JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. M. Dykes and D.S.G. Higgins, “Possible Cavity Construction Techniques for the DIAMOND Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ18, pp. 1762-1764. 
[n]	A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800. 
[n]	D. Filippetto et al., “Status of Thomson Source at SPARC/PLASMONX”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP074, pp. 1257-1259. 
[n]	K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033. 
[n]	C. Pellegrini, “Overview of Single Pass Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper FRYBPA01, pp. 3636-3640. 
[n]	B. Salvant et al., “Beam Induced RF Heating in LHC in 2015”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 602-605. doi:10.18429/JACoW-IPAC2016-MOPOR008
[n]	R. M. Jones, T. Higo, Y. Higashi, J. W. Wang, R. H. Miller, and N. M. Kroll, “Local and Fundamental Mode Coupler Damping of the Transverse Wakefield in RDDS1 Linacs”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA09, pp. 395-397. 
[n]	L. N. S. Thompson et al., “Synchrotron Radiation Studies for a Ring-Ring LHeC Interaction Region and Long Straight Section”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC039, pp. 1248-1250. 
[n]	T. Fujita et al., “Long-Term Stability of the Beam Position Monitors at SPring-8”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 359-363. doi:10.18429/JACoW-IBIC2015-TUPB020
[n]	K. Nakao et al., “Analysis on Variation Factors of Optical Power at the LEBRA FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC75, pp. 675-677. 
[n]	M. Zhang, R. B. Deng, D. Gu, Q. Gu, D. Huang, and Z. Wang, “Beam Stability Modeling and Jitter Control for SXFEL Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1513-1516. doi:10.18429/JACoW-IPAC2017-TUPAB084
[n]	F. Demurtas et al., “Experimental characterization of the timing-jitter effects on a beam-driven plasma wakefield accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 553-556. doi:10.18429/JACoW-IPAC2024-MOPR43
[n]	P. Schoessow et al., “Analysis of High Repetition Rate Effects in Dielectric Wakefield Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC12, pp. 93-95. 
[n]	M. Tigner, “Is There a Future for High Energy Accelerators?”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3931-3934. 
[n]	D. P. Gurd, “Accelerator Control and Global Networks - State of the Art”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper FR201, pp. 847-851. 
[n]	P. Krejcik et al., “Commissioning the New LCLS X-band Transverse Deflecting Cavity with Femtosecond Resolution”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUAL2, pp. 308-311. 
[n]	R. R?ícz, S. Biri, and J. Palinkas, “An ECR Table Plasma Generator”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT005, pp. 124-126. 
[n]	K. Endo, T. Igarashi, T. Kasuga, M. Kihara, and E. Takasaki, “Modification of LINDA to Treat the Grain Orientation Effect”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 716-719. 
[n]	J. Corlett, L. Doolittle, R. Schoenlein, J. Staples, R. Wilcox, and A. Zholents, “Techniques for Synchronization of X-Ray Pulses to the Pump Laser in an Ultrafast X-Ray Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB001, pp. 2408-2410. 
[n]	I. Hwang, E.-S. Kim, J. Hong, Y. Morozumi, and K. Saito, “Multipacting Study of ICHIRO End Cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP15, pp. XX-XX. 
[n]	M. S. Zisman, “Neutrino Factories and Beta Beams”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper FRXAPA01, pp. 3616-3620. 
[n]	D. T. Abell et al., “Simulation of H- Beam Chopping in a Solenoid-Based Low-Energy Beam Transport (LEBT)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP254, pp. 1957-1959. 
[n]	J. Bridges, Y. W. Kang, R. L. Kustom, and K. Primdahl, “High Power Testing of the Prototype Accelerating Cavity (352 MHz) for the Advanced Photon Source (APS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1254-1257. 
[n]	G. Stupakov and P. Emma, “Reversible Electron Beam Heater without Transverse Deflecting Cavities”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 166-170. doi:10.18429/JACoW-FEL2015-MOP056
[n]	X. Wu et al., “MSU Re-accelerator - the re-acceleration of low energy RIBS at the NSCL”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO304, pp. XX-XX. 
[n]	M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3827-3829. doi:10.18429/JACoW-IPAC2024-THPS41
[n]	J. Tuozzolo, J. Brodowski, G. Danby, J. Jackson, and W. Meng, “Magnets for the National Spallation Neutron Source Accumulator Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P003, pp. 3233-3235. 
[n]	M.-E. Angoletta, “Digital Low Level RF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEXPA03, pp. 1847-1851. 
[n]	M. Frichembruder, R. Pakter, and F. B. Rizzato, “Modeling Coherence Decay in Broad Band Triplet Interaction”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH001, pp. 0-3645. 
[n]	D. Brandt et al., “Orbit Processign for LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1444-1447. 
[n]	C. Vaccarezza et al., “Slice Emittance Measurements at SPARC Photoinjector with a RF Deflector”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC105, pp. 1305-1307. 
[n]	P. K. Saha et al., “Systematic Beam Loss Study due to the Foil Scattering at the 3-GeV RCS of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB018, pp. 3921-3923. 
[n]	A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 358-360. doi:10.18429/JACoW-NAPAC2016-TUPOA36
[n]	M. Tigner, “CESR-B, upgrading the CESR Facility to B-Factory Capability”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 132-135. 
[n]	V. Kapin, “Study of the Four-rod RFQ Using the Normal Mode Theory of Transmission Lines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2191-2194. 
[n]	J. Qiang, J. N. Corlett, P. Emma, C. E. Mitchell, and M. Venturini, “Simulation and Analysis of Microbunching Instability in a High Repetition rate FEL Beam Delivery System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME062, pp. 1709-1711. 
[n]	E. N. Jongewaard et al., “RF Gun Photocathode Research at SLAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP046, pp. 664-666. 
[n]	S.-Y. Chen, E. Dodd, J. K. Kim, A. Maksimchuk, and R. Wagner, “Laser-Driven Plasma-Cathode Electron Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C002, pp. 2657-2661. 
[n]	F.-J. Decker, S. D. Anderson, D. Kharakh, and M. K. Sullivan, “Permanent Magnet Skew Quadrupoles for the Low Emittance LER Lattice of PEP-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC007, pp. 2987-2989. 
[n]	J. M. Weber, C. A. Lionberger, W. E. Norum, G. J. Portmann, C. Serrano, and E. C. Williams, “ALS Timing System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD18, pp. 187-190. 
[n]	A. Zelenski et al., “The RHIC Polarized Source Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOOBA2, pp. 49-51. 
[n]	H. Ishimaru, G. Horikoshi, and Y. Kimura, “New All Aluminum Alloy Vacuum System for the TRISTAN ee- Storage Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3320-3323. 
[n]	H. Koiso, H. Nakayama, K. Oide, and M. Tawada, “Dynamic Aperture with Multipoles of Special Quadrupole Magnets in the KEKB Interaction Region”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V015, pp. 1394-1396. 
[n]	S. Cao et al., “Ultra-high spatial resolution in micron scale achieved by a practical cascade high energy electron radiography in HERPL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1095-1097. doi:10.18429/JACoW-IPAC2025-TUPB057
[n]	M. Ikegami et al., “Recent Progress in Beam Commissioning of J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO030, pp. 3827-3829. 
[n]	Y. C. Chae et al., “A 2-GeV, 1-MW Pulsed Proton Source for a Spallation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP002G, pp. 521-523. 
[n]	M. Merio et al., “Update of SSR2 Cavities Design for Project X and RISP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO057, pp. 2435-2437. 
[n]	G. Ciovati et al., “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT016, pp. XX-XX. 
[n]	T. Honma et al., “Improvements and Applications at NIRS Cyclotron Facility”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-07, pp. XX-XX. 
[n]	K. B. Unser, “Design and Preliminary Tests of a Beam Intensity Monitor for LEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 71-74. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search