Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. A. Antaya, J. A. Kuchar, M. L. Mallory, P. S. Miller, and J. Riedel, “The Development of Heavy Ion PIG Sources for the NSCL K-500 Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B30, pp. 126-129.
[n] W. Liu and W. Gai, “Update on the ILC Positron Source Study at ANL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC036, pp. 4134-4136.
[n] N. Voumard, N. Magnin, and P. Van Trappen, “SPS Beam Dump Enhancements on Tracking and Synchronization”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1444-1448. doi:10.18429/JACoW-ICALEPCS2023-THPDP057
[n] A. Pollard, D. Dunning, E. Snedden, and W. Okell, “Machine learning for laser pulse shaping”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4495-4498. doi:10.18429/JACoW-IPAC2023-THPL034
[n] D. Yu and Y. Luo, “A Continuous Wave, Normal Conducting, L-Band PWT Photoelectron Gun”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP053, pp. 479-481.
[n] F. Marti, S. Hitchcock, P. S. Miller, J. W. Stetson, and J. Yurkon, “Stripper Foil Developments at NSCL/MSU”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper THM2CCO03, pp. 373-375.
[n] A. Guirao et al., “Update on the Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1025-1028. doi:10.18429/JACoW-IPAC2015-MOPTY043
[n] O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “Spinor Based Calculation of Depolarizing Effects in Circular Lepton Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC052, pp. 2130-2132.
[n] J. Calvo, D. Jimenez-Rey, E. Molina Marinas, J. Molla, and I. Podadera, “MEBT and D-Plate Control System Status of the Linear IFMIF Prototype Accelerator”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 197-200. doi:10.18429/JACoW-ICALEPCS2015-MOPGF045
[n] S. Pande et al., “CODAC Standardisation of PLC Communication”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC004, pp. 1097-1099.
[n] V. G. Dudnikov et al., “Surface Plasma H- Ion Source with Saddle RF Antenna Plasma Generator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS026, pp. 3475-3477.
[n] G. Huang, L. R. Doolittle, Y. L. Xu, and J. Yang, “Low Noise Digitizer Design for LCLS-II LLRF”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 364-366. doi:10.18429/JACoW-NAPAC2016-TUPOA40
[n] A. P. Lee et al., “First Operation of a Thermionic Cathode RF Gun at NSRRC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN073, pp. 1088-1090.
[n] S. A. Belomestnykh et al., “High Power Testing RF System Components for the Cornell ERL Injector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH175, pp. 472-474.
[n] A. Valloni et al., “Strawman Optics Design for the CERN LHeC ERL Test Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME055, pp. 1694-1696.
[n] S. P. Antipov et al., “Metamaterial-loaded Waveguides for Accelerator Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN086, pp. 2906-2908.
[n] J. Yang et al., “Synchronization System for Tsinghua Thomson Scattering X-ray Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4237-4239. doi:10.18429/JACoW-IPAC2016-THPOY059
[n] J. Haimson and B. Mecklenburg, “A Relativistically Corrected Three Dimensional Space Charge Analysis of Electron Bunching”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 586-594.
[n] D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
[n] N. Utzel et al., “ITER Contribution to Control System Studio (CSS) Development Effort”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB08, pp. 540-543.
[n] P. P. Goryl et al., “Tango Based Control System at SOLARIS Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4101-4103. doi:10.18429/JACoW-IPAC2016-THPOY008
[n] A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
[n] A. Kisiel, M. B. Jaglarz, M. P. Kope?é, S. Piela, M. J. Stankiewicz, and A. I. Wawrzyniak, “Beta Function Measurement in the SOLARIS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 736-738. doi:10.18429/JACoW-IPAC2017-MOPIK090
[n] P. P. Goryl et al., “Status of the Solaris Control System - Collaborations and Technology”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 510-512. doi:10.18429/JACoW-ICALEPCS2015-MOPGF179
[n] S. P. Antipov, W. Gai, W. Liu, and L. K. Spentzouris, “Simulations of the Rotating Positron Target in the Presence of OMD Field”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN087, pp. 2909-2911.
[n] W. Corbett et al., “SPEAR 3 Upgrade Project: A Status Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH091, pp. 2674-2676.
[n] J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n] R. Lange and F. Di Maio, “Optimizing EPICS for Multi-Core Architectures”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC124, pp. 399-402.
[n] W. Liu, W. Gai, and K.-J. Kim, “Systematic Study of Undulator Based ILC Positron Source: Production and Capture”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN090, pp. 2918-2920.
[n] M. P. Stockli et al., “Highly-Persistent SNS H- Source Fueling 1-MW Beams with 7-9 kC Service Cycles”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP275, pp. 1993-1995.
[n] M. A. G. Johansson, K. Kara, and R. Nietubyc, “MAX IV and Solaris 1.5 GeV Storage Rings Magnet Block Production Series Measurement Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1058-1060. doi:10.18429/JACoW-NAPAC2016-THA1CO03
[n] M. E. Conde et al., “The Argonne Wakefield Accelerator Facility (AWA): Upgrades and Future Experiments”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP055, pp. 2923-2925.
[n] J. Castellanos et al., “Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 840-842. doi:10.18429/JACoW-LINAC2016-THPRC031
[n] F. Di Maio et al., “The CODAC Software Distribution for the ITER Plant Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS029, pp. 227-230.
[n] L. Zytniak et al., “GeoSynoptic Panel”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC112, pp. 840-843.
[n] R. L. Madrak, V. S. Kashikhin, A. V. Makarov, and D. Wildman, “Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz RF Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA14, pp. 1013-1015.
[n] G. Eremeev and H. Padamsee, “High Field Q-Slope's Studies Using Thermometry”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA08, pp. 189-192.
[n] J. Rathke et al., “Prototyping Activities at AES for ANL-RIA and ATLAS Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP16, pp. 492-492.
[n] F. L. Krawczyk et al., “RF-loss Measurements in an Open Coaxial Resonator for Characterization of Copper Plating”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS021, pp. 2376-2378.
[n] T. Hori, T. Mitsumoto, Y. Sasaki, and M. Sugitani, “Improvement of 150 MeV Racetrack Microtron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2877-2880.
[n] J. Riedel, T. F. Droege, C. L. Kang, and J. Kirchgessner, “Electronic Instrumentation and Control at the Princeton-Pennsylvania Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 31-36.
[n] M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 352-354. doi:10.18429/JACoW-IPAC2017-MOPAB096
[n] F. Di Maio et al., “Development of the ITER CODAC Core Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOC005, pp. 22-24.
[n] L. T. Sun et al., “Status of FECR Ion Source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WET2AUCO03, unpublished.
[n] B. Scott, R. Hettel, H.-D. Nuhn, and J. Sebek, “SSRL Beam Position Monitors”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1545-1548.
[n] G. Eremeev and H. Padamsee, “Change in High Field Q-slope by Baking and Anodizing”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP03, pp. 236-239.
[n] R. Hettel et al., “Design and Characterization of the SSRL Orbit Feedback System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1580-1583.
[n] F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
[n] A. Burger and E. Peterson, “U.S. Industrial Fabrication of a 5-Cell Superconducting Radio Frequency (SCRF) Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH164, pp. 1166-1168.
[n] Ch. Wang et al., “Commissioning Experience of Superconducting Radio Frequency Systems for the Taiwan Light Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THYMA03, pp. 549-553.
[n] W. Corbett et al., “Status of Digital Orbit Feedback for SPEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP094L, pp. 1931-1936.
[n] X. P. Ding et al., “Gallium as a Possible Target Material for a Muon Collider or Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC044, pp. 232-234.
[n] A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 432-434. doi:10.18429/JACoW-IPAC2016-MOPMW017
[n] H. R?Âcken et al., “Progress at Varian's Superconducting Cyclotrons: A Base for the ProBeamTM Platform”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT012, pp. 55-57.
[n] I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 554-557. doi:10.18429/JACoW-LINAC2016-TUPLR041
[n] J. J. Sebek, W. J. Corbett, S. M. Gierman, X. Huang, J. A. Safranek, and K. Tian, “Diagnostics for Physics Applications at SPEAR3”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG018, pp. 65-67.
[n] M. Omet et al., “Development of FPGA-based Predistortion-type Linearization Algorithms for Klystrons within Digital LLRF Control Systems for ILC-like Electron Accelerators”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP130, pp. 1162-1164.
[n] Y. Goren and D. Yu, “CONDOR Simulation of an 11.4GHz Traveling Wave Output Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 813-816.
[n] J. R. Boyce et al., “Linac-Ring Colliders with High Disruption Parameters-A First Test of Principle”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3264-3267.
[n] T. Wakasa et al., “High Resolution WS Beam Line at RCNP”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-17, pp. XX-XX.
[n] T. Nakamoto et al., “Development of Superconducting Combined Function Magnets for the Proton Transport Line for the J-PARC Neutrino Experiments”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAA006, pp. 495-499.
[n] J. Bailey, J. Kuchar, F. Marti, J. Yurkon, J. A. Nolen, and D. Rifuggiato, “Selection and Measurement of RF Phase Width of the K1200 Cyclotron Beam”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-04, pp. 431-434.
For LaTeX
Use Complete Form
For BibTeX
References
- T. A. Antaya, J. A. Kuchar, M. L. Mallory, P. S. Miller, and J. Riedel, “The Development of Heavy Ion PIG Sources for the NSCL K-500 Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B30, pp. 126-129.
- W. Liu and W. Gai, “Update on the ILC Positron Source Study at ANL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC036, pp. 4134-4136.
- N. Voumard, N. Magnin, and P. Van Trappen, “SPS Beam Dump Enhancements on Tracking and Synchronization”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP057, pp. 1444-1448.
- A. Pollard, D. Dunning, E. Snedden, and W. Okell, “Machine learning for laser pulse shaping”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL034, pp. 4495-4498.
- D. Yu and Y. Luo, “A Continuous Wave, Normal Conducting, L-Band PWT Photoelectron Gun”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP053, pp. 479-481.
- F. Marti, S. Hitchcock, P. S. Miller, J. W. Stetson, and J. Yurkon, “Stripper Foil Developments at NSCL/MSU”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper THM2CCO03, pp. 373-375.
- A. Guirao et al., “Update on the Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1025-1028.
- O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “Spinor Based Calculation of Depolarizing Effects in Circular Lepton Accelerators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC052, pp. 2130-2132.
- J. Calvo, D. Jimenez-Rey, E. Molina Marinas, J. Molla, and I. Podadera, “MEBT and D-Plate Control System Status of the Linear IFMIF Prototype Accelerator”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 197-200.
- S. Pande et al., “CODAC Standardisation of PLC Communication”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC004, pp. 1097-1099.
- V. G. Dudnikov et al., “Surface Plasma H- Ion Source with Saddle RF Antenna Plasma Generator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS026, pp. 3475-3477.
- G. Huang, L. R. Doolittle, Y. L. Xu, and J. Yang, “Low Noise Digitizer Design for LCLS-II LLRF”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 364-366.
- A. P. Lee et al., “First Operation of a Thermionic Cathode RF Gun at NSRRC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN073, pp. 1088-1090.
- S. A. Belomestnykh et al., “High Power Testing RF System Components for the Cornell ERL Injector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH175, pp. 472-474.
- A. Valloni et al., “Strawman Optics Design for the CERN LHeC ERL Test Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME055, pp. 1694-1696.
- S. P. Antipov et al., “Metamaterial-loaded Waveguides for Accelerator Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN086, pp. 2906-2908.
- J. Yang et al., “Synchronization System for Tsinghua Thomson Scattering X-ray Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4237-4239.
- J. Haimson and B. Mecklenburg, “A Relativistically Corrected Three Dimensional Space Charge Analysis of Electron Bunching”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 586-594.
- D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
- N. Utzel et al., “ITER Contribution to Control System Studio (CSS) Development Effort”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB08, pp. 540-543.
- P. P. Goryl et al., “Tango Based Control System at SOLARIS Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4101-4103.
- A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
- A. Kisiel, M. B. Jaglarz, M. P. Kope?é, S. Piela, M. J. Stankiewicz, and A. I. Wawrzyniak, “Beta Function Measurement in the SOLARIS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 736-738.
- P. P. Goryl et al., “Status of the Solaris Control System - Collaborations and Technology”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 510-512.
- S. P. Antipov, W. Gai, W. Liu, and L. K. Spentzouris, “Simulations of the Rotating Positron Target in the Presence of OMD Field”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN087, pp. 2909-2911.
- W. Corbett et al., “SPEAR 3 Upgrade Project: A Status Report”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH091, pp. 2674-2676.
- J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1151-1153.
- R. Lange and F. Di Maio, “Optimizing EPICS for Multi-Core Architectures”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC124, pp. 399-402.
- W. Liu, W. Gai, and K.-J. Kim, “Systematic Study of Undulator Based ILC Positron Source: Production and Capture”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN090, pp. 2918-2920.
- M. P. Stockli et al., “Highly-Persistent SNS H- Source Fueling 1-MW Beams with 7-9 kC Service Cycles”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP275, pp. 1993-1995.
- M. A. G. Johansson, K. Kara, and R. Nietubyc, “MAX IV and Solaris 1.5 GeV Storage Rings Magnet Block Production Series Measurement Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1058-1060.
- M. E. Conde et al., “The Argonne Wakefield Accelerator Facility (AWA): Upgrades and Future Experiments”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP055, pp. 2923-2925.
- J. Castellanos et al., “Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 840-842.
- F. Di Maio et al., “The CODAC Software Distribution for the ITER Plant Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS029, pp. 227-230.
- L. Zytniak et al., “GeoSynoptic Panel”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC112, pp. 840-843.
- R. L. Madrak, V. S. Kashikhin, A. V. Makarov, and D. Wildman, “Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz RF Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA14, pp. 1013-1015.
- G. Eremeev and H. Padamsee, “High Field Q-Slope's Studies Using Thermometry”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA08, pp. 189-192.
- J. Rathke et al., “Prototyping Activities at AES for ANL-RIA and ATLAS Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP16, pp. 492-492.
- F. L. Krawczyk et al., “RF-loss Measurements in an Open Coaxial Resonator for Characterization of Copper Plating”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS021, pp. 2376-2378.
- T. Hori, T. Mitsumoto, Y. Sasaki, and M. Sugitani, “Improvement of 150 MeV Racetrack Microtron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2877-2880.
- J. Riedel, T. F. Droege, C. L. Kang, and J. Kirchgessner, “Electronic Instrumentation and Control at the Princeton-Pennsylvania Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 31-36.
- M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 352-354.
- F. Di Maio et al., “Development of the ITER CODAC Core Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOC005, pp. 22-24.
- L. T. Sun et al., “Status of FECR Ion Source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WET2AUCO03, unpublished.
- B. Scott, R. Hettel, H.-D. Nuhn, and J. Sebek, “SSRL Beam Position Monitors”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1545-1548.
- G. Eremeev and H. Padamsee, “Change in High Field Q-slope by Baking and Anodizing”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP03, pp. 236-239.
- R. Hettel et al., “Design and Characterization of the SSRL Orbit Feedback System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1580-1583.
- F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
- A. Burger and E. Peterson, “U.S. Industrial Fabrication of a 5-Cell Superconducting Radio Frequency (SCRF) Cavity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH164, pp. 1166-1168.
- Ch. Wang et al., “Commissioning Experience of Superconducting Radio Frequency Systems for the Taiwan Light Source”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THYMA03, pp. 549-553.
- W. Corbett et al., “Status of Digital Orbit Feedback for SPEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP094L, pp. 1931-1936.
- X. P. Ding et al., “Gallium as a Possible Target Material for a Muon Collider or Neutrino Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC044, pp. 232-234.
- A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 432-434.
- H. R?Âcken et al., “Progress at Varian's Superconducting Cyclotrons: A Base for the ProBeamTM Platform”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT012, pp. 55-57.
- I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 554-557.
- J. J. Sebek, W. J. Corbett, S. M. Gierman, X. Huang, J. A. Safranek, and K. Tian, “Diagnostics for Physics Applications at SPEAR3”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG018, pp. 65-67.
- M. Omet et al., “Development of FPGA-based Predistortion-type Linearization Algorithms for Klystrons within Digital LLRF Control Systems for ILC-like Electron Accelerators”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP130, pp. 1162-1164.
- Y. Goren and D. Yu, “CONDOR Simulation of an 11.4GHz Traveling Wave Output Cavity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 813-816.
- J. R. Boyce et al., “Linac-Ring Colliders with High Disruption Parameters-A First Test of Principle”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3264-3267.
- T. Wakasa et al., “High Resolution WS Beam Line at RCNP”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-17, pp. XX-XX.
- T. Nakamoto et al., “Development of Superconducting Combined Function Magnets for the Proton Transport Line for the J-PARC Neutrino Experiments”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAA006, pp. 495-499.
- J. Bailey, J. Kuchar, F. Marti, J. Yurkon, J. A. Nolen, and D. Rifuggiato, “Selection and Measurement of RF Phase Width of the K1200 Cyclotron Beam”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXB-04, pp. 431-434.
Back to search