JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Srivastava, Y. Kumar, A. Misra, V. S. Pandit, S. Sahoo, and S. K. Thakur, “A Control Strategy for Highly Regulated Magnet Power Supplies Using a LQR Approach”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC117, pp. 1334-1336. 
[n]	T. Tanaka et al., “In-situ Magnetic Correction for Cryogenic Undulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD026, pp. 3147-3149. 
[n]	Z. Mart?¡, G. Benedetti, M. Carl?á, and A. Olmos, “First Turn-by-turn Measurements for Beam Dynamics Studies at ALBA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1171-1173. doi:10.18429/JACoW-IPAC2014-TUPRO060
[n]	S. S. Kurennoy, A. J. Jason, and H. M. Miyadera, “Large-Acceptance Linac for Accelerating Low-Energy Muons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE075, pp. 3518-3520. 
[n]	J. Y. Li, B. Jia, S. F. Mikhailov, V. Popov, Y. K. Wu, and S. Huang, “Manipulating the FEL gain process with an In-cavity Aperture System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP153, pp. 2405-2407. 
[n]	M. Klein and R. Nagaoka, “Multibunch Tracking Code Development to Account for Passive Landau Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO003, pp. 885-887. 
[n]	T. Hardek, W. Kells, and H. Lai, “Very Low Intensity Storage-Ring Profile Monitor”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2219-2222. 
[n]	P. Sp?ñdtke, H. Emig, K. D. Leible, C. M??hle, H. Reich, and B. H. Wolf, “Ion Sources for the New High Current Injector at GSI”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4052, pp. 884-886. 
[n]	T. Goetsch, J. Feikes, M. Ries, and G. Wuestefeld, “A Robinson Wiggler Proposal for the Metrology Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2001-2003. doi:10.18429/JACoW-IPAC2014-WEPRO028
[n]	V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX. 
[n]	L. Lu et al., “High Power Test of the LEAF-RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 808-810. doi:10.18429/JACoW-LINAC2018-THPO052
[n]	M. Dehler and A. Anghel, “Comparative Studies of Electron Sources for a Free Electron Laser at PSI”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA036, pp. 157-159. 
[n]	J. P. Ozelis, C. Grenoble, R. Nehring, and T. Powers, “RF and Data Acquisition Systems for Fermilab's ILC SRF Cavity Vertical Test Stand”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN107, pp. 2286-2288. 
[n]	J. Conrad, R. Eichhorn, T. Kuerzeder, A. Richter, and S. T. Sievers, “Component Qualification and Final Assembly of the S-DALINAC Injector Upgrade Module”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC003, pp. 2206-2208. 
[n]	A. V. Ziiatdinova, L. Bellan, M. Comunian, and A. Pisent, “Primary Beam Dynamic Simulation of Double Drift Double Buncher System for SPES Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 117-119. doi:10.18429/JACoW-LINAC2016-MOPRC020
[n]	Y. Cho, R. J. Holt, H. E. Jackson, T. K. Khoe, and G. S. Mavrogenes, “A Conceptual Design of a Linac-Stretcher Ring to Obtain a 2-GeV Continuous Electron Beam”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2119-2122. 
[n]	M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184. 
[n]	J.-P. Carneiro et al., “Transmission Efficiency Measurement at the FNAL 4-rod RFQ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP050, pp. 168-170. 
[n]	M. A. Fraser et al., “Experimental Results of Crystal-Assisted Slow Extraction at the SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 623-626. doi:10.18429/JACoW-IPAC2017-MOPIK048
[n]	B. S. Wang et al., “ALGORITHM AND CIRCUIT TO IMPROVE ZERO-CROSSING STABILITY OF BIPOLAR TPS TRIM COIL POWER SUPPLY”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3206-3208. doi:10.18429/JACoW-IPAC2015-WEPHA041
[n]	J. S. Kolski, R. J. Macek, and R. C. McCrady, “Orbit Response Matrix Measurements in the Los Alamos Proton Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP012, pp. 4332-4334. 
[n]	S. F. Mikhailov, J. Y. Li, V. Popov, and Y. K. Wu, “Experience of FEL Mirror Degradation at the Duke FEL and HIGS Facility”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP155, pp. 2408-2410. 
[n]	T.-C. Yu et al., “A Novel Planar Balun Structure for Continuous Wave 1 kW, 500 MHz Solid-state Amplifier Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD075, pp. 2699-2701. 
[n]	P. Beasley and O. Heid, “Progress Towards A Novel Compact High Voltage Electrostatic Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP207, pp. 1876-1878. 
[n]	Y.-C. Chien et al., “Status of AC Power Supplies for TPS Booster Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3203-3205. doi:10.18429/JACoW-IPAC2015-WEPHA040
[n]	Y. T. Li, C. Y. Liu, and K.-B. Liu, “Inrush Current Suppression Scheme of Hot Swap Power Modules”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3200-3202. doi:10.18429/JACoW-IPAC2015-WEPHA039
[n]	B. Bartova et al., “Characterization of Nb Coating in HIE-ISOLDE QWR Superconducting Accelerating Cavities by means of SEM-FIB and TEM”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3155-3158. doi:10.18429/JACoW-IPAC2015-WEPHA022
[n]	A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093. 
[n]	P. Li, L. J. Mao, J. W. Xia, J. C. Yang, D. Y. Yin, and Y. J. Yuan, “Simulation Study of Transverse Spectrum in HIRFL-CSR”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP130, pp. 1722-1724. 
[n]	Y. S. Wong, Y.-C. Chien, C. Y. Liu, K.-B. Liu, and B. S. Wang, “DESIGN STORAGE RING AND BOOSTER RING POWER SUPPLY CABLING IN TAIWAN PHOTON SOURCE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3194-3196. doi:10.18429/JACoW-IPAC2015-WEPHA037
[n]	C. Y. Liu, Y.-C. Chien, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Upgrading the Performance of the Power Supply for the TPS Booster Dipole Magnets”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3197-3199. doi:10.18429/JACoW-IPAC2015-WEPHA038
[n]	S. Maier et al., “Design Considerations of the Corrugated Structures in a Vacuum Chamber for Impedance Studies at KARA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 100-104. doi:10.18429/JACoW-IBIC2022-MOP27
[n]	R. Assmann et al., “Design Status of the CLIC 3-TeV Beam Delivery System and Damping Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A20, pp. 522-526. 
[n]	A.-S. M??ller, S. Casalbuoni, M. Fitterer, E. Huttel, Y.-L. Mathis, and M. T. Schmelling, “Modeling the Shape of Coherent THz Pulses Emitted by Short Bunches in an Electron Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC047, pp. 2094-2096. 
[n]	V. Ranjbar et al., “Spin Coupling Resonance Study in AGS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE050, pp. 356-358. 
[n]	E. Bjorklund and S. A. Baily, “Tailoring the Hardware to Your Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THAAUST01, pp. 1171-1173. 
[n]	S. M. Polozov, V. S. Dyubkov, A. S. Panishev, and V. L. Shatokhin, “Vacuum Condition Simulations for Vacuum Chambers of Synchrotron Radiation Source”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 358-360. doi:10.18429/JACoW-RuPAC2021-WEPSC08
[n]	M. E. Angoletta et al., “A Leading-Edge Hardware Family for Diagnostics Applications and Low-Level RF in CERN's ELENA Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF28, pp. 575-578. 
[n]	G. Burtin, R. J. Colchester, G. Ferioli, J. J. Gras, R. Jung, and J. M. Vouillot Geneva, “Adaptive Optics for the LEP 2 Synchrotron Light Monitors”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT08, pp. XX-XX. 
[n]	D. E. Johnson, G. Goderre, B. Hendricks, R. P. Johnson, and R. Joshel, “Control of the Time and Energy Dependent Parameters of the Upgraded Tevatron Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1296-1299. 
[n]	I. Birkel, E. Huttel, A.-S. Muller, and P. Wesolowski, “Investigation of Machine Operation and Related Radiation Dose at the ANKA Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN022, pp. 197-199. 
[n]	D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1158-1161. 
[n]	A. V. Bubley et al., “Commissioning of the 60 keV Electron Cooler for the NICA Booster”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 453-455. doi:10.18429/JACoW-RUPAC2016-WEPSB040
[n]	P. A. G?Ârgen, O. Boine-Frankenheim, and W. Fischer, “Beam-beam Effect on the BTF in Bunched Beams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3011-3013. doi:10.18429/JACoW-IPAC2014-THPRO060
[n]	T. Hoffmann, H. Br?ñuning, R. Haseitl, and G. Jansa, “FESA Based Data Acquisition for Beam Diagnostics at GSI”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL010, pp. 47-49. 
[n]	A. D. Stepanov, R. C. Davidson, E. P. Gilson, and L. Grisham, “Studies of Ion Beam Charge Neutralization by Ferroelectric Plasma Sources”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC24, pp. 499-501. 
[n]	A. V. Samoshin and S. M. Polozov, “Development of Proton Therapy at the SC Linac with BEAMDULAC-SCL Code”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB070, pp. 633-635. 
[n]	W. Lu et al., “Development Update of the LECR4 Ion Source - Dragon at IMP”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP13, pp. 133-135. 
[n]	S. Guha, T. K. Bhaumik, C. Mallik, and P. Y. Nabhiraj, “Design and Implementation of an IEEE 802.15.4/ZigBee based Star Network for Data Acquisition and Monitoring”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD12, pp. 160-162. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search