JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. J. Kim et al., “Commissioning status of the RAON superconducting accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2192-2194. doi:10.18429/JACoW-IPAC2023-TUPM002
[n]	Y. Nakazawa et al., “Development of an APF IH-DTL in the J-PARC Muon g-2/EDM Experiment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2544-2547. doi:10.18429/JACoW-IPAC2021-WEXB06
[n]	J. F. Power, S. S. Kurennoy, J. F. O'Hara, M. A. Plum, and M. Stettler, “Beam Position Monitors for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH070, pp. 1375-1377. 
[n]	M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 522-524. doi:10.18429/JACoW-LINAC2018-TUPO083
[n]	T. Tolba, E. Baussan, A. Bignami, N. Gazis, F. Sordo Balbin, and E. Trachanas, “ESSnuSB target test facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB033, unpublished. 
[n]	D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879. 
[n]	K. Egawa and M. Masuzawa, “Magnet Field Measurement for KEK B-factory”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP16G, pp. 1948-1950. 
[n]	G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058. 
[n]	I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, R. Wanzenberg, and Y.-C. Chae, “Automatic Tuning of PETRA, its Injector Complex, and Prospects of Autonomous Operation of PETRA IV”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1912-1915. doi:10.18429/JACoW-IPAC2018-WEPAF044
[n]	M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1691-1694. doi:10.18429/JACoW-IPAC2024-TUPS27
[n]	D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327. 
[n]	N. Chaisueb and S. Rimjaem, “Study on Undulator Radiation from Femtosecond Electron Bunches”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 702-706. doi:10.18429/JACoW-FEL2015-WEP062
[n]	W. Habiger, R. Clifford, F. McCullough, and R. Bruce Miller, “EXDEP/CTX-An Explosive Detection System for Screening Luggage with High Energy X-Rays”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2622-2625. 
[n]	S. Cao, L. Lai, J. Chen, and Y. Leng, “BAM system and machine stability at SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4866-4868. doi:10.18429/JACoW-IPAC2023-THPL177
[n]	K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693. 
[n]	M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58. 
[n]	E. D. van Garderen, G. LeBlanc, A. C. Starritt, K. Zingre, and M. L. M. ten Have, “Upgrade of the Timing System at the Australian Synchrotron”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD27, pp. 357-359. 
[n]	A. Toral Diez, S. L. Birch, M. Mansouri, A. Nordt, D. Paulic, and Y. K. Sin, “ESS Accelarator Oxygen Depletion Hazard Detection System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 666-669. doi:10.18429/JACoW-ICALEPCS2017-TUPHA106
[n]	A. S. Tsyganov et al., “Stand for Precision Measurements of Magnetic Lenses Field Quality”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC022, pp. 495-497. 
[n]	M. Dehn, K. Aulenbacher, and P. Plattner, “Unconventional high-voltage insulator in DC photoemission sources”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2083-2085. doi:10.18429/JACoW-IPAC2024-WEPC53
[n]	D. K. Kalantaryan, G. A. Amatuni, P. Beaud, G. Ingold, A. Streun, and V. M. Tsakanov, “Laser -- Beam Interaction and Calculation of the Sliced Bunch Radiation Spectra for the SLS FEMTO Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC026, pp. 2040-2042. 
[n]	A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 299. doi:10.18429/JACoW-MEDSI2020-WEPB16
[n]	Y. Petenev et al., “Precise Measurement of Small Currents at the MLS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 118-121. doi:10.18429/JACoW-IBIC2018-MOPC03
[n]	H. Zyngier, “Low Emittance Photon Beam for a Synchrotron Radiation Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 484-486. 
[n]	J. P. Blewett, “Linacs of the Future”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper I-01, pp. 1-3. 
[n]	R. Bailey, G. Geschonke, E. Keil, M. Lamont, and G. von Holtey, “Studies of Bunch Trains in LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 445-448. 
[n]	J. K. Boyd, G. J. Caporaso, A. G. Cole, and J. T. Weir, “Beam Quality of the ATA Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 925-928. 
[n]	M. Baschke, H. Podlech, and A. Schempp, “A Two-Stage Splitring-RFQ for High Current Ion Beams at Low Frequencies”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 941-942. doi:10.18429/JACoW-IPAC2018-TUPAF087
[n]	J. E. Spencer, “Accelerator Diagnosis and Control by Neural Net”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1642-1645. 
[n]	G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457. 
[n]	J. H. Han et al., “Conditioning and High Power Test of the RF Guns at PITZ”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF026, pp. 357-359. 
[n]	E. Hartwig, “The AEG Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX. 
[n]	R. J. Briggs et al., “Beam Dynamics in the ETA and ATA 10 kA Linear Induction Accelerators-Observations and Issues”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3360-3365. 
[n]	S. Feher et al., “Quench Protection of SC Quadrupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P001, pp. 3389-3391. 
[n]	M. Bickley and K. White, “The Integration of Two Control Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA12, pp. 2220-2222. 
[n]	R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n]	C. D. Moore, R. Coleman, G. Goderre, and M. J. Yang, “Tevatron Extraction Modelling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1498-1501. 
[n]	A. V. Aleksandrov et al., “High-Dynamic-Range Current Measurements in the Medium-Energy Beta Transport Line at the Spallation Neutron Source”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP002, pp. 244-246. 
[n]	R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757. 
[n]	E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636. 
[n]	F.-J. Decker, J. T. Seeman, and R. Brown, “Beam Size Measurements with Noninterceptive Off-Axis Screens”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2507-2510. 
[n]	R. N. Litunovsky and V. Nikolaev, “Central Region of 240 - cm Variable Energy Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-004, pp. XX-XX. 
[n]	S. Sierra et al., “LCLSII Fundamental Power Coupler Manufacturing Status and Lesson Learned”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 893-894. doi:10.18429/JACoW-LINAC2018-THPO092
[n]	F. Varela et al., “TIP: An Umbrella Application for all SCADA-Based Applications for the CERN Technical Infrastructure”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 184-187. doi:10.18429/JACoW-ICALEPCS2015-MOPGF039
[n]	C. Sibley, “Machine Protection Strategies for High Power Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB001, pp. 607-611. 
[n]	J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 690-693. doi:10.18429/JACoW-FEL2015-WEP058
[n]	J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461. 
[n]	P. Alvarez, J. C. Bau, S. Deghaye, I. Kozsar, J. Serrano, and J. H. Lewis, “The CERN LHC Central Timing, a Vertical Slice”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOAA03, pp. 711-713. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search