
- J. Strait et al., “Methods to Detect Faulty Splices in the Superconducting Magnet System of the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP049, pp. 247-249.
- R. Stassen, B. Breitkreutz, T. Katayama, N. Shurkhno, H. Stockhorst, and L. Thorndahl, “First Experiences with HESR Stochastic Cooling System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2278-2280.
- V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
- R. I. Farnsworth, A. K. Grant, N. Hauser, and A. Rhyder, “Research Metadata Management at the Australian Synchrotron and ANSTO”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THCOAA03, pp. 121-123.
- Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2706-2709.
- G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
- R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
- L. Seabra et al., “The AFP Detector Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1315-1319.
- W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
- R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3280-3283.
- B. Copy, O. O. Andreassen, Ph. Gayet, M. Labrenz, H. Milcent, and F. Piccinelli, “Scalable Web Broadcasting for Historical Industrial Control Data”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 790-793.
- W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 919-922.
- J. Tang, L. Liu, J. Qiu, G. H. Wei, J. Wei, and C. Zhang, “Beam Preparation for the Injection into CSNS RCS”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC12, pp. 320-325.
- E. Molina Marinas, A. Guirao, L. M. Martinez Fresno, I. Podadera, V. Villamayor, and A. Marqueta, “Status of the LIPAc MEBT Local Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1489-1491.
- S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 403-405.
- M. Izawa et al., “High-Power Conditioning of an RF Cavity for High Brilliant Synchrotron Radiation Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP040L, pp. 1988-1990.
- J. Stiller, H. S. Matis, R. Miyamoto, A. Ratti, W. C. Turner, and S. M. White, “Simulation of the LHC BRAN Luminosity Monitor for High Luminosity Interaction Regions”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC020, pp. 498-500.
- J. Reindl et al., “MiniBEE - Minibeam Beamline for Preclinical Experiments”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP002, pp. 34-36.
- R. Wright, D. Kerstiens, G. Vaughn, and R. E. Weiss, “EPICS Simulation Tools for Control System Development (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-61, pp. 845-847.
- N. M. Kroll, J.-S. Kim, and D. U. L. Yu, “Computer Determination of the Scattering Matrix Properties of N-Port Cavities”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-61, pp. 217-219.
- P. A. McIntosh et al., “Assembly Preparations for the International ERL Cryomodule at Daresbury Laboratory”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO098, pp. 864-868.
- T. Taylor, “A Simple Model of Ion Extraction from a Plasma Source”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-22, pp. 97-99.
- H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
- J. S. C. Wills, N. J. Diserens, P. A. Dube, R. Halko, and T. Taylor, “Microwave Driven Negative Ion Sources”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-17, pp. 401-403.
- S. T. Page and R. Alemany-Fernandez, “An Operational Event Announcer for the LHC Control Centre Using Speech Synthesis”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN004, pp. 242-245.
- Y. C. Yang, C. K. Chan, J.-Y. Chuang, Y. T. Huang, C. C. Liang, and I. C. Sheng, “Two Year Operational Experience With the Tps Vacuum System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3557-3560.
- K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
- M. Tanigaki et al., “Present Status of the FFAG Accelerator Complex in KURRI for ADS Study”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA115, pp. 803-805.
- R. M. Bodenstein, P. Burrows, J. Snuverink, and F. Plassard, “Intra-beam IP Feedback Studies for the 380 GeV CLIC Beam Delivery System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2683-2686.
- G. A. Loew et al., “High-Gradient Studies on 11.4 GHz Copper Accelerator Structures”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-39, pp. 716-718.
- W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3277-3280.
- V. Ivanov, K. Ko, A. Krasnykh, L. Ives, and G. Miram, “3D Method for the Design of Multi or Sheet Beam RF Sources”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH312, pp. 1213-1215.
- H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2818-2821.
- D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
- M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327.
- H. A. Schwettman et al., “Low Temperature Aspects of a Cryogenic Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 336-345.
- O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 852-854.
- T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
- P. Darriulat, “Superconducting Niobium Films for RF Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THX01B, pp. 179-183.
- R. Wanzenberg et al., “Research Activities Towards a Conversion of PETRA III Into a Diffraction Limited Synchrotron Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3077-3080.
- G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
- J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2785-2791.
- S. Kwon et al., “FPGA Implementation of a Control System for the LANSCE Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2771-2773.
- A. Rai et al., “Completion of the Superconducting Heavy Ion Linac at Inter-University Accelerator Centre”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP012, pp. 103-105.
- G. LeBlanc et al., “Measurements using the X-Ray and Optical Diagnostic Beamlines at the Australian Synchrotron”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA060, pp. 407-409.
- A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
- J. Lidon-Simon, V. H. Hardion, J. J. Jamroz, M. Lindberg, A. G. Persson, and D. P. Spruce, “Status of the MAX IV Laboratory Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC109, pp. 366-369.
- G. Bisoffi et al., “The Crystal Storage Ring Project at Legnaro”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 521-524.
- D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 414-418.
- J. Bobnar and K. Zagar, “BLED: A Top-down Approach to Accelerator Control System Design”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUAAULT03, pp. 537-539.
- A. V. Fedotov et al., “Electron Cooling for the Low-Energy RHIC Program”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO01, pp. 11-15.
Back to search