JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Baboi et al., “Optimization of Beam Injection into the First Accelerating Module at TTF with Cavity Dipole Mode Signals”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM019, pp. XX-XX. 
[n]	A. P. Shishlo, S. M. Cousineau, V. V. Danilov, S. Henderson, J. A. Holmes, and M. A. Plum, “Electron Cloud Self-consistent Simulations for the SNS Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH025, pp. 2832-2834. 
[n]	Y. Chen et al., “Space-Charge Dominated Photoemission in High Gradient Photocathode RF Guns”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 941-944. doi:10.18429/JACoW-LINAC2018-THPO116
[n]	J. L. Mi et al., “RHIC Gamma Transition Jump Power Supply Prototype Test”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH022, pp. 1279-1281. 
[n]	F. Bordry, S. Baird, K. Foraz, A.-L. Perrot, R. I. Saban, and J. Ph. G. L, “The First Long Shutdown (LS1) for the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOZB202, pp. 44-48. 
[n]	M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 841-843. doi:10.18429/JACoW-IPAC2015-MOPHA028
[n]	V. Alberti and G. Brajnik, “Usability Recommendations for the SKA Control Room Obtained by a User-Centred Design Approach”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1084-1090. doi:10.18429/JACoW-ICALEPCS2017-THAPL03
[n]	S. M. Liuzzo et al., “ESRF-EBS Lattice Model with Canted Beamlines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4081-4083. doi:10.18429/JACoW-IPAC2018-THPMF019
[n]	S. Krinsky, “Physics and Technology Challenges of Ultra Low Emittance Synchrotron Light Sources”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 11-16. 
[n]	A. Apollonio et al., “Reliability Approach for Machine Protection Design in Particle Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI045, pp. 3388-3390. 
[n]	W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784. 
[n]	R. Bruce, R. W. Assmann, W. Herr, and D. Wollmann, “Calculation Method for Safe Beta* in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ013, pp. 1828-1830. 
[n]	G. Bisoffi, V. Andreev, E. Bissiato, A. Pisent, A. Schiavinato, and T. Shirai, “Study of a Novel Superconducting Structure for the Very Low Beta Part of High Current Linacs”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO021, pp. 2208-2210. 
[n]	Y. Arakita et al., “KEK Fast Cycling Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1554-1557. 
[n]	T. Mey et al., “Measurement of Wigner Distribution Function for Beam Characterization of FELs”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO57, pp. 92-96. 
[n]	R. Lambiase, “Application of the Superconducting Power Cables in the RHIC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP06F, pp. 2068-2069. 
[n]	G. Brajnik, S. Bassanese, G. Cautero, S. Cleva, and R. De Monte, “Integration of a Pilot-Tone Based BPM System Within the Global Orbit Feedback Environment of Elettra”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 190-195. doi:10.18429/JACoW-IBIC2018-TUOC01
[n]	W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 575-578. 
[n]	J. J. Yang, H. J. Yao, and T. J. Zhang, “Physics Problem Study For A 100 MeV, 500 Microamp H- Beam Compact Cyclotron”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TH2IODN04, pp. 224-228. 
[n]	R. E. Potts, W. Blokland, S. M. Cousineau, and J. A. Holmes, “Observations of Coupling During Accumulation Using a Non-Destructive Electron Scanner in the Spallation Neutron Source Accumulator Ring”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 351-356. doi:10.18429/JACoW-HB2016-TUPM9Y01
[n]	P. Cameron et al., “Design and Testing of the MIT-Bates Stern-Gerlach Polarimeter Cavity”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper CTMM01, pp. XX-XX. 
[n]	K. Saito, “State-of-the-Art and Future Prospects in RF Superconductivity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOYBP01, pp. 11-15. 
[n]	S. Pei et al., “Progress on the Beam Dynamics Studies for the ADS Injector I and the Main Linac”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper FRAMH4, pp. 124-126. 
[n]	A. V. Fedotov, I. Ben-Zvi, D. Kayran, E. Pozdeyev, A. O. Sidorin, and A. V. Smirnov, “High-Energy Electron Cooling Based on Realistic Six-Dimensional Distribution of Electrons”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS093, pp. 3699-3701. 
[n]	H. J. Yao, X. Guan, G. R. Li, X. W. Wang, Q. Zhang, and S. X. Zheng, “RF-Knockout Slow Extraction Design for XiPAF Synchrotron”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 52-54. doi:10.18429/JACoW-HB2016-MOPR005
[n]	E. I. Simakov et al., “Results of the New High Power Tests of Superconducting Photonic Band Gap Structure Cells”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC33, pp. 850-852. 
[n]	H. Winick, “Overview of Synchrotron Radiation Facilities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 7-12. 
[n]	S. P. Chia, S. P. Moo, and D. A. Bradley, “Accelerator-Related Research Activities in Malaysia”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4B002, pp. 28-31. 
[n]	G. R. White, Y. Cai, R. O. Hettel, M. A. G. Johansson, V. Yakimenko, and G. Yocky, “A Compact 335 MeV Positron Damping Ring Design for FACET-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3652-3655. doi:10.18429/JACoW-IPAC2017-THOBA3
[n]	H. Timko, P. Baudrenghien, E. N. Shaposhnikova, and T. Mastoridis, “Studies on Controlled RF Noise for the LHC”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO4LR03, pp. 414-418. 
[n]	J. D. Gilpatrick and C. A. Watson, “Reconstruction of Longitudinal Beam Profiles from Nondestructive Electromagnetic Probes”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1965-1967. 
[n]	T. R. Edgecock et al., “The EMMA Non-scaling FFAG”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC090, pp. 4266-4268. 
[n]	B. Aune et al., “Superconducting RF Activities at Saclay”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-49, pp. 432-433. 
[n]	P. Balleyguier, H. Borrion, D. Deslandes, and Ph. Guimbal, “A High Dynamic-Range Beam Position Measurement System for  ELSA-2”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB022, pp. 2458-2460. 
[n]	J. Laskar, L. Nadolski, D. S. Robin, and C. Steier, “Lattice Model Calibration and Frequency Map Measurements at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A15, pp. 1077-1079. 
[n]	R. B. Palmer, “Design of Superconducting Magnets for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 32-37. 
[n]	G. Khatri, J. Cenede, A. Frassier, and G. Tranquille, “A Test Bench for Characterizing Electron Cooler Components at up to -80 kVDC”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 61-64. doi:10.18429/JACoW-COOL2023-THPOSRP06
[n]	S. Pei, C. Adolphsen, K. L. F. Bane, Z. Li, and J. C. Smith, “TTF HOM Data Analysis with Curve Fitting Method”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC076, pp. 1227-1229. 
[n]	F. Alessandria et al., “Status Report on the Heavy Ion Facility at LNS”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-18, pp. 90-94. 
[n]	S. Matsumoto, H. Baba, K. Mikawa, T. Sueno, and M. Toda, “New Multi-Microprocessor Control System of the Main Ring Magnet  Power Supply for the KEK 12 GeV  PS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 689-692. 
[n]	M. Cavenago et al., “Metal Vapour Production for ECR Ion Sources”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1424-1427. 
[n]	C. Carli et al., “Schottky Based Intensity Measurements and Errors Due to Statistical Fluctuations”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 385-388. doi:10.18429/JACoW-IPAC2017-MOPAB112
[n]	L. Thorndahl, “Stochastic Cooling of Bunched Ions Simulated in the Time Domain”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper TUAM1HA03, pp. 49-51. 
[n]	K. Akai, N. Akasaka, K. Ebihara, E. Ezura, M. Suetake, and S. Yoshimoto, “The Low-Level RF System for KEKB”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP10G, pp. 1749-1751. 
[n]	W.-D. M?Âller, “High Power Coupler for the TESLA Test Facility”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA010, pp. 577-581. 
[n]	S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “The New Design for Capture Cavity of CEBAF”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3955-3957. doi:10.18429/JACoW-IPAC2014-THPRI080
[n]	J. Joo, D. Jeon, M. J. Joung, Y. Jung, H. J. Kim, and M. Lee, “Surface Treatment Facilities for SCRF Cavities at RISP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP084, pp. 619-621. 
[n]	W. Bartmann et al., “Impact of LHC and SPS Injection Kicker Rise Times on Lhc Filling Schemes and Luminosity Reach”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2043-2046. doi:10.18429/JACoW-IPAC2017-TUPVA007
[n]	B. Goddard et al., “Optimization of Diffuser (Pre-Scatterer) Configurations for Slow Extraction Loss Reduction at Electrostatic Septa”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 830-833. doi:10.18429/JACoW-IPAC2018-TUPAF053
[n]	F. R??diger, W. Goettmann, M. Koerfer, G. Schmidt, and K. Wille, “Beam Loss Position Monitoring with Optical Fibres at DELTA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOCM03, pp. 1032-1034. 
[n]	V. V. Danilov et al., “Laser Stripping of H- beams: Theory and Experiments”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THYKI02, pp. 2582-2586. 
[n]	R. L. Lillestol et al., “Status of Wakefield Monitor Experiments at the CLIC Test Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2099-2101. doi:10.18429/JACoW-IPAC2016-WEOBB02
[n]	J. Qiang and B. Li, “Suppression of Microbunching Instability Through Dispersive Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3325-3328. doi:10.18429/JACoW-IPAC2019-WEPTS090
[n]	H. Tomizawa, H. Dewa, H. Hanaki, A. Mizuno, and T. Taniuchi, “Review of Manipulation Laser Technology on 3D-Pulse-Shape & Polarization for the Conventional Photocathode RF Gun and the Future Z-polarization Schottky Emission Gun”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH024, pp. 289-293. 
[n]	A. M. Porcellato et al., “On Line Performance and Upgrading of ALPI Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP010, pp. 174-178. 
[n]	N. V. Mokhov et al., “Energy Deposition Studies for the Hi-Lumi LHC Inner Triplet Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1078-1080. doi:10.18429/JACoW-IPAC2014-TUPRO028
[n]	C. Wang et al., “A Study of Multipacting Effects in Large Cyclotron Cavities by Means of Fully 3-Dimensional Simulations”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU2PB01, pp. 142-146. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search