Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. C. Lampel, W. B. Herrmannsfeldt, R. E. Rand, and D. Y. Wang, “Sensitivity of Perveance to Cathode Placement in a Low Perveance Electron Gun”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1776-1779.
[n] S. Peng, L. T. Hoff, and K. Smith, “The SNS Ring LLRF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT066, pp. 3697-3699.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] J. Wei et al., “RHIC Sextant Test - Physics and Performance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B006, pp. 69-71.
[n] S. Thorin et al., “Design of the MAX IV Ring Injector and SPF/FEL Driver”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP178, pp. 2447-2449.
[n] K. L. F. Bane, M. Benedikt, A. Grudiev, E. Mahner, G. V. Stupakov, and U. Wienands, “Impedance Considerations for the Design of the Vacuum System of the CERN PS2 Proton Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD017, pp. 708-710.
[n] D. T. Abell and F. Meot, “New Algorithms in Zgoubi”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3418-3421. doi:10.18429/JACoW-IPAC2018-THPAK079
[n] M. Gasior, J. Olexa, and R. J. Steinhagen, “A High-resolution Diode-based Orbit Measurement System ÔÇô Prototype Results from the LHC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD24, pp. 98-100.
[n] G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832.
[n] T. Asaka, H. Tanaka, Y. Otake, and T. Taniuchi, “Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 949-951. doi:10.18429/JACoW-LINAC2018-THPO124
[n] K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
[n] M. Schillo et al., “A Beam Diagnostic System for ELSA”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1543-1546.
[n] S. Mahalingam, J. R. Cary, P. Stoltz, and S. A. Veitzer, “Modeling Breakdown in RF Cavities Using Particle-in-cell (PIC) codes”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP111, pp. 2767-2769.
[n] S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
[n] D. Filippetto et al., “Infrared Single Spike Pulses Generation Using a Short Period Superconducting Tape Undulator at APEX”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC14, pp. 129-132.
[n] M. Chen et al., “Ionization-Induced Trapping in Laser-Plasma Accelerators and Synchrotron Radiation from the Betatron Oscillation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP159, pp. 394-396.
[n] M. Komiyama, M. Fujimaki, N. Fukunishi, A. Uchiyama, M. Hamanaka, and T. Nakamura, “Recent Update of the RIKEN RI Beam Factory Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 427-430. doi:10.18429/JACoW-ICALEPCS2017-TUPHA028
[n] B. Steffen et al., “Electro-Optical Bunch Length Detection at the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 360-363. doi:10.18429/JACoW-FEL2019-WEP015
[n] E. Chiadroni, M. Castellano, A. Cianchi, K. Honkavaara, and G. Kube, “New Experimental Results with Optical Diffraction Radiation Diagnostics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC018, pp. 1083-1085.
[n] A. Moretti et al., “The Design of a 12.5-MHz Wider?Âe Linac for Ion Beam Fusion”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-5, pp. 152-158.
[n] A. Bosco, G. A. Blair, S. T. Boogert, and G. E. Boorman, “An Ultrafast Laser-Wire Scanner Based on Electro-Optics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP026, pp. 4006-4008.
[n] D. Angal-Kalinin et al., “Design of Post Linac Beam Transport for the UK New Light Source Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC036, pp. 1802-1804.
[n] S. Y. Lee and J. Wei, “Nonlinear Synchrotron Motion Near Transition Energy in RHIC”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 764-767.
[n] V. M. Biryukov, A. I. Drozhdin, and N. V. Mokhov, “On Possible Use of Bent Crystal to Improve Tevatron Beam Scraping”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA65, pp. 1234-1236.
[n] R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2818-2821. doi:10.18429/JACoW-IPAC2019-WEPRB011
[n] B. Mukherjee, “Utilisation of the Stray Neutron Field Produced by a Compact Medical Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-23, pp. 97-100.
[n] R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
[n] Y. Liu, M. Chen, D. Li, S. Wang, G. S. Chen, and W. Jia, “The Status of SMCAMS after Upgradings”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19003, pp. XX-XX.
[n] T. Mochizuki et al., “Direct LN2 Cooled Double Crystal Monochromator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 406-408. doi:10.18429/JACoW-MEDSI2018-THPH33
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] H. Zen et al., “Cavity Detuning Method to Compensate Beam Energy Decrement in Thermionic RF Gun due to Back-bombardment Effect”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC008, pp. 1725-1727.
[n] M. B. Andorf, P. Piot, V. A. Lebedev, and J. Ruan, “Nonlinear Phase Distortion in a Ti:Sapphire Optical Amplifier for Optical Stochastic Cooling”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3024-3027. doi:10.18429/JACoW-IPAC2016-WEPOY021
[n] F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-01, pp. 447-453.
[n] A. C. Morton, “Operational Considerations for Future Multi-user RIB Facilities”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOC03, pp. 41-44.
[n] F. Tamura et al., “Multi-Harmonic RF Control System for J-PARC RCS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB015, pp. 1216-1218.
[n] P. Kankiya, L. T. Hoff, and J. P. Jamilkowski, “Hardware Interface Independent Serial Communication (IISC)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC039, pp. 169-171.
[n] A. P. Letchford et al., “The RAL Front End Test Stand”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH112, pp. 303-305.
[n] H. Padamsee et al., “Does UHV Annealing above 1100C as a Final Surface Treatment Reduce Field Emission Loading in Superconducting Cavities?”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-35, pp. 397-399.
[n] S. X. Peng et al., “Study on Space Charge Compensation of Low Energy High Intensity Ion Beam in Peking University”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 453-457. doi:10.18429/JACoW-HB2016-WEPM6Y01
[n] T. Koseki, “Upgrade Plan of J-PARC MR - Toward 1.3 MW Beam Power”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 966-969. doi:10.18429/JACoW-IPAC2018-TUPAK005
[n] R. Schnuerer, C. P. Welsch, J. S. L. Yap, H. D. Zhang, O. Girard, and G. J. Haefeli, “Implementation of a Non-Invasive Online Beam Monitor at a 60 MeV Proton Therapy Beamline”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 449-452. doi:10.18429/JACoW-IPAC2018-MOPML024
[n] J. L. Vignet et al., “The Beam Profile Monitor for SPIRAL2”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB07, pp. 176-178.
[n] T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 274-276. doi:10.18429/JACoW-IPAC2017-MOPAB069
[n] R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF - Status Update”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 460-463. doi:10.18429/JACoW-ICALEPCS2015-MOPGF160
[n] G. Schreiber, E. Plechov, J. Salvatore, B. Schlitt, A. Schnase, and M. Vossberg, “First High Power Tests at the 325 MHz RF Test Stand at GSI”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 287-289. doi:10.18429/JACoW-LINAC2016-MOPLR067
[n] C. Ohmori et al., “High Field-Gradient Cavities Loaded with Magnetic Alloys for Synchrotrons”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAL1, pp. 413-417.
[n] D. Shuman et al., “Magnetic Lattice for the HIF Neutralized Transport Experiment (NTX)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG017, pp. 2628-2630.
[n] W. A. Barth et al., “First Acceleration of Heavy Ion Beams with a Superconducting Continuous Wave HIM/GSI CW-linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 297-302. doi:10.18429/JACoW-LINAC2018-TU2A01
[n] L. Phillips, J. Mammosser, and V. Nguyen, “New Window Design Options for CEBAF Energy Upgrade”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P033, pp. 3102-3104.
[n] M. Otani et al., “Development of a Muon Linac for the G-2/EDM Experiment at J-PARC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1037-1041. doi:10.18429/JACoW-LINAC2016-FR1A05
[n] M. Minty, “Collective Effects Associated with Ultra-High Beam Intensities in Factories”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEZF101, pp. 146-150.
[n] L. Groening, M. T. Maier, C. Xiao, and O. K. Kester, “Emittance Transfer in Linacs”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO3LR04, pp. 289-293.
[n] A. Falone et al., “RF Deflector for Bunch Length Measurement at Low Energy at PSI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP012, pp. 2012-2014.
[n] R. Connolly et al., “RHIC-Style IPMs in the Brookhaven AGS”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF02, pp. 39-41.
[n] G. V. Eremeev and A. D. Palczewski, “Evidence of Magnetic Breakdown on the Defects With Thermally Suppressed Critical Field in High Gradient SRF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP023, pp. 472-474.
[n] M. Kuriki, L. Guo, M. Urano, A. Yokota, K. Negishi, and Y. Seimiya, “A Lifetime Study of CsK2Sb Multi-Alkali Cathode”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1440-1442. doi:10.18429/JACoW-IPAC2017-TUPAB050
[n] D. Uriot, “Improvement of RF Field Phase and Amplitude Errors Simulations in TraceWin Code”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2983-2985. doi:10.18429/JACoW-IPAC2018-THPAF017
[n] M. Schwickert, T. Fleck, and A. Reiter, “Monolithic DAQ System for Beam Diagnostics at the HIT Medical Accelerator Facility”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP005, pp. 177-179.
[n] D. R. Anderson et al., “Design of a 6 MeV Electron Cooling System for the SSC Medium Energy Booster”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 836-839.
[n] M. Yamaga et al., “Event-Synchronized Data Acquisition System of 5 Giga-bps Data Rate for User Experiment at the XFEL Facility, SACLA”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST06, pp. 581-584.
[n] M. Yamamoto, T. Taniuchi, K. Kubo, T. Higo, and K. Takata, “Realistic Design of Detuned Structure for JLC”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-48, pp. 447-449.
[n] L. Martin, S. L. Sheehy, K. Ito, H. Okamoto, D. J. Kelliher, and S. Machida, “A new method to measure the Beta function in a Paul trap”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3262-3265. doi:10.18429/JACoW-IPAC2018-THPAK024
[n] F. Ciocci et al., “Recent Results of the ENEA Frascati FEL Experiment”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 550-552.
[n] G. Krafft and L. Merminga, “Energy Spread from RF Amplitude and Phase Errors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP015G, pp. 756-758.
[n] F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
[n] L. Faillace, R. B. Agustsson, A. Kumar, and K. K. Pant, “Injector System for the IR-FEL at RRCAT”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP121, pp. 1137-1139.
[n] S. A. Perezhogin et al., “The Bunching System Based on the Evanescent Oscillations”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE029, pp. 1605-1607.
[n] D. Giove and G. Cuttone, “Man Machine Interaction Tools Bases on X-Windows”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 878-881.
[n] K. Sato et al., “Status of the INS 176 cm Sector Focusing Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-07, pp. 1984-1987.
For LaTeX
Use Complete Form
For BibTeX
References
- M. C. Lampel, W. B. Herrmannsfeldt, R. E. Rand, and D. Y. Wang, “Sensitivity of Perveance to Cathode Placement in a Low Perveance Electron Gun”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1776-1779.
- S. Peng, L. T. Hoff, and K. Smith, “The SNS Ring LLRF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT066, pp. 3697-3699.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- J. Wei et al., “RHIC Sextant Test - Physics and Performance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B006, pp. 69-71.
- S. Thorin et al., “Design of the MAX IV Ring Injector and SPF/FEL Driver”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP178, pp. 2447-2449.
- K. L. F. Bane, M. Benedikt, A. Grudiev, E. Mahner, G. V. Stupakov, and U. Wienands, “Impedance Considerations for the Design of the Vacuum System of the CERN PS2 Proton Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD017, pp. 708-710.
- D. T. Abell and F. Meot, “New Algorithms in Zgoubi”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3418-3421.
- M. Gasior, J. Olexa, and R. J. Steinhagen, “A High-resolution Diode-based Orbit Measurement System ÔÇô Prototype Results from the LHC”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD24, pp. 98-100.
- G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832.
- T. Asaka, H. Tanaka, Y. Otake, and T. Taniuchi, “Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 949-951.
- K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
- M. Schillo et al., “A Beam Diagnostic System for ELSA”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1543-1546.
- S. Mahalingam, J. R. Cary, P. Stoltz, and S. A. Veitzer, “Modeling Breakdown in RF Cavities Using Particle-in-cell (PIC) codes”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP111, pp. 2767-2769.
- S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
- D. Filippetto et al., “Infrared Single Spike Pulses Generation Using a Short Period Superconducting Tape Undulator at APEX”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC14, pp. 129-132.
- M. Chen et al., “Ionization-Induced Trapping in Laser-Plasma Accelerators and Synchrotron Radiation from the Betatron Oscillation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP159, pp. 394-396.
- M. Komiyama, M. Fujimaki, N. Fukunishi, A. Uchiyama, M. Hamanaka, and T. Nakamura, “Recent Update of the RIKEN RI Beam Factory Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 427-430.
- B. Steffen et al., “Electro-Optical Bunch Length Detection at the European XFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 360-363.
- E. Chiadroni, M. Castellano, A. Cianchi, K. Honkavaara, and G. Kube, “New Experimental Results with Optical Diffraction Radiation Diagnostics”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC018, pp. 1083-1085.
- A. Moretti et al., “The Design of a 12.5-MHz Wider?Âe Linac for Ion Beam Fusion”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-5, pp. 152-158.
- A. Bosco, G. A. Blair, S. T. Boogert, and G. E. Boorman, “An Ultrafast Laser-Wire Scanner Based on Electro-Optics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP026, pp. 4006-4008.
- D. Angal-Kalinin et al., “Design of Post Linac Beam Transport for the UK New Light Source Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC036, pp. 1802-1804.
- S. Y. Lee and J. Wei, “Nonlinear Synchrotron Motion Near Transition Energy in RHIC”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 764-767.
- V. M. Biryukov, A. I. Drozhdin, and N. V. Mokhov, “On Possible Use of Bent Crystal to Improve Tevatron Beam Scraping”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA65, pp. 1234-1236.
- R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2818-2821.
- B. Mukherjee, “Utilisation of the Stray Neutron Field Produced by a Compact Medical Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-23, pp. 97-100.
- R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
- Y. Liu, M. Chen, D. Li, S. Wang, G. S. Chen, and W. Jia, “The Status of SMCAMS after Upgradings”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19003, pp. XX-XX.
- T. Mochizuki et al., “Direct LN2 Cooled Double Crystal Monochromator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 406-408.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- H. Zen et al., “Cavity Detuning Method to Compensate Beam Energy Decrement in Thermionic RF Gun due to Back-bombardment Effect”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC008, pp. 1725-1727.
- M. B. Andorf, P. Piot, V. A. Lebedev, and J. Ruan, “Nonlinear Phase Distortion in a Ti:Sapphire Optical Amplifier for Optical Stochastic Cooling”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3024-3027.
- F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-01, pp. 447-453.
- A. C. Morton, “Operational Considerations for Future Multi-user RIB Facilities”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOC03, pp. 41-44.
- F. Tamura et al., “Multi-Harmonic RF Control System for J-PARC RCS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB015, pp. 1216-1218.
- P. Kankiya, L. T. Hoff, and J. P. Jamilkowski, “Hardware Interface Independent Serial Communication (IISC)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC039, pp. 169-171.
- A. P. Letchford et al., “The RAL Front End Test Stand”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH112, pp. 303-305.
- H. Padamsee et al., “Does UHV Annealing above 1100C as a Final Surface Treatment Reduce Field Emission Loading in Superconducting Cavities?”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-35, pp. 397-399.
- S. X. Peng et al., “Study on Space Charge Compensation of Low Energy High Intensity Ion Beam in Peking University”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 453-457.
- T. Koseki, “Upgrade Plan of J-PARC MR - Toward 1.3 MW Beam Power”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 966-969.
- R. Schnuerer, C. P. Welsch, J. S. L. Yap, H. D. Zhang, O. Girard, and G. J. Haefeli, “Implementation of a Non-Invasive Online Beam Monitor at a 60 MeV Proton Therapy Beamline”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 449-452.
- J. L. Vignet et al., “The Beam Profile Monitor for SPIRAL2”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB07, pp. 176-178.
- T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 274-276.
- R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF - Status Update”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 460-463.
- G. Schreiber, E. Plechov, J. Salvatore, B. Schlitt, A. Schnase, and M. Vossberg, “First High Power Tests at the 325 MHz RF Test Stand at GSI”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 287-289.
- C. Ohmori et al., “High Field-Gradient Cavities Loaded with Magnetic Alloys for Synchrotrons”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAL1, pp. 413-417.
- D. Shuman et al., “Magnetic Lattice for the HIF Neutralized Transport Experiment (NTX)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG017, pp. 2628-2630.
- W. A. Barth et al., “First Acceleration of Heavy Ion Beams with a Superconducting Continuous Wave HIM/GSI CW-linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 297-302.
- L. Phillips, J. Mammosser, and V. Nguyen, “New Window Design Options for CEBAF Energy Upgrade”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P033, pp. 3102-3104.
- M. Otani et al., “Development of a Muon Linac for the G-2/EDM Experiment at J-PARC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1037-1041.
- M. Minty, “Collective Effects Associated with Ultra-High Beam Intensities in Factories”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEZF101, pp. 146-150.
- L. Groening, M. T. Maier, C. Xiao, and O. K. Kester, “Emittance Transfer in Linacs”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO3LR04, pp. 289-293.
- A. Falone et al., “RF Deflector for Bunch Length Measurement at Low Energy at PSI”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP012, pp. 2012-2014.
- R. Connolly et al., “RHIC-Style IPMs in the Brookhaven AGS”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF02, pp. 39-41.
- G. V. Eremeev and A. D. Palczewski, “Evidence of Magnetic Breakdown on the Defects With Thermally Suppressed Critical Field in High Gradient SRF Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP023, pp. 472-474.
- M. Kuriki, L. Guo, M. Urano, A. Yokota, K. Negishi, and Y. Seimiya, “A Lifetime Study of CsK2Sb Multi-Alkali Cathode”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1440-1442.
- D. Uriot, “Improvement of RF Field Phase and Amplitude Errors Simulations in TraceWin Code”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2983-2985.
- M. Schwickert, T. Fleck, and A. Reiter, “Monolithic DAQ System for Beam Diagnostics at the HIT Medical Accelerator Facility”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP005, pp. 177-179.
- D. R. Anderson et al., “Design of a 6 MeV Electron Cooling System for the SSC Medium Energy Booster”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 836-839.
- M. Yamaga et al., “Event-Synchronized Data Acquisition System of 5 Giga-bps Data Rate for User Experiment at the XFEL Facility, SACLA”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUCAUST06, pp. 581-584.
- M. Yamamoto, T. Taniuchi, K. Kubo, T. Higo, and K. Takata, “Realistic Design of Detuned Structure for JLC”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-48, pp. 447-449.
- L. Martin, S. L. Sheehy, K. Ito, H. Okamoto, D. J. Kelliher, and S. Machida, “A new method to measure the Beta function in a Paul trap”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3262-3265.
- F. Ciocci et al., “Recent Results of the ENEA Frascati FEL Experiment”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 550-552.
- G. Krafft and L. Merminga, “Energy Spread from RF Amplitude and Phase Errors”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP015G, pp. 756-758.
- F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
- L. Faillace, R. B. Agustsson, A. Kumar, and K. K. Pant, “Injector System for the IR-FEL at RRCAT”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP121, pp. 1137-1139.
- S. A. Perezhogin et al., “The Bunching System Based on the Evanescent Oscillations”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE029, pp. 1605-1607.
- D. Giove and G. Cuttone, “Man Machine Interaction Tools Bases on X-Windows”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 878-881.
- K. Sato et al., “Status of the INS 176 cm Sector Focusing Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-07, pp. 1984-1987.
Back to search