Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Trbojevic et al., “NS-FFAG for Electron-Ion Collider in RHIC (eRHIC)”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA13, pp. 553-555.
[n] H. Ishimaru, Z. Igarashi, H. Nishimura, and S. Shibata, “Beam Size Measurement of 12 GeV Accelarator by Fast Rotary Scraper”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3358-3361.
[n] R. Dei-Cas, “Review of High-Brightness Electron Guns”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 109-114.
[n] T. Matsumoto et al., “Digital Low-Level RF Control System with Four Intermediate Frequencies at STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP081, pp. 2198-2200.
[n] M. T. Gundogan, O. Yavas, A. A. Aydin, E. Kasap, and C. Kaya, “Design, Production and Tests of Button Type BPM for TAC-TARLA IR FEL Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 27-30. doi:10.18429/JACoW-IBIC2016-MOPG01
[n] L. Calabretta et al., “Beam-Chopping System for LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-34, pp. 275-278.
[n] R. M. Franks, K. Hernandez, D. Otting, T. Henderson, D. Plate, and R. A. Rimmer, “Mechanical Design and Fabrication Processes for the ALS Third-Harmonic Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP61, pp. 803-805.
[n] T. Naito and T. M. Mitsuhashi, “Improvement of the Resolution of SR Interferometer at KEK-ATF Damping Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE009, pp. 972-974.
[n] P. Ilinski, “Residual Gas X-ray Beam Position Monitor for PETRA-III”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOCNB03, pp. 53-57.
[n] C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 157-159. doi:10.18429/JACoW-ICALEPCS2015-MOPGF029
[n] B. Aune et al., “Superconducting RF Activities at Saclay”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-49, pp. 432-433.
[n] F. Peters, I. Hartl, C. Mohr, and L. Winkelmann, “OPC UA to DOOCS Bridge: A Tool for Automated Integration of Industrial Devices Into the Accelerator Control Systems at FLASH and European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 344-347. doi:10.18429/JACoW-ICALEPCS2017-TUMPA05
[n] J. Xu, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “Highly Scalable Numerical Methods for Simulation of Space Charge Dominated Beams”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IOPK02, pp. 12-17.
[n] M. Schaumann et al., “First Partially Stripped Ions in the LHC (208Pb????)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 689-692. doi:10.18429/JACoW-IPAC2019-MOPRB055
[n] R. Tomas, M. Aiba, R. Calaga, A. Morita, and G. Vanbavinckhove, “Optics Correction in the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP025, pp. 2572-2574.
[n] L. Calabretta et al., “Invited Paper: Commissioning of the K800 INFN Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-02, pp. 12-19.
[n] S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “The New Design for Capture Cavity of CEBAF”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3955-3957. doi:10.18429/JACoW-IPAC2014-THPRI080
[n] W. Bartmann et al., “Impact of LHC and SPS Injection Kicker Rise Times on Lhc Filling Schemes and Luminosity Reach”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2043-2046. doi:10.18429/JACoW-IPAC2017-TUPVA007
[n] G. M. wang et al., “Experimental Progress of DC-SC Photoinjector at Peking University”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP048, pp. XX-XX.
[n] Y. X. Zhang et al., “Research on Secondary Electron Emission Characteristics of Diamond-like Carbon Thin Films”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1306-1308. doi:10.18429/JACoW-IPAC2019-TUPMP031
[n] S. Nath and G. Neuschaefer, “Longitudinal Tune-Up of the SSC Drift-Tube and Coupled Cavity Linac Sections”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 485-488.
[n] E. F. Valderrama et al., “Mo-Re Films for SRF Applications”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO077, pp. 930-935.
[n] J. Boyd, “Fast All-Metal Six-Inch Valve”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 743-746.
[n] A. Mosnier et al., “Superconducting RF Activities at SACLAY : Status Report”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A08, pp. XX-XX.
[n] D. Mascali et al., “Innovative Schemes of Plasma Heating for Future Multiply-Charged Ions Sources: Modeling and Experimental Investigation”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 14-17. doi:10.18429/JACoW-ECRIS2016-MOCO01
[n] T. Miura et al., “Evaluation of LLRF Stabilities at STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP084, pp. 2207-2209.
[n] Y. Zhao, J. S. Cao, J. He, Y. F. Sui, and L. Wang, “Heating Analysis and the Solutions of DCCT System for BEPCII”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 92-94. doi:10.18429/JACoW-IBIC2015-MOPB025
[n] A. K. ?çift?ºi, R. ?çift?ºi, and F. Zimmermann, “Deflecting Synchrotron Radiation from the Interaction Region of a Linac-Ring LHeC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB043, pp. 1623-1625.
[n] R. B. Palmer et al., “Cooling Scheme for a Muon Collider”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUM2I06, pp. 77-81.
[n] S. Michizono et al., “Vector-Sum Control of Superconducting RF Cavities at STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP083, pp. 2204-2206.
[n] M. Bickley, J. Chen, and C. Larrieu, “EPICS Tools Enhancements and Transportability”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP36, pp. 741-743.
[n] J. Casey, M. P. J. Gaudreau, M. A. Kempkes, and J. M. Mulvaney, “Solid-State High Voltage Pulse Modulators for High Power Microwave Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A07, pp. 2361-2363.
[n] Z. H. Bai and L. Wang, “Super-Period Multi-Bend Achromat Lattice with Interleaved Dispersion Bumps for the HALS Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3597-3599. doi:10.18429/JACoW-IPAC2018-THPAK147
[n] P. Ilinski, “NSLS-II X-ray Diagnostics Development”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP199, pp. 468-470.
[n] F.-J. Decker et al., “Two-Color Self-seeding and Scanning the Energy of Seeded Beams at LCLS”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO09, pp. 514-517.
[n] G. Kube, H. Backe, W. Lauth, and H. Sch?Âpe, “Smith-Purcell Radiation in View of Particle Beam Diagnostics”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper IT09, pp. XX-XX.
[n] S. P. Weathersby, M. Kosovsky, N. Kurita, A. Novokhatski, and J. Seeman, “A Proposal for a New HOM Absorber in a Straight Section of the PEP-II Low Energy Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP031, pp. 2173-2175.
[n] P. G. O'Shea et al., “The University of Maryland Electron Ring (UMER)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA008, pp. 159-163.
[n] A. Koschik et al., “Gantry 3: Further Development of the PSI PROSCAN Proton Therapy Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2275-2277. doi:10.18429/JACoW-IPAC2015-TUPWI016
[n] M. Aiba et al., “Study of Beam Based Alignment and Orbit Feedback for SwissFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPA08, pp. 588-591.
[n] S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 438-441. doi:10.18429/JACoW-SRF2023-TUPTB024
[n] T. Momose, H. Hirayama, H. Ishimaru, and O. Kon, “New Concept for Radiation Absorbers in TRISTAN Accumulation Ring (TAR)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1344-1347.
[n] M. K. Kim, J. S. Hong, and T. H. Tak, “The Implementation of KSTAR Fast Interlock System using C-RIO”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 337-340. doi:10.18429/JACoW-ICALEPCS2017-TUMPA03
[n] H. Chen, C.-X. Tang, and Y. H. Liu, “Low-Energy Linacs and Their Applications in Tsinghua University”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP007, pp. 256-258.
[n] G.-T. Park, F. Fors, J. Guo, R. A. Rimmer, H. Wang, and S. Wang, “The Development of a New Fast Harmonic Kicker for the JLEIC Circulator Cooling Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1171-1173. doi:10.18429/JACoW-IPAC2018-TUPAL068
[n] J. M. Byrd et al., “Femtosecond Synchronization of Laser Systems for the LCLS”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOCNB04, pp. 58-62.
[n] J. J. Tan, Z. H. Bai, W. Li, L. Wang, and P. H. Yang, “A Fast Method for Multi-Objective Nonlinear Dynamics Optimization of a Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 190-192. doi:10.18429/JACoW-IPAC2019-MOPGW045
[n] G. Bienvenu, “Behaviour of Warm Accelerating RF Structures Under High Gradient”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 970-973.
[n] M. Koratzinos, “The FCC-ee Interaction Region Magnet Design”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 57-60. doi:10.18429/JACoW-eeFACT2016-TUT1AH3
[n] J. T. Volk et al., “Correction Magnets for the Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB072, pp. 1766-1768.
[n] K. Blasche et al., “Commissioning of the Electron Cooling Device in the Heavy Ion Synchrotron SIS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05A, pp. 550-552.
[n] M. Reiser et al., “The High-Current Electron Beam Transport Experiment at the University of Maryland”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0007, pp. 309-311.
[n] C. Pellegrini, V. A. Dolgashev, C. D. Nantista, J. B. Rosenzweig, S. G. Tantawi, and G. Travish, “A Coherent Compton Backscattering High Gain FEL using an X-Band Microwave Undulator”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA006, pp. XX-XX.
[n] R. L. Geng, J. Kirchgessner, H. Padamsee, J. Sears, and V. Shemelin, “An Optimized Shape Cavity for TESLA: Concept and Fabrication”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB051, pp. 1314-1316.
[n] R. L. Geng, H. Padamsee, and V. Shemelin, “Multipacting in a Rectangular Waveguide”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH320, pp. 1228-1230.
[n] M. Rosing et al., “Argonne Wakefield Accelerator Update '92”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-15, pp. 79-81.
[n] H. Shang, G. Decker, L. Emery, W. E. Norum, and R. Soliday, “Application Software for the BSP-100 Beam Position Monitor at the APS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP036, pp. 167-169.
[n] J. M. Garland, J.-B. Lallement, and A. M. Lombardi, “LINAC5: A Quasi-Alvarez LINAC for BioLEIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2385-2388. doi:10.18429/JACoW-IPAC2017-TUPVA125
[n] M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974.
[n] W. Gallagher, K. Johnson, G. Mavrogenes, and W. Ramler, “A High Current Electron Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 584-589.
[n] D. E. Johnson, N. Gelfand, R. P. Johnson, and S. Saritepe, “Lattice Function Perturbations Caused by the Beam-Beam Interaction”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 114-117.
[n] J. A. Mock, A. S. Fisher, R. T. Herbst, P. Krejcik, and L. Sapozhnikov, “Commissioning of the LCLS-II Machine Protection System for MHz CW Beams”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 154-159. doi:10.18429/JACoW-IBIC2023-TU3I01
[n] V. Forte, J. L. Abelleira, E. Benedetto, C. Bracco, M. Cieslak-Kowalska, and G. P. Di Giovanni, “3D Emittances Tailoring Techniques and Optimization with Space Charge for the Future CERN PS Booster Operations with Linac4”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 660-663. doi:10.18429/JACoW-IPAC2016-MOPOR025
[n] W. Farabolini et al., “Diagnostics for the CTF3 Probe Beam Linac CALIFES”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB17, pp. 99-101.
[n] J. D. Gilpatrick, H. Marquez, J. Power, and V. Yuan, “Design and Operation of a Bunched-Beam, Phase-Spread Measurement”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-23, pp. 359-361.
[n] H. Ishimaru et al., “Construction of Vacuum System for TRISTAN Accumulation Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2906-2909.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Trbojevic et al., “NS-FFAG for Electron-Ion Collider in RHIC (eRHIC)”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA13, pp. 553-555.
- H. Ishimaru, Z. Igarashi, H. Nishimura, and S. Shibata, “Beam Size Measurement of 12 GeV Accelarator by Fast Rotary Scraper”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3358-3361.
- R. Dei-Cas, “Review of High-Brightness Electron Guns”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 109-114.
- T. Matsumoto et al., “Digital Low-Level RF Control System with Four Intermediate Frequencies at STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP081, pp. 2198-2200.
- M. T. Gundogan, O. Yavas, A. A. Aydin, E. Kasap, and C. Kaya, “Design, Production and Tests of Button Type BPM for TAC-TARLA IR FEL Facility”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 27-30.
- L. Calabretta et al., “Beam-Chopping System for LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-34, pp. 275-278.
- R. M. Franks, K. Hernandez, D. Otting, T. Henderson, D. Plate, and R. A. Rimmer, “Mechanical Design and Fabrication Processes for the ALS Third-Harmonic Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP61, pp. 803-805.
- T. Naito and T. M. Mitsuhashi, “Improvement of the Resolution of SR Interferometer at KEK-ATF Damping Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE009, pp. 972-974.
- P. Ilinski, “Residual Gas X-ray Beam Position Monitor for PETRA-III”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper MOCNB03, pp. 53-57.
- C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 157-159.
- B. Aune et al., “Superconducting RF Activities at Saclay”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-49, pp. 432-433.
- F. Peters, I. Hartl, C. Mohr, and L. Winkelmann, “OPC UA to DOOCS Bridge: A Tool for Automated Integration of Industrial Devices Into the Accelerator Control Systems at FLASH and European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 344-347.
- J. Xu, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “Highly Scalable Numerical Methods for Simulation of Space Charge Dominated Beams”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IOPK02, pp. 12-17.
- M. Schaumann et al., “First Partially Stripped Ions in the LHC (208Pb????)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 689-692.
- R. Tomas, M. Aiba, R. Calaga, A. Morita, and G. Vanbavinckhove, “Optics Correction in the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP025, pp. 2572-2574.
- L. Calabretta et al., “Invited Paper: Commissioning of the K800 INFN Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-02, pp. 12-19.
- S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “The New Design for Capture Cavity of CEBAF”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3955-3957.
- W. Bartmann et al., “Impact of LHC and SPS Injection Kicker Rise Times on Lhc Filling Schemes and Luminosity Reach”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2043-2046.
- G. M. wang et al., “Experimental Progress of DC-SC Photoinjector at Peking University”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP048, pp. XX-XX.
- Y. X. Zhang et al., “Research on Secondary Electron Emission Characteristics of Diamond-like Carbon Thin Films”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1306-1308.
- S. Nath and G. Neuschaefer, “Longitudinal Tune-Up of the SSC Drift-Tube and Coupled Cavity Linac Sections”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 485-488.
- E. F. Valderrama et al., “Mo-Re Films for SRF Applications”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO077, pp. 930-935.
- J. Boyd, “Fast All-Metal Six-Inch Valve”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 743-746.
- A. Mosnier et al., “Superconducting RF Activities at SACLAY : Status Report”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89A08, pp. XX-XX.
- D. Mascali et al., “Innovative Schemes of Plasma Heating for Future Multiply-Charged Ions Sources: Modeling and Experimental Investigation”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 14-17.
- T. Miura et al., “Evaluation of LLRF Stabilities at STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP084, pp. 2207-2209.
- Y. Zhao, J. S. Cao, J. He, Y. F. Sui, and L. Wang, “Heating Analysis and the Solutions of DCCT System for BEPCII”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 92-94.
- A. K. ?çift?ºi, R. ?çift?ºi, and F. Zimmermann, “Deflecting Synchrotron Radiation from the Interaction Region of a Linac-Ring LHeC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB043, pp. 1623-1625.
- R. B. Palmer et al., “Cooling Scheme for a Muon Collider”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUM2I06, pp. 77-81.
- S. Michizono et al., “Vector-Sum Control of Superconducting RF Cavities at STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP083, pp. 2204-2206.
- M. Bickley, J. Chen, and C. Larrieu, “EPICS Tools Enhancements and Transportability”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP36, pp. 741-743.
- J. Casey, M. P. J. Gaudreau, M. A. Kempkes, and J. M. Mulvaney, “Solid-State High Voltage Pulse Modulators for High Power Microwave Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A07, pp. 2361-2363.
- Z. H. Bai and L. Wang, “Super-Period Multi-Bend Achromat Lattice with Interleaved Dispersion Bumps for the HALS Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3597-3599.
- P. Ilinski, “NSLS-II X-ray Diagnostics Development”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP199, pp. 468-470.
- F.-J. Decker et al., “Two-Color Self-seeding and Scanning the Energy of Seeded Beams at LCLS”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO09, pp. 514-517.
- G. Kube, H. Backe, W. Lauth, and H. Sch?Âpe, “Smith-Purcell Radiation in View of Particle Beam Diagnostics”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper IT09, pp. XX-XX.
- S. P. Weathersby, M. Kosovsky, N. Kurita, A. Novokhatski, and J. Seeman, “A Proposal for a New HOM Absorber in a Straight Section of the PEP-II Low Energy Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP031, pp. 2173-2175.
- P. G. O'Shea et al., “The University of Maryland Electron Ring (UMER)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA008, pp. 159-163.
- A. Koschik et al., “Gantry 3: Further Development of the PSI PROSCAN Proton Therapy Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2275-2277.
- M. Aiba et al., “Study of Beam Based Alignment and Orbit Feedback for SwissFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPA08, pp. 588-591.
- S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB024, pp. 438-441.
- T. Momose, H. Hirayama, H. Ishimaru, and O. Kon, “New Concept for Radiation Absorbers in TRISTAN Accumulation Ring (TAR)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1344-1347.
- M. K. Kim, J. S. Hong, and T. H. Tak, “The Implementation of KSTAR Fast Interlock System using C-RIO”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 337-340.
- H. Chen, C.-X. Tang, and Y. H. Liu, “Low-Energy Linacs and Their Applications in Tsinghua University”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP007, pp. 256-258.
- G.-T. Park, F. Fors, J. Guo, R. A. Rimmer, H. Wang, and S. Wang, “The Development of a New Fast Harmonic Kicker for the JLEIC Circulator Cooling Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1171-1173.
- J. M. Byrd et al., “Femtosecond Synchronization of Laser Systems for the LCLS”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper MOCNB04, pp. 58-62.
- J. J. Tan, Z. H. Bai, W. Li, L. Wang, and P. H. Yang, “A Fast Method for Multi-Objective Nonlinear Dynamics Optimization of a Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 190-192.
- G. Bienvenu, “Behaviour of Warm Accelerating RF Structures Under High Gradient”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 970-973.
- M. Koratzinos, “The FCC-ee Interaction Region Magnet Design”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 57-60.
- J. T. Volk et al., “Correction Magnets for the Fermilab Recycler Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB072, pp. 1766-1768.
- K. Blasche et al., “Commissioning of the Electron Cooling Device in the Heavy Ion Synchrotron SIS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05A, pp. 550-552.
- M. Reiser et al., “The High-Current Electron Beam Transport Experiment at the University of Maryland”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WED0007, pp. 309-311.
- C. Pellegrini, V. A. Dolgashev, C. D. Nantista, J. B. Rosenzweig, S. G. Tantawi, and G. Travish, “A Coherent Compton Backscattering High Gain FEL using an X-Band Microwave Undulator”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOA006, pp. XX-XX.
- R. L. Geng, J. Kirchgessner, H. Padamsee, J. Sears, and V. Shemelin, “An Optimized Shape Cavity for TESLA: Concept and Fabrication”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB051, pp. 1314-1316.
- R. L. Geng, H. Padamsee, and V. Shemelin, “Multipacting in a Rectangular Waveguide”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH320, pp. 1228-1230.
- M. Rosing et al., “Argonne Wakefield Accelerator Update '92”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-15, pp. 79-81.
- H. Shang, G. Decker, L. Emery, W. E. Norum, and R. Soliday, “Application Software for the BSP-100 Beam Position Monitor at the APS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP036, pp. 167-169.
- J. M. Garland, J.-B. Lallement, and A. M. Lombardi, “LINAC5: A Quasi-Alvarez LINAC for BioLEIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2385-2388.
- M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974.
- W. Gallagher, K. Johnson, G. Mavrogenes, and W. Ramler, “A High Current Electron Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 584-589.
- D. E. Johnson, N. Gelfand, R. P. Johnson, and S. Saritepe, “Lattice Function Perturbations Caused by the Beam-Beam Interaction”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 114-117.
- J. A. Mock, A. S. Fisher, R. T. Herbst, P. Krejcik, and L. Sapozhnikov, “Commissioning of the LCLS-II Machine Protection System for MHz CW Beams”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU3I01, pp. 154-159.
- V. Forte, J. L. Abelleira, E. Benedetto, C. Bracco, M. Cieslak-Kowalska, and G. P. Di Giovanni, “3D Emittances Tailoring Techniques and Optimization with Space Charge for the Future CERN PS Booster Operations with Linac4”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 660-663.
- W. Farabolini et al., “Diagnostics for the CTF3 Probe Beam Linac CALIFES”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB17, pp. 99-101.
- J. D. Gilpatrick, H. Marquez, J. Power, and V. Yuan, “Design and Operation of a Bunched-Beam, Phase-Spread Measurement”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-23, pp. 359-361.
- H. Ishimaru et al., “Construction of Vacuum System for TRISTAN Accumulation Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2906-2909.
Back to search