Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. C. Joshi et al., “Development of Superconducting Cavities and Related Infrastructure for High Intensity Proton Linac for Spallation Neutron Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP122, pp. 1140-1143.
[n] K. L. Erdman, “Invited Paper: Recent Developments at TRIUMF”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-02, pp. 1958-1964.
[n] I. S. Jung et al., “Design of the RF System for 30 MeV Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH137, pp. 1340-1342.
[n] Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
[n] T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
[n] J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “VELA (formerly EBTF) Simulations and First Beam Commissioning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI065, pp. 431-433.
[n] T. Bhattacharjee et al., “Introduction of EPICS in VEC amp; SCC Control Systems”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA130, pp. 827-828.
[n] E. Chojnacki and W. J. Alton, “Beamline RF Load Development at Cornell”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP77, pp. 845-847.
[n] M. Hape et al., “High Dynamic Magnetic Beam Current Measurements by Means of Optimised Magneto-Resistance (MR) Sensor Engineering”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM029, pp. XX-XX.
[n] R. Abbott et al., “Design, Commissioning and Operation of the Upgraded CEBAF Injector (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-30, pp. 777-779.
[n] S. S. Cha, J. H. Ha, J. H. Kim, Y. Kim, P. Buaphad, and S. D. Yang, “Development of EPICS Control System for ODA Magnet Power Supplies and GigE CCD Camera”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2392-2394. doi:10.18429/JACoW-IPAC2016-WEPMR052
[n] Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
[n] S. Matsuba, K. Harada, M. Katoh, K. Kawase, and K. S. Shimada, “Design Study of an Electron Storage Ring for the Future Plan of Hiroshima Synchrotron Radiation Center.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 200-202. doi:10.18429/JACoW-IPAC2019-MOPGW048
[n] D. V. Mitchell et al., “SRF Main Linac Cryomodule Design at Fermilab”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO042, pp. 672-674.
[n] S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
[n] A. Dhar et al., “Solid-state driven X-band linac for electron microscopy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3710-3713. doi:10.18429/JACoW-IPAC2024-THPR85
[n] O. Capatina et al., “Mechanical Design Considerations for =1 Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THIOA06, pp. 650-658.
[n] Y. Kobayashi et al., “Development of a Pulsed Sextupole Magnet System for Beam Injection at the Photon Factory Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN034, pp. 230-232.
[n] A. Dhar et al., “Distributed Coupling Linac for Efficient Acceleration of High Charge Electron Bunches”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 724-726. doi:10.18429/JACoW-LINAC2022-THPOJO14
[n] H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 141-144.
[n] J. G. Hwang, S. Y. Noh, P. Forck, C. Kim, and T. K. Yang, “Development of Capacitive Linear-Cut Beam Position Monitor for Heavy-Ion Synchrotron of KHIMA Project”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 405-409. doi:10.18429/JACoW-IBIC2015-TUPB041
[n] Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, S. D. Yang, and Y. D. Park, “Neural Network Based Generalized Predictive Control for RFT-30 Cyclotron System”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 212-214. doi:10.18429/JACoW-Cyclotrons2016-TUP19
[n] P. Craievich, M. Petronio, and R. Vescovo, “Deflecting Mode Optimization for a High Energy Beam Diagnostic Tool”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP063, pp. 4096-4098.
[n] P. Lanz, M. Zach, and M. Lipnicky, “A Dual Frequency Resonator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1151-1154.
[n] A. Puntambekar et al., “Experiences with the Manufacturing, Testing and Quality Control of Large Number of Superconducting Magnets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC2MA02, pp. 567-569.
[n] N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687. doi:10.18429/JACoW-SRF2021-WEOCAV03
[n] J. Kang, H. M. Jang, B. Kang, J.-W. Kim, and J. H. Lee, “Status of the ISOL Cyclotron System in RISP”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 356-358. doi:10.18429/JACoW-Cyclotrons2016-THP22
[n] S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
[n] R. Appio, P. Craievich, M. Ferianis, and M. Veronese, “Simulations of the Coherent Gap Radiation for the Bunch Length Monitor of FERMI@Elettra”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD37, pp. 134-136.
[n] P. Piot, M. B. Andorf, G. Fagerberg, and M. Figora, “Development of Short Undulators for Electron-Beam-Radiation Interaction Studies”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 380-382. doi:10.18429/JACoW-NAPAC2016-TUPOA47
[n] M. C. Burton, M. Beebe, R. A. Lukaszew, A. D. Palczewski, H. L. Phillips, and C. E. Reece, “RF Results of Nb Coated SRF Accelerator Cavities via HiPIMS”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 535-538. doi:10.18429/JACoW-SRF2017-TUPB066
[n] D. H. Beck et al., “The New White Rabbit Based Timing System for the FAIR Facility”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRIA01, pp. 242-244.
[n] L. Coney, R. R. M. Fletcher, and G. G. Hanson, “Measurement of Neutral Particle Contamination in the MICE Muon Beam”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP053, pp. 199-201.
[n] D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
[n] Y.-S. Cho, B. H. Choi, and W. S. Song, “Development of 1MV Tandem Proton Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH026, pp. 2503-2505.
[n] H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
[n] E. Hoyer et al., “The Beam Line X Nd Fe-Steel Hybrid Wiggler for SSRL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1508-1511.
[n] A. Pichard et al., “Method for Efficiency and Time Response Measurement on Diverse Target Ion Sources with Stable Alkali”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC154, pp. 436-438.
[n] W. Wu, B. Quinn, and J. D. Crnkovic, “Using Time Evolution of the Bunch Structure to Extract the Muon Momentum Distribution in the Fermilab Muon g-2 Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1526-1528. doi:10.18429/JACoW-IPAC2018-TUPMK016
[n] R. Bachelard et al., “Deep Saturation Dynamics in a Free Electron Laser”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOOB03, pp. 23-26.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
[n] Y. M. Park et al., “Development of SC Bus-Line for The KSTAR Superconducting Magnet”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU475, pp. 491-493.
[n] D. La Civita, P. Craievich, Y. A. Kharoubi, G. Penco, and M. Petronio, “FERMI@Elettra Low-Energy RF Deflector FEM Analysis”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD097, pp. 933-935.
[n] K. Nam and J. Choi, “A Study of a TBA Lattice for the Pohang Light Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1399-1402.
[n] V. P. Yakovlev et al., “Status of the SRF Development for the Project X”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP015, pp. 117-122.
[n] K. Harada, Y. Kobayashi, N. Nakamura, K. Oide, H. Sakai, and S. Sakanaka, “The Low Emittance Reconstruction of the Arc Section of the Photon Factory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2874-2876. doi:10.18429/JACoW-IPAC2016-WEPOW021
[n] G. Janser, G. Dzieglewski, W. Hugentobler, and F. Kreis, “Control System Hardware Upgrade”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC034, pp. 151-153.
[n] T. Shiraga et al., “Beam Optics Study for the Compact ERL in Japan”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP084, pp. 1284-1286.
[n] S. L. Leloir, T. A. Andre, B. Ducoudret, C. Jamet, G. Ledu, and C. Potier de courcy, “Measurement and Control of the Beam Intensity for the SPIRAL2 Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF33, pp. 900-902.
[n] M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710.
[n] M. P. Kelly, D. J. Bice, S. M. Gerbick, and G. Wu, “Electropolishing at ANL/FNAL”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO066, pp. 765-768.
[n] S. J. Burger, P. J. Celliers, Z. B. du Toit, G. S. Z. Guasco, L. M. Roels, and H. A. Smit, “On the Design of the Central Region of an 8 MeV Injector Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B13, pp. 67-70.
[n] K. L. Erdman et al., “Initial Operation of the Sherbrooke EBCO 19 MeV Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper C-05, pp. 327-330.
[n] A. Antoniazzi et al., “Multiple Time Scale Theory of Single-Pass Steady-State”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP011, pp. XX-XX.
[n] K. L. Erdman, K. H. Brackhaus, and R. H. M. Gummer, “Some Aspects of the Control and Stabilization of the RF Accelerating Voltage in the TRIUMF Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 444-451.
For LaTeX
Use Complete Form
For BibTeX
References
- S. C. Joshi et al., “Development of Superconducting Cavities and Related Infrastructure for High Intensity Proton Linac for Spallation Neutron Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP122, pp. 1140-1143.
- K. L. Erdman, “Invited Paper: Recent Developments at TRIUMF”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-02, pp. 1958-1964.
- I. S. Jung et al., “Design of the RF System for 30 MeV Cyclotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH137, pp. 1340-1342.
- Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
- T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
- J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “VELA (formerly EBTF) Simulations and First Beam Commissioning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI065, pp. 431-433.
- T. Bhattacharjee et al., “Introduction of EPICS in VEC amp; SCC Control Systems”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA130, pp. 827-828.
- E. Chojnacki and W. J. Alton, “Beamline RF Load Development at Cornell”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP77, pp. 845-847.
- M. Hape et al., “High Dynamic Magnetic Beam Current Measurements by Means of Optimised Magneto-Resistance (MR) Sensor Engineering”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM029, pp. XX-XX.
- R. Abbott et al., “Design, Commissioning and Operation of the Upgraded CEBAF Injector (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-30, pp. 777-779.
- S. S. Cha, J. H. Ha, J. H. Kim, Y. Kim, P. Buaphad, and S. D. Yang, “Development of EPICS Control System for ODA Magnet Power Supplies and GigE CCD Camera”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2392-2394.
- Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
- S. Matsuba, K. Harada, M. Katoh, K. Kawase, and K. S. Shimada, “Design Study of an Electron Storage Ring for the Future Plan of Hiroshima Synchrotron Radiation Center.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 200-202.
- D. V. Mitchell et al., “SRF Main Linac Cryomodule Design at Fermilab”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO042, pp. 672-674.
- S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
- A. Dhar et al., “Solid-state driven X-band linac for electron microscopy”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR85, pp. 3710-3713.
- O. Capatina et al., “Mechanical Design Considerations for =1 Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THIOA06, pp. 650-658.
- Y. Kobayashi et al., “Development of a Pulsed Sextupole Magnet System for Beam Injection at the Photon Factory Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN034, pp. 230-232.
- A. Dhar et al., “Distributed Coupling Linac for Efficient Acceleration of High Charge Electron Bunches”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 724-726.
- H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 141-144.
- J. G. Hwang, S. Y. Noh, P. Forck, C. Kim, and T. K. Yang, “Development of Capacitive Linear-Cut Beam Position Monitor for Heavy-Ion Synchrotron of KHIMA Project”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 405-409.
- Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, S. D. Yang, and Y. D. Park, “Neural Network Based Generalized Predictive Control for RFT-30 Cyclotron System”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 212-214.
- P. Craievich, M. Petronio, and R. Vescovo, “Deflecting Mode Optimization for a High Energy Beam Diagnostic Tool”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP063, pp. 4096-4098.
- P. Lanz, M. Zach, and M. Lipnicky, “A Dual Frequency Resonator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1151-1154.
- A. Puntambekar et al., “Experiences with the Manufacturing, Testing and Quality Control of Large Number of Superconducting Magnets”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC2MA02, pp. 567-569.
- N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687.
- J. Kang, H. M. Jang, B. Kang, J.-W. Kim, and J. H. Lee, “Status of the ISOL Cyclotron System in RISP”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 356-358.
- S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
- R. Appio, P. Craievich, M. Ferianis, and M. Veronese, “Simulations of the Coherent Gap Radiation for the Bunch Length Monitor of FERMI@Elettra”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD37, pp. 134-136.
- P. Piot, M. B. Andorf, G. Fagerberg, and M. Figora, “Development of Short Undulators for Electron-Beam-Radiation Interaction Studies”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 380-382.
- M. C. Burton, M. Beebe, R. A. Lukaszew, A. D. Palczewski, H. L. Phillips, and C. E. Reece, “RF Results of Nb Coated SRF Accelerator Cavities via HiPIMS”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 535-538.
- D. H. Beck et al., “The New White Rabbit Based Timing System for the FAIR Facility”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRIA01, pp. 242-244.
- L. Coney, R. R. M. Fletcher, and G. G. Hanson, “Measurement of Neutral Particle Contamination in the MICE Muon Beam”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP053, pp. 199-201.
- D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
- Y.-S. Cho, B. H. Choi, and W. S. Song, “Development of 1MV Tandem Proton Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH026, pp. 2503-2505.
- H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
- E. Hoyer et al., “The Beam Line X Nd Fe-Steel Hybrid Wiggler for SSRL”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1508-1511.
- A. Pichard et al., “Method for Efficiency and Time Response Measurement on Diverse Target Ion Sources with Stable Alkali”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC154, pp. 436-438.
- W. Wu, B. Quinn, and J. D. Crnkovic, “Using Time Evolution of the Bunch Structure to Extract the Muon Momentum Distribution in the Fermilab Muon g-2 Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1526-1528.
- R. Bachelard et al., “Deep Saturation Dynamics in a Free Electron Laser”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOOB03, pp. 23-26.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
- Y. M. Park et al., “Development of SC Bus-Line for The KSTAR Superconducting Magnet”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU475, pp. 491-493.
- D. La Civita, P. Craievich, Y. A. Kharoubi, G. Penco, and M. Petronio, “FERMI@Elettra Low-Energy RF Deflector FEM Analysis”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD097, pp. 933-935.
- K. Nam and J. Choi, “A Study of a TBA Lattice for the Pohang Light Source”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1399-1402.
- V. P. Yakovlev et al., “Status of the SRF Development for the Project X”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP015, pp. 117-122.
- K. Harada, Y. Kobayashi, N. Nakamura, K. Oide, H. Sakai, and S. Sakanaka, “The Low Emittance Reconstruction of the Arc Section of the Photon Factory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2874-2876.
- G. Janser, G. Dzieglewski, W. Hugentobler, and F. Kreis, “Control System Hardware Upgrade”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC034, pp. 151-153.
- T. Shiraga et al., “Beam Optics Study for the Compact ERL in Japan”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP084, pp. 1284-1286.
- S. L. Leloir, T. A. Andre, B. Ducoudret, C. Jamet, G. Ledu, and C. Potier de courcy, “Measurement and Control of the Beam Intensity for the SPIRAL2 Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF33, pp. 900-902.
- M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1707-1710.
- M. P. Kelly, D. J. Bice, S. M. Gerbick, and G. Wu, “Electropolishing at ANL/FNAL”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO066, pp. 765-768.
- S. J. Burger, P. J. Celliers, Z. B. du Toit, G. S. Z. Guasco, L. M. Roels, and H. A. Smit, “On the Design of the Central Region of an 8 MeV Injector Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B13, pp. 67-70.
- K. L. Erdman et al., “Initial Operation of the Sherbrooke EBCO 19 MeV Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper C-05, pp. 327-330.
- A. Antoniazzi et al., “Multiple Time Scale Theory of Single-Pass Steady-State”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP011, pp. XX-XX.
- K. L. Erdman, K. H. Brackhaus, and R. H. M. Gummer, “Some Aspects of the Control and Stabilization of the RF Accelerating Voltage in the TRIUMF Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 444-451.
Back to search