Favourites
For Word
[n] A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Measurement of Betatron Function at the Photon Factory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1272-1275.
[n] A. Miyazaki, K. Fransson, K. J. Gajewski, L. Hermansson, and J. M. Y. Ruber, “First Vertical Test of a Prototype Crab Cavity for HL-LHC at FREIA Laboratory in Uppsala University”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 313. doi:10.18429/JACoW-SRF2021-MOPFAV004
[n] P. Craievich et al., “Fermi Low-energy Transverse RF Deflector Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC080, pp. 1239-1241.
[n] J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
[n] P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3195-3197. doi:10.18429/JACoW-IPAC2016-THOBB02
[n] M. Scholz and B. Beutner, “Electron Beam Phase Space Tomographie at the European XFEL Injector”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 515-518. doi:10.18429/JACoW-FEL2015-TUP068
[n] D. Gonnella et al., “Dependence of Surface Resistance on N-Doping Level”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2331-2334. doi:10.18429/JACoW-IPAC2016-WEPMR027
[n] Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
[n] B. Zhang et al., “Commissioning of a laser wire profile monitor prototype at CSNS”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 338-342. doi:10.18429/JACoW-IBIC2025-TUPCO02
[n] V. Chouhan et al., “Recent Development in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THBA02, pp. 1024-1030.
[n] W. R. Fowkes et al., “1.2 MW Klystron for Asymmetric Storage Ring B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAE07, pp. 1497-1499.
[n] C. T. Rogers, “Statistical Weighting of the MICE Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC088, pp. 1260-1262.
[n] M. Katoh, A. Araki, Y. Hori, T. Kasuga, and Y. Kobayashi, “The Proposed Low Emittance Lattice for the PF Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 636-639.
[n] H. Jiang, L. Lai, Q. Yan, Z. Tang, Z. Xu, and S. Wang, “Development of analog front-end module for the BPM signal processor at SSRF”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 690-693. doi:10.18429/JACoW-IBIC2025-WEPCO29
[n] H. Bohlen et al., “Operating Results for the PEP-II 1.2 MW Klystron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP086L, pp. 2155-2160.
[n] H. A. Day et al., “Beam Coupling Impedance Simulations of the LHC TCTP Collimators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR070, pp. 3090-3092.
[n] H. Ito, A. Araki, K. Umemori, and K. Takahashi, “Systematic Investigation of Mid-T Furnace Baking for High-Q Performance”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 881. doi:10.18429/JACoW-SRF2021-FROFDV01
[n] R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268. doi:10.18429/JACoW-SRF2021-MOPCAV006
[n] S. Eylon, E. Henestroza, and F. Deadrick, “K+ Diode for the LLNL Heavy Ion Recirculator Accelerator Experiment”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA02, pp. 905-907.
[n] S. Teixeira Lopez et al., “A Seamless Quarter-wave Resonator for HIE-ISOLDE”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 686-691. doi:10.18429/JACoW-SRF2017-WEYA03
[n] Y. I. Ida et al., “Study on Vertical Electro-Polishing by Cathode With Variable-Geometry Wings”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP052, pp. 530-536.
[n] E. Bouquerel et al., “Design of a Beamline from CYRC?® for Radiobiological Experiments”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 359-362. doi:10.18429/JACoW-Cyclotrons2016-THP24
For LaTeX
Use Complete Form
For BibTeX
References
- A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Measurement of Betatron Function at the Photon Factory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1272-1275.
- A. Miyazaki, K. Fransson, K. J. Gajewski, L. Hermansson, and J. M. Y. Ruber, “First Vertical Test of a Prototype Crab Cavity for HL-LHC at FREIA Laboratory in Uppsala University”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 313.
- P. Craievich et al., “Fermi Low-energy Transverse RF Deflector Cavity”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC080, pp. 1239-1241.
- J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
- P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3195-3197.
- M. Scholz and B. Beutner, “Electron Beam Phase Space Tomographie at the European XFEL Injector”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 515-518.
- D. Gonnella et al., “Dependence of Surface Resistance on N-Doping Level”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2331-2334.
- Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
- B. Zhang et al., “Commissioning of a laser wire profile monitor prototype at CSNS”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 338-342.
- V. Chouhan et al., “Recent Development in Vertical Electropolishing”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THBA02, pp. 1024-1030.
- W. R. Fowkes et al., “1.2 MW Klystron for Asymmetric Storage Ring B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAE07, pp. 1497-1499.
- C. T. Rogers, “Statistical Weighting of the MICE Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC088, pp. 1260-1262.
- M. Katoh, A. Araki, Y. Hori, T. Kasuga, and Y. Kobayashi, “The Proposed Low Emittance Lattice for the PF Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 636-639.
- H. Jiang, L. Lai, Q. Yan, Z. Tang, Z. Xu, and S. Wang, “Development of analog front-end module for the BPM signal processor at SSRF”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 690-693.
- H. Bohlen et al., “Operating Results for the PEP-II 1.2 MW Klystron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP086L, pp. 2155-2160.
- H. A. Day et al., “Beam Coupling Impedance Simulations of the LHC TCTP Collimators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR070, pp. 3090-3092.
- H. Ito, A. Araki, K. Umemori, and K. Takahashi, “Systematic Investigation of Mid-T Furnace Baking for High-Q Performance”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 881.
- R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268.
- S. Eylon, E. Henestroza, and F. Deadrick, “K+ Diode for the LLNL Heavy Ion Recirculator Accelerator Experiment”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA02, pp. 905-907.
- S. Teixeira Lopez et al., “A Seamless Quarter-wave Resonator for HIE-ISOLDE”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 686-691.
- Y. I. Ida et al., “Study on Vertical Electro-Polishing by Cathode With Variable-Geometry Wings”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP052, pp. 530-536.
- E. Bouquerel et al., “Design of a Beamline from CYRC?® for Radiobiological Experiments”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 359-362.
Back to search