Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Roderick, R. Billen, and D. D. Teixeira, “Instrumentation of the CERN Accelerator Logging Service: Ensuring Performance, Scalability, Maintenance and Diagnostics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHAUST06, pp. 1232-1235.
[n] P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037.
[n] K. Cornelis, W. Herr, and R. Schmidt, “Multicycling of the CERN-SPS: Supercycle Generation and First Experience with this Mode of Operation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1372-1375.
[n] M. Ferrario and L. Serafini, “Multibunch Beam Dynamics in a Superconducting Linac Injector”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-61, pp. 508-510.
[n] M. Koujili et al., “Test Measurements of a 20 m/s Carbon Wire Beam Scanner”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD64, pp. 452-454.
[n] D. Quartullo, J. Repond, and M. Migliorati, “Comparison of Different Methods to Calculate Induced Voltage in Longitudinal Beam Dynamics Codes”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4465-4468. doi:10.18429/JACoW-IPAC2017-THPVA022
[n] T.-Y. Chung, C.-H. Lee, C.-S. Hwang, H.-W. Luo, and S. Sasaki, “Synchrotron radiation properties of elliptically polarized undulator with a transverse field gradient”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM105, unpublished.
[n] T. Planche et al., “3-D Magnetic Calculation Methods for Spiral Scaling FFAG Magnet Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN007, pp. 1401-1403.
[n] S. Littleton, “Field-adapted coordinate transformations for rotating and accelerating beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3260-3262. doi:10.18429/JACoW-IPAC2023-WEPL067
[n] R. Klein et al., “Accurate Measurement of the MLS Electron Storage Ring Parameters”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 600-603. doi:10.18429/JACoW-IBIC2016-WECL02
[n] M. Yamada et al., “Development of Modulating Permanent Magnet Sextupole Lens for Focusing of Cold Neutrons”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC164, pp. 2392-2394.
[n] P. A. P. Nghiem, “On the (Apparent) Paradox between Space-Charge Forces and Space-Charge Effects”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2268-2271. doi:10.18429/JACoW-IPAC2022-WEPOMS016
[n] A. Mosnier et al., “Superconducting RF Activities at SACLAY : Status Report”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A08, pp. XX-XX.
[n] Y. Iwashita et al., “Beam Test Plan of Permanent Magnet Quadrupole Lens at ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE017, pp. 3380-3382.
[n] T. Liu, B. Liu, D. Wang, T. Zhang, Z. Huang, and J. S. Liu, “Beam Transport Line of the LPA-FEL Facility Based on Transverse Gradient Undulator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3287-3290. doi:10.18429/JACoW-IPAC2016-THPMB027
[n] F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
[n] L. N. Drosdal et al., “Beam Stability and Tail Population at SPS Scrapers”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP247, pp. 166-169.
[n] T. Kikuchi, N. Harada, T. Sasaki, H. Tamukai, and T. Katayama, “Beam Dynamics Simulation on Simultaneous use of Stochastic Cooling and Electron Cooling with Internal Target”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS004, pp. 3433-3435.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Roderick, R. Billen, and D. D. Teixeira, “Instrumentation of the CERN Accelerator Logging Service: Ensuring Performance, Scalability, Maintenance and Diagnostics”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHAUST06, pp. 1232-1235.
- P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037.
- K. Cornelis, W. Herr, and R. Schmidt, “Multicycling of the CERN-SPS: Supercycle Generation and First Experience with this Mode of Operation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1372-1375.
- M. Ferrario and L. Serafini, “Multibunch Beam Dynamics in a Superconducting Linac Injector”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-61, pp. 508-510.
- M. Koujili et al., “Test Measurements of a 20 m/s Carbon Wire Beam Scanner”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD64, pp. 452-454.
- D. Quartullo, J. Repond, and M. Migliorati, “Comparison of Different Methods to Calculate Induced Voltage in Longitudinal Beam Dynamics Codes”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4465-4468.
- T.-Y. Chung, C.-H. Lee, C.-S. Hwang, H.-W. Luo, and S. Sasaki, “Synchrotron radiation properties of elliptically polarized undulator with a transverse field gradient”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM105, unpublished.
- T. Planche et al., “3-D Magnetic Calculation Methods for Spiral Scaling FFAG Magnet Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN007, pp. 1401-1403.
- S. Littleton, “Field-adapted coordinate transformations for rotating and accelerating beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL067, pp. 3260-3262.
- R. Klein et al., “Accurate Measurement of the MLS Electron Storage Ring Parameters”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 600-603.
- M. Yamada et al., “Development of Modulating Permanent Magnet Sextupole Lens for Focusing of Cold Neutrons”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC164, pp. 2392-2394.
- P. A. P. Nghiem, “On the (Apparent) Paradox between Space-Charge Forces and Space-Charge Effects”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2268-2271.
- A. Mosnier et al., “Superconducting RF Activities at SACLAY : Status Report”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89A08, pp. XX-XX.
- Y. Iwashita et al., “Beam Test Plan of Permanent Magnet Quadrupole Lens at ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE017, pp. 3380-3382.
- T. Liu, B. Liu, D. Wang, T. Zhang, Z. Huang, and J. S. Liu, “Beam Transport Line of the LPA-FEL Facility Based on Transverse Gradient Undulator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3287-3290.
- F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
- L. N. Drosdal et al., “Beam Stability and Tail Population at SPS Scrapers”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP247, pp. 166-169.
- T. Kikuchi, N. Harada, T. Sasaki, H. Tamukai, and T. Katayama, “Beam Dynamics Simulation on Simultaneous use of Stochastic Cooling and Electron Cooling with Internal Target”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS004, pp. 3433-3435.
Back to search