Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. D. Yang et al., “Control of Cyclotron Vertical Deflector for Proton Therapy”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO016, pp. 95-98. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO016
[n] A. Mosnier and E. Klein, “Feasibility Study of a Combined Neutron Centre for European Research and Technology”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC009, pp. 742-744.
[n] S. Fartoukh and J.-B. Jeanneret, “Using Microwave Quadrupoles to Shorten the CLIC Beam Delivery Section”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B15, pp. 480-482.
[n] B. Yu. Bogdanovich, V. I. Kaminsky, E. S. Masunov, A. V. Nesterovich, and S. Korenev, “Conception of Electron Linac with Regulation of Main Parameters for Radiation Technologies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH038, pp. 2530-2532.
[n] S. Latushkin, V. Rezvov, V. Unezhev, and L. Yudin, “WIDE-APERTURE NONINTERCEPTING IONIZATION SENSOR FOR CYCLOTRON BEAM CROSS-SECTION CONTROL”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP09, pp. XX-XX.
[n] D. R. Machen and L. R. Biswell, “A Standard Interface Concept for Computer-Controlled Particle Accelerators”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 363-365.
[n] J. Sauza-Bedolla et al., “Preserving Micron Tolerances Through the Assembly Process of an X-band Accelerating Structure”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 377-379. doi:10.18429/JACoW-LINAC2018-TUPO023
[n] J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
[n] Y. Dutheil et al., “Gamma Factory at CERN: Design of a Proof-of-Principle Experiment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 685-688. doi:10.18429/JACoW-IPAC2019-MOPRB052
[n] B. Cox, P. O. Mazur, and A. Van Ginneken, “Sensitivity of an Energy Doubler Dipole to Beam Induced Quenches”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3885-3888.
[n] E. A. Knapp and D. A. Swenson, “The PIGMI Program at LASL”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D09, pp. 230-233.
[n] T. Buller, “Design of High Average Power Linear Electron Accelerator Sections”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 231-234.
[n] T. Toyama et al., “Beam Position Monitor for the J-PARC Main Ring Synchrotron”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW013, pp. XX-XX.
[n] H. Huang et al., “Proton Emittance Measurements in the Brookhaven AGS”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF01, pp. 492-494.
[n] M. Marchetto, “Performances of the ISAC Heavy Ion Linacs”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TH-04, pp. 160-164.
[n] J. D. Jarvis et al., “Field-Emission Cathodes for Free-Electron Lasers”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEOA04, pp. 466-469.
[n] S. Tripathi, V. Gupta, J. Hussain, and G. Mishra, “Three-Frequency Undulator Radiation and Free-Electron Laser Gain”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC18, pp. 79-82.
[n] J. Johnson, G. D. Craig, and J. F. DeFord, “Modeling Ferrite Electromagnetic Response in the Time-Domain”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1184-1187.
[n] D. Leitner et al., “Commissioning Results of the ReA RFQ at MSU”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP226, pp. 1912-1914.
[n] A. Blednykh et al., “Performance Strategy for the First Years of the EIC Science Program”, presented at the IPAC'26, Deauville, France, May 2026, paper WEO1T02, unpublished.
[n] C. Compton et al., “Fabrication Efforts Toward a Superconducting Rf Photo-Infector Quarter-Wave Cavity for Use in Low Emittance Injector Applications”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 568-572. doi:10.18429/JACoW-SRF2023-TUPTB063
[n] A. P. Lee et al., “The NSRRC Photo-injector Diagnostic Tools for Initial Beam Test”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 179-183. doi:10.18429/JACoW-IBIC2015-MOPB055
[n] R. Schöder, H.-W. Glock, J. Knobloch, and A. Velez, “Mid-T-Baking of SRF cavities driven by RF power”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7025, unpublished.
[n] B. Yu Bogdanovich, A. V. Nesterovich, and A. V. Shalnov, “Linear and Circular Acceleration of the Electron-Ion Beams”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 626-628.
[n] W. J. Gallagher, “Space Charge Defocussing of Bunched Beams”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 607-612.
[n] N. Eddy et al., “Beam Instrumentation Data Acquisition Using Gigabit Ethernet Communication Protocol”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP11, unpublished.
[n] M. V. Fazio and R. F. Hoeberling, “Experimental Progress on Virtual Cathode Very, High Power, Microwave Source Development”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1821-1824.
[n] S. R. Tiwari et al., “Power Supplies for INDUS-1”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D065, pp. 558-560.
[n] V. Petrenko and N. A. Chernoplekov, “Some Aspects of Photonuclear Reaction Applications in Radiation Technologies”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2630-2633.
[n] J. Divitcos, M. De Jonge, D. Howard, and J. McKinlay, “Milliprobe Scanner Station”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 93-95. doi:10.18429/JACoW-MEDSI2016-MOPE38
[n] C. D. Curtis, “Injection into FFAG Accelerators”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 9-01, pp. 288-300.
[n] G. N. Kulipanov et al., “MARS: Fourth Generation X-Ray Light Source Based on Multiturn Energy-Recovery Linac”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THXCH01, pp. 123-125.
[n] H. K. Kuhn and J. D. Pahud, “The Control Systems for the CERN Super Proton Synchrotron Ring Power Supplies”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3102-3105.
[n] J. B. Pearson et al., “Progress Towards Extraction of an Intense H- Beam from TRIUMF”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1269-1272.
[n] C. M. Warsop, D. J. Adams, and K. Tilley, “Developments and Plans for Diagnostics on the ISIS Synchrotron”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT06, pp. XX-XX.
[n] H. Henschel Euskirchen, M. K?Ârfer Hamburg, and F. Wulf Hahn-Meitner Institut, “Fibre Optical Radiation Sensing System for TESLA”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT04, pp. XX-XX.
[n] D. Padrazo, B. Bacha, Y. Hu, I. Pinayev, and G. M. Wang, “NSLS-II Beam Intensity Measurement”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG004, pp. 26-28.
[n] R. Klein, G. Brandt, D. Herzog, and R. Thornagel, “Accurate Measurement of Small Electron Beam Currents at the MLS Electron Storage Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF34, pp. 903-906.
[n] T. I. Parker and P. C. Peck, “Greening for Bosons”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT5A3, pp. 54-58.
[n] O. Chubar, A. Snigirev, S. Kuznetsov, T. Weitkamp Grenoble, and V. Kohn, “X-Ray Interference Methods of Electron Beam Diagnostics”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT09, pp. XX-XX.
[n] J. A. Fasolo, C. D. Curtis, and G. M. Lee, “Duoplasmatron Source Performance at MURA”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-04, pp. 371-382.
[n] S. Li et al., “LCLS Injector Laser Profile Shaping Using Digital Micromirror Device”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1001-1004. doi:10.18429/JACoW-NAPAC2016-WEPOB49
[n] G. P. Benincasa, A. Daneels, P. Heymans, and Ch. Serre, “Engineering a Large Application Software Project: The Controls of the CERN PS Accelerator Complex”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2029-2032.
[n] J. Belorgey et al., “Field Quality of LHC/Saclay Arc Quadrupole Magnet Prototype”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP008G, pp. 2225-2227.
[n] J. J. Olcese and W. J. Gallagher, “Prebunching with Space Charge”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 895-898.
[n] D. Johnson et al., “Magnetic Field of the K800 Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1261-1264.
[n] V. Tympel et al., “Comparative Measurement and Characterisation of Three Cryogenic Current Comparators Based on Low-Temperature Superconductors”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 126-129. doi:10.18429/JACoW-IBIC2018-MOPC06
[n] J. D. Gilpatrick et al., “Beam-Profile Instrumentation for a Beam-Halo Measurement: Overall Description, Operation, and Beam Data”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT05, pp. XX-XX.
[n] M. L. Sundquist et al., “Operation of a 3 MeV Ampere Intensity DC Electron Recirculation System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 316-319.
[n] P. H. Debenham, S. S. Bruce, S. Penner, and M. A. D. Wilson, “The Injection Chicane of the NBS-Los Alamos Racetrack Microtron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1452-1455.
[n] I. Ben-Zvi et al., “Status of the Stony Brook Superconducting Heavy-Ion Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3488-3491.
[n] L. Serafini and C. Pagani, “Analytical Scaling Laws and Main Guide-Lines for the Design of RF Gun Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-67, pp. 799-801.
[n] T. Wijnands, C. Pignard, R. Rausch, and A. Tsoulou, “Radiation Constraints in the Design and Conception of LHC Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU101, pp. XX-XX.
[n] C. Uden, A. Huschauer, H. Pahl, M. Schenk, N. Madysa, and V. Kain, “Multi-objective extremum seeking to control drifts in the transverse beam splitting efficiency of the multi-turn extraction at the CERN proton synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1675-1678. doi:10.18429/JACoW-IPAC2023-TUPA159
[n] M. Gasior, “Faraday Cup Award: High Sensitivity Tune Measurement using Direct Diode Detection”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOAP02, pp. XX-XX.
[n] G. P. Averyanov, V. A. Budkin, A. V. Kobylyatskiy, and I. O. Osadchuk, “The Intelligent Object-oriented Interface in the Design Environment of The Charged Particles Relativistic Beams Transport Channels”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 358-360. doi:10.18429/JACoW-RUPAC2016-WEPSB004
[n] J. D. Gilpatrick et al., “Proposed Beam Diagnostics Instrumentation for the LANSCE Refurbishment Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS051, pp. 4099-4101.
[n] R. Galiana, “The Proton Source for the Improved CERN Synchrocyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H06, pp. XX-XX.
[n] N. V. Mokhov and A. Van Ginneken, “Muons versus Hadrons for Radiotherapy”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP118, pp. 2525-2527.
[n] T. Kuo et al., “Injection Study for High Current H- Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper E-03, pp. 381-384.
[n] W. J. Gallagher, “The Transient Response of a Microwave Cavity”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4277-4280.
[n] R. Baartman, “Invited Paper: Intensity Limitations in Compact H Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-02, pp. 440-445.
[n] E. Weihreter et al., “A 7T Multipole Wiggler in BESSY II: Implementation and Commissioning Results”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF012, pp. 324-326.
[n] C. D. Curtis and G. M. Lee, “Preaccelerator Column Design”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-5, pp. 487-496.
[n] R. I. Cutler, D. L. Mohr, J. K. Whittaker, and N. R. Yoder, “A High Resolution Wire Scanner Beam Profile Monitor with a Microprocessor Data Acquisition System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2213-2216.
[n] K.-G. Rensfelt et al., “DESIREE - A Double Electrostatic Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT124, pp. 1425-1427.
[n] N. Ayala, A. Ferrero Colomo, and T. Kramer, “Design, Construction and Testing of a Magnetic Probe for Fast Kicker Magnets”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3510-3513. doi:10.18429/JACoW-IPAC2021-WEPAB347
[n] D. Neuffer and A. Van Ginneken, “High Frequency Bunching and φ-δE Rotation for a Muon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH162, pp. 2029-2031.
[n] I. V. Sideris, “Characterization of the Chaotic or Regular Nature of Dynamical Orbits: A New, Fast Method”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE036, pp. 2449-2451.
[n] M. Wendt Hamburg, “BPM Read-Out Electronics Based on the Broadband AM/PM Normalization Schema”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT01, pp. XX-XX.
[n] O. A. Waldner et al., “Linear Resonant Accelerators for Industrial Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2613-2616.
[n] S. Khan et al., “Results from the Optical Replica Experiments at FLASH”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THBAU04, pp. 497-500.
[n] C. D. Curtis et al., “Operation of NAL Linac at Energies to 139 MeV”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper C-3, pp. 217-238.
[n] J. Kidd et al., “A High Intensity Beam Dump for the Tevatron Beam Abort System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2774-2777.
[n] M. P. Kelly, K. W. Shepard, M. Kedzie, J. D. Fuerst, and S. Sharamentov, “Microphonics Measurements in RIA Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP29, pp. 690-692.
[n] S. Liu, N. Eddy, B. FELLENZ, and A. Semenov, “Development of BPM electronics for PIP-II at Fermilab”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 139-142. doi:10.18429/JACoW-IBIC2025-MOPCO31
[n] J. W. No?® et al., “RF Superconductivity Research and Development at Stony Brook”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B07, pp. XX-XX.
[n] P. Kuske et al., “Experience with the Beam Position Monitor System of the BESSY II Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA84, pp. 2078-2080.
[n] D. Leitner et al., “Status of the ReAccelerator Facility R?A for Rare Isotopes Beam”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THIOB03, pp. 674-679.
[n] R. Risler, S. Brossard, J. Eenmaa, I. Kalet, and P. Wootton, “Two Years of Operating Experience with the Seattle Clinical Neutron Therapy Facility”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-24, pp. 682-684.
[n] K. Bertsche, “Optimal Placement of Profile Monitors in a Mismatched FODO Lattice”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ21, pp. 2503-2505.
[n] M. A. D. Wilson, “Recirculation Acceleration of High Current Relativistic Electron Beams- A Feasibility Study”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3375-3378.
[n] B. Mustapha, J. Nolen, A. Barcikowski, R. Gampa, and G. Savard, “A Pulsed Wien Filter as a Low-Energy Kicker”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM090, unpublished.
[n] J. F. DeFord, G. D. Craig, and R. McLeod, “The AMOS (Azimuthal Mode Simulator) Code”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1181-1184.
[n] F. P?®rez et al., “3HC - Third Harmonic Normal Conducting Active Cavity Collaboration Between HZB, DESY and ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1471-1474. doi:10.18429/JACoW-IPAC2022-TUPOMS028
[n] R. L. Cady, “The LAMPF 805 MHz RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2946-2949.
[n] B. Mustapha, B. Back, C. R. Hoffman, B. P. Kay, J. A. Nolen, and P. N. Ostroumov, “An In-flight Radioactive Ion Separator Design for the ATLAS Facility”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP004, pp. 446-448.
[n] W. Mexner, E. Iurchenko, H. Pasic, D. Ressmann, and T. Spangenberg, “A New Flexible Integration of NeXus Datasets to ANKA by Fuse File Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC008, pp. 566-569.
[n] J. J. Olcese and W. J. Gallagher, “Properties of Contoured Cavities”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 957-960.
[n] R. E. Laxdal, G. H. Mackenzie, and L. Root, “Beam Test Results Using the Auxiliary Accelerating Cavity”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-07, pp. 442-445.
For LaTeX
Use Complete Form
For BibTeX
References
- F. D. Yang et al., “Control of Cyclotron Vertical Deflector for Proton Therapy”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO016, pp. 95-98.
- A. Mosnier and E. Klein, “Feasibility Study of a Combined Neutron Centre for European Research and Technology”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC009, pp. 742-744.
- S. Fartoukh and J.-B. Jeanneret, “Using Microwave Quadrupoles to Shorten the CLIC Beam Delivery Section”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B15, pp. 480-482.
- B. Yu. Bogdanovich, V. I. Kaminsky, E. S. Masunov, A. V. Nesterovich, and S. Korenev, “Conception of Electron Linac with Regulation of Main Parameters for Radiation Technologies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH038, pp. 2530-2532.
- S. Latushkin, V. Rezvov, V. Unezhev, and L. Yudin, “WIDE-APERTURE NONINTERCEPTING IONIZATION SENSOR FOR CYCLOTRON BEAM CROSS-SECTION CONTROL”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP09, pp. XX-XX.
- D. R. Machen and L. R. Biswell, “A Standard Interface Concept for Computer-Controlled Particle Accelerators”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 363-365.
- J. Sauza-Bedolla et al., “Preserving Micron Tolerances Through the Assembly Process of an X-band Accelerating Structure”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 377-379.
- J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
- Y. Dutheil et al., “Gamma Factory at CERN: Design of a Proof-of-Principle Experiment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 685-688.
- B. Cox, P. O. Mazur, and A. Van Ginneken, “Sensitivity of an Energy Doubler Dipole to Beam Induced Quenches”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3885-3888.
- E. A. Knapp and D. A. Swenson, “The PIGMI Program at LASL”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D09, pp. 230-233.
- T. Buller, “Design of High Average Power Linear Electron Accelerator Sections”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 231-234.
- T. Toyama et al., “Beam Position Monitor for the J-PARC Main Ring Synchrotron”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW013, pp. XX-XX.
- H. Huang et al., “Proton Emittance Measurements in the Brookhaven AGS”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF01, pp. 492-494.
- M. Marchetto, “Performances of the ISAC Heavy Ion Linacs”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TH-04, pp. 160-164.
- J. D. Jarvis et al., “Field-Emission Cathodes for Free-Electron Lasers”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEOA04, pp. 466-469.
- S. Tripathi, V. Gupta, J. Hussain, and G. Mishra, “Three-Frequency Undulator Radiation and Free-Electron Laser Gain”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC18, pp. 79-82.
- J. Johnson, G. D. Craig, and J. F. DeFord, “Modeling Ferrite Electromagnetic Response in the Time-Domain”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1184-1187.
- D. Leitner et al., “Commissioning Results of the ReA RFQ at MSU”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP226, pp. 1912-1914.
- A. Blednykh et al., “Performance Strategy for the First Years of the EIC Science Program”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEO1T02, this conference.
- C. Compton et al., “Fabrication Efforts Toward a Superconducting Rf Photo-Infector Quarter-Wave Cavity for Use in Low Emittance Injector Applications”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB063, pp. 568-572.
- A. P. Lee et al., “The NSRRC Photo-injector Diagnostic Tools for Initial Beam Test”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 179-183.
- R. Schöder, H.-W. Glock, J. Knobloch, and A. Velez, “Mid-T-Baking of SRF cavities driven by RF power”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7025, this conference.
- B. Yu Bogdanovich, A. V. Nesterovich, and A. V. Shalnov, “Linear and Circular Acceleration of the Electron-Ion Beams”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 626-628.
- W. J. Gallagher, “Space Charge Defocussing of Bunched Beams”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 607-612.
- N. Eddy et al., “Beam Instrumentation Data Acquisition Using Gigabit Ethernet Communication Protocol”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP11, unpublished.
- M. V. Fazio and R. F. Hoeberling, “Experimental Progress on Virtual Cathode Very, High Power, Microwave Source Development”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1821-1824.
- S. R. Tiwari et al., “Power Supplies for INDUS-1”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D065, pp. 558-560.
- V. Petrenko and N. A. Chernoplekov, “Some Aspects of Photonuclear Reaction Applications in Radiation Technologies”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2630-2633.
- J. Divitcos, M. De Jonge, D. Howard, and J. McKinlay, “Milliprobe Scanner Station”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 93-95.
- C. D. Curtis, “Injection into FFAG Accelerators”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 9-01, pp. 288-300.
- G. N. Kulipanov et al., “MARS: Fourth Generation X-Ray Light Source Based on Multiturn Energy-Recovery Linac”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THXCH01, pp. 123-125.
- H. K. Kuhn and J. D. Pahud, “The Control Systems for the CERN Super Proton Synchrotron Ring Power Supplies”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3102-3105.
- J. B. Pearson et al., “Progress Towards Extraction of an Intense H- Beam from TRIUMF”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1269-1272.
- C. M. Warsop, D. J. Adams, and K. Tilley, “Developments and Plans for Diagnostics on the ISIS Synchrotron”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT06, pp. XX-XX.
- H. Henschel Euskirchen, M. K?Ârfer Hamburg, and F. Wulf Hahn-Meitner Institut, “Fibre Optical Radiation Sensing System for TESLA”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT04, pp. XX-XX.
- D. Padrazo, B. Bacha, Y. Hu, I. Pinayev, and G. M. Wang, “NSLS-II Beam Intensity Measurement”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG004, pp. 26-28.
- R. Klein, G. Brandt, D. Herzog, and R. Thornagel, “Accurate Measurement of Small Electron Beam Currents at the MLS Electron Storage Ring”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF34, pp. 903-906.
- T. I. Parker and P. C. Peck, “Greening for Bosons”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT5A3, pp. 54-58.
- O. Chubar, A. Snigirev, S. Kuznetsov, T. Weitkamp Grenoble, and V. Kohn, “X-Ray Interference Methods of Electron Beam Diagnostics”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT09, pp. XX-XX.
- J. A. Fasolo, C. D. Curtis, and G. M. Lee, “Duoplasmatron Source Performance at MURA”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VII-04, pp. 371-382.
- S. Li et al., “LCLS Injector Laser Profile Shaping Using Digital Micromirror Device”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1001-1004.
- G. P. Benincasa, A. Daneels, P. Heymans, and Ch. Serre, “Engineering a Large Application Software Project: The Controls of the CERN PS Accelerator Complex”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2029-2032.
- J. Belorgey et al., “Field Quality of LHC/Saclay Arc Quadrupole Magnet Prototype”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP008G, pp. 2225-2227.
- J. J. Olcese and W. J. Gallagher, “Prebunching with Space Charge”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 895-898.
- D. Johnson et al., “Magnetic Field of the K800 Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1261-1264.
- V. Tympel et al., “Comparative Measurement and Characterisation of Three Cryogenic Current Comparators Based on Low-Temperature Superconductors”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 126-129.
- J. D. Gilpatrick et al., “Beam-Profile Instrumentation for a Beam-Halo Measurement: Overall Description, Operation, and Beam Data”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT05, pp. XX-XX.
- M. L. Sundquist et al., “Operation of a 3 MeV Ampere Intensity DC Electron Recirculation System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 316-319.
- P. H. Debenham, S. S. Bruce, S. Penner, and M. A. D. Wilson, “The Injection Chicane of the NBS-Los Alamos Racetrack Microtron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1452-1455.
- I. Ben-Zvi et al., “Status of the Stony Brook Superconducting Heavy-Ion Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3488-3491.
- L. Serafini and C. Pagani, “Analytical Scaling Laws and Main Guide-Lines for the Design of RF Gun Cavities”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-67, pp. 799-801.
- T. Wijnands, C. Pignard, R. Rausch, and A. Tsoulou, “Radiation Constraints in the Design and Conception of LHC Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU101, pp. XX-XX.
- C. Uden, A. Huschauer, H. Pahl, M. Schenk, N. Madysa, and V. Kain, “Multi-objective extremum seeking to control drifts in the transverse beam splitting efficiency of the multi-turn extraction at the CERN proton synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA159, pp. 1675-1678.
- M. Gasior, “Faraday Cup Award: High Sensitivity Tune Measurement using Direct Diode Detection”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOAP02, pp. XX-XX.
- G. P. Averyanov, V. A. Budkin, A. V. Kobylyatskiy, and I. O. Osadchuk, “The Intelligent Object-oriented Interface in the Design Environment of The Charged Particles Relativistic Beams Transport Channels”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 358-360.
- J. D. Gilpatrick et al., “Proposed Beam Diagnostics Instrumentation for the LANSCE Refurbishment Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS051, pp. 4099-4101.
- R. Galiana, “The Proton Source for the Improved CERN Synchrocyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69H06, pp. XX-XX.
- N. V. Mokhov and A. Van Ginneken, “Muons versus Hadrons for Radiotherapy”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP118, pp. 2525-2527.
- T. Kuo et al., “Injection Study for High Current H- Cyclotrons”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper E-03, pp. 381-384.
- W. J. Gallagher, “The Transient Response of a Microwave Cavity”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4277-4280.
- R. Baartman, “Invited Paper: Intensity Limitations in Compact H Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-02, pp. 440-445.
- E. Weihreter et al., “A 7T Multipole Wiggler in BESSY II: Implementation and Commissioning Results”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF012, pp. 324-326.
- C. D. Curtis and G. M. Lee, “Preaccelerator Column Design”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-5, pp. 487-496.
- R. I. Cutler, D. L. Mohr, J. K. Whittaker, and N. R. Yoder, “A High Resolution Wire Scanner Beam Profile Monitor with a Microprocessor Data Acquisition System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2213-2216.
- K.-G. Rensfelt et al., “DESIREE - A Double Electrostatic Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT124, pp. 1425-1427.
- N. Ayala, A. Ferrero Colomo, and T. Kramer, “Design, Construction and Testing of a Magnetic Probe for Fast Kicker Magnets”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3510-3513.
- D. Neuffer and A. Van Ginneken, “High Frequency Bunching and φ-δE Rotation for a Muon Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH162, pp. 2029-2031.
- I. V. Sideris, “Characterization of the Chaotic or Regular Nature of Dynamical Orbits: A New, Fast Method”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE036, pp. 2449-2451.
- M. Wendt Hamburg, “BPM Read-Out Electronics Based on the Broadband AM/PM Normalization Schema”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT01, pp. XX-XX.
- O. A. Waldner et al., “Linear Resonant Accelerators for Industrial Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2613-2616.
- S. Khan et al., “Results from the Optical Replica Experiments at FLASH”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THBAU04, pp. 497-500.
- C. D. Curtis et al., “Operation of NAL Linac at Energies to 139 MeV”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper C-3, pp. 217-238.
- J. Kidd et al., “A High Intensity Beam Dump for the Tevatron Beam Abort System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2774-2777.
- M. P. Kelly, K. W. Shepard, M. Kedzie, J. D. Fuerst, and S. Sharamentov, “Microphonics Measurements in RIA Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP29, pp. 690-692.
- S. Liu, N. Eddy, B. FELLENZ, and A. Semenov, “Development of BPM electronics for PIP-II at Fermilab”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 139-142.
- J. W. No?® et al., “RF Superconductivity Research and Development at Stony Brook”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B07, pp. XX-XX.
- P. Kuske et al., “Experience with the Beam Position Monitor System of the BESSY II Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA84, pp. 2078-2080.
- D. Leitner et al., “Status of the ReAccelerator Facility R?A for Rare Isotopes Beam”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THIOB03, pp. 674-679.
- R. Risler, S. Brossard, J. Eenmaa, I. Kalet, and P. Wootton, “Two Years of Operating Experience with the Seattle Clinical Neutron Therapy Facility”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-24, pp. 682-684.
- K. Bertsche, “Optimal Placement of Profile Monitors in a Mismatched FODO Lattice”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ21, pp. 2503-2505.
- M. A. D. Wilson, “Recirculation Acceleration of High Current Relativistic Electron Beams- A Feasibility Study”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3375-3378.
- B. Mustapha, J. Nolen, A. Barcikowski, R. Gampa, and G. Savard, “A Pulsed Wien Filter as a Low-Energy Kicker”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM090, unpublished.
- J. F. DeFord, G. D. Craig, and R. McLeod, “The AMOS (Azimuthal Mode Simulator) Code”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1181-1184.
- F. P?®rez et al., “3HC - Third Harmonic Normal Conducting Active Cavity Collaboration Between HZB, DESY and ALBA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1471-1474.
- R. L. Cady, “The LAMPF 805 MHz RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2946-2949.
- B. Mustapha, B. Back, C. R. Hoffman, B. P. Kay, J. A. Nolen, and P. N. Ostroumov, “An In-flight Radioactive Ion Separator Design for the ATLAS Facility”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP004, pp. 446-448.
- W. Mexner, E. Iurchenko, H. Pasic, D. Ressmann, and T. Spangenberg, “A New Flexible Integration of NeXus Datasets to ANKA by Fuse File Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC008, pp. 566-569.
- J. J. Olcese and W. J. Gallagher, “Properties of Contoured Cavities”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 957-960.
- R. E. Laxdal, G. H. Mackenzie, and L. Root, “Beam Test Results Using the Auxiliary Accelerating Cavity”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXB-07, pp. 442-445.
Back to search