Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239.
[n] D. P. Rusthoi, P. Allison, and K. R. Crandall, “Accelerator Column Models for Low-Current Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2585-2588.
[n] B. Koubek, A. Schempp, J. S. Schmidt, and J. Haeuser, “RF Setup of the MedAustron RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB014, pp. 35-37.
[n] S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
[n] J. Borburgh, T. Fowler, A. Prost, T. Kramer, and T. Stadlbauer, “Design of Electrostatic Septa and Fast Deflector for MedAustron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS048, pp. 3532-3534.
[n] T. Kramer et al., “Delivery of Special Magnets for the MedAustron Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3403-3405. doi:10.18429/JACoW-IPAC2014-THPME072
[n] J. Jacob et al., “Commissioning and Operation of One Booster and Two Storage Ring RF Acceleration Units at the ESRF”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1182-1185.
[n] P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 210-213. doi:10.18429/JACoW-SRF2019-MOP061
[n] A. Gottstein, E. Kasanda, I. Mateu, L. Eggimann, and S. Braccini, “Upgraded beam profile monitoring using Chromox and fiber optic imaging for high-radiation environments”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 499-502. doi:10.18429/JACoW-IBIC2025-TUPMO16
[n] M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
[n] A. Schempp, “Field Stabilization of RFQ Structures”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0007, pp. 338-341.
[n] M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2101-2104. doi:10.18429/JACoW-IPAC2017-TUPVA023
[n] D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 607-610.
[n] R. T. Dowd and Y. E. Tan, “Beam Based Sextupole Alignment Studies for Coupling Control at the ASLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC001, pp. 1995-1997.
[n] A. Brandelik et al., “First Operation of a Superconducting Proton Accelerator”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper E01, pp. 93-97.
[n] N. Delerue et al., “First Measurements of Coherent Smith-Purcell Radiation in the SOLEIL Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 69-71. doi:10.18429/JACoW-IPAC2016-MOPMB002
[n] N. Delerue et al., “Simulations of the Acceleration of Externally Injected Electrons in a Plasma Excited in the Linear Regime”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2542-2544. doi:10.18429/JACoW-IPAC2016-WEPMY003
[n] O. R. Sander, F. O. Purser, and D. P. Rusthoi, “Operational Parameters of a 2.0 MeV RFQ”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0004, pp. 54-55.
[n] M. Vieille Grosjean et al., “Reconstruction of Longitudinal Electrons Bunch Profiles at FACET, SLAC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3453-3455. doi:10.18429/JACoW-IPAC2014-THPME093
[n] M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
[n] L. Liu et al., “Status of SIRIUS operation with users”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2586-2589. doi:10.18429/JACoW-IPAC2023-WEOGA2
[n] R. Maier, S. Martin, D. Prasuhn, O. W. B. Schult, and I. Zychor, “Beam Parameters at the Internal Target Positions for Experiments in COSY-Juelich”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP104G, pp. 1429-1431.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239.
- D. P. Rusthoi, P. Allison, and K. R. Crandall, “Accelerator Column Models for Low-Current Beams”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2585-2588.
- B. Koubek, A. Schempp, J. S. Schmidt, and J. Haeuser, “RF Setup of the MedAustron RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB014, pp. 35-37.
- S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
- J. Borburgh, T. Fowler, A. Prost, T. Kramer, and T. Stadlbauer, “Design of Electrostatic Septa and Fast Deflector for MedAustron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS048, pp. 3532-3534.
- T. Kramer et al., “Delivery of Special Magnets for the MedAustron Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3403-3405.
- J. Jacob et al., “Commissioning and Operation of One Booster and Two Storage Ring RF Acceleration Units at the ESRF”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1182-1185.
- P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 210-213.
- A. Gottstein, E. Kasanda, I. Mateu, L. Eggimann, and S. Braccini, “Upgraded beam profile monitoring using Chromox and fiber optic imaging for high-radiation environments”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 499-502.
- M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
- A. Schempp, “Field Stabilization of RFQ Structures”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0007, pp. 338-341.
- M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2101-2104.
- D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 607-610.
- R. T. Dowd and Y. E. Tan, “Beam Based Sextupole Alignment Studies for Coupling Control at the ASLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC001, pp. 1995-1997.
- A. Brandelik et al., “First Operation of a Superconducting Proton Accelerator”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper E01, pp. 93-97.
- N. Delerue et al., “First Measurements of Coherent Smith-Purcell Radiation in the SOLEIL Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 69-71.
- N. Delerue et al., “Simulations of the Acceleration of Externally Injected Electrons in a Plasma Excited in the Linear Regime”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2542-2544.
- O. R. Sander, F. O. Purser, and D. P. Rusthoi, “Operational Parameters of a 2.0 MeV RFQ”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0004, pp. 54-55.
- M. Vieille Grosjean et al., “Reconstruction of Longitudinal Electrons Bunch Profiles at FACET, SLAC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3453-3455.
- M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
- L. Liu et al., “Status of SIRIUS operation with users”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGA2, pp. 2586-2589.
- R. Maier, S. Martin, D. Prasuhn, O. W. B. Schult, and I. Zychor, “Beam Parameters at the Internal Target Positions for Experiments in COSY-Juelich”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP104G, pp. 1429-1431.
Back to search