Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
[n] J. Grillenberger and M. Schneider, “PSI HIPA Facility: Operation and Upgrade Plans”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper TUA4I1, unpublished.
[n] J. Wei et al., “Field Quality Evaluation of the Superconducting Magnets of the Relativistic Heavy Ion Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP10, pp. 461-463.
[n] J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1655-1659.
[n] F. R. Gallegos, A. A. Browman, and L. J. Morrison, “The Development of a Beam Current Monitor System for Measuring Pulsed-Beam Current Over a Wide Dynamic Range”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1959-1962.
[n] Y. W. Kang et al., “High Power RF Test Facility at the SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT059, pp. 3450-3452.
[n] J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580.
[n] H. Akiyama, K. Hiramoto, and H. Kubo, “Development of Magnet Power Supply System for Fast Pattern Excitation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A04, pp. 2196-2198.
[n] L. V. Kravchuk, V. A. Puntus, G. V. Romanov, and S. G. Tarasov, “Multipactoring Studies in Accelerating Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-54, pp. 465-467.
[n] M. Ruf, P. Quednau, L. Schmidt, and S. Setzer, “Applicability of the AM-PM Conversion Method to Beam Position Monitoring of Electron Beams accelerated in S-Band Frequency Range”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD20, pp. 86-88.
[n] I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322.
[n] D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n] E. J. Prebys et al., “Increasing the Intensity of the Fermilab Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG022, pp. 2936-2938.
[n] Y. Sato et al., “Progress of a Control System for Slow-Extraction Beam Lines at J-PARC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_001.
[n] S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
[n] T. Natsui, K. Lee, A. Mori, F. Sakamoto, and M. Uesaka, “Beam Measurement Experiment of X-band Linac for Compton Scattering X-ray Generation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA010, pp. 82-84.
[n] C. Gough et al., “The SLS Booster Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
[n] C. A. Kitegi et al., “QUAPEVA: Variable High Gradient Permanent Magnet Quadrupole”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 89-92. doi:10.18429/JACoW-FLS2018-WEA2WD01
[n] J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3971-3974.
[n] A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435.
[n] A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1475-1479. doi:10.18429/JACoW-ICALEPCS2023-THPDP064
[n] P. Kneisel, R. W. R?Âth, and H.-G. K??rschner, “Results from a Nearly Defect-Free Niobium Cavity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C17, pp. 449-453.
[n] F. Alharthi et al., “Target Studies for the FCC-ee Positron Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1979-1982. doi:10.18429/JACoW-IPAC2022-WEPOPT054
[n] Y. Suzuki et al., “Upgrade of a Low-Level Controller of Magnet Power Supply”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP571, pp. XX-XX.
[n] G. Wang et al., “Path to high current 500 mA at NSLS-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG13, unpublished.
[n] R. Chebab, J. Bonnard, G. Humbert, B. Leblond, and J. L. Saury, “A Multiwire Secondary Emission Profile Monitor for Small Emittance Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1953-1956.
[n] J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 479-482.
[n] J. D. Jarvis et al., “Uniformity Conditioning of Diamond Field-Emitter Arrays”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH028, pp. 302-304.
[n] R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
[n] J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO018
[n] F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941.
[n] W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
[n] M. McGee, R. Doremus, and R. Wands, “Mechanical Stability Study of Type IV Cryomodule (ILC Prototype)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN104, pp. 2277-2279.
[n] D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
[n] Y. Iwashita et al., “Diversified Application of ILC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 502-504. doi:10.18429/JACoW-IPAC2018-MOPML047
[n] F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1047-1048. doi:10.18429/JACoW-ICALEPCS2015-WEPGF146
[n] Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
[n] O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
[n] U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
[n] Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
[n] F.-J. Decker et al., “Towards Achieving the Design Number of Bunches in PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B11, pp. 403-405.
[n] T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2284-2286.
[n] N. F. Ziegler et al., “Status Report on the Oak Ridge 25 MV Tandem Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2672-2675.
[n] R. B. Fiorito, S. E. Caldwell, S. G. Iversen, J. S. Ladish, X. K. Maruyama, and D. W. Rule, “Optical Transition Radiation Diagnostics for Low Emittance, High Energy, Charged Particle Beams”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1078-1081.
[n] B. P. Strauss, G. H. Biallas, and R. J. Powers, “How to Mass Product Reliable Cryostats for large Particle Accelerators”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3941-3944.
[n] H. L. Andrews, C. A. Brau, and J. D. Jarvis, “Three-Dimensional Theory for a Smith-Purcell Free-Electron Laser with Grating Sidewalls”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH005, pp. 17-20.
[n] H. Piekarz, S. Hays, Y. Huang, and V. D. Shiltsev, “Design Considerations of Fast-cycling Synchrotrons Based on Superconducting Transmission Line Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC101, pp. 301-303.
[n] S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 573-576.
[n] P. J. Tallerico and W. A. Reass, “The RF Power System for the SNS Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4073, pp. 567-569.
[n] H. A. Hogg, G. A. Loew, and V. G. Price, “Experiments with Very High Power RF Pulses at SLAC”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3457-3460.
[n] M. Alves and F. de Sá, “Slow longitudinal mode 1 instability in electron storage rings with harmonic cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 782-785. doi:10.18429/JACoW-IPAC2024-MOPS32
[n] E. Mahner, R. Heiderhoff, N. Minatti, and H. Piel, “Enhanced Field Emmission of Niobium Single Crystals”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1653-1656.
[n] S. Yu et al., “Heavy Ion Fusion 2 MV Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE01, pp. 1178-1182.
[n] X. J. Wang et al., “Inverse Cerenkov Laser Acceleration Experiment at ATF (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-47, pp. 810-812.
[n] S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
- J. Grillenberger and M. Schneider, “PSI HIPA Facility: Operation and Upgrade Plans”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA4I1, unpublished.
- J. Wei et al., “Field Quality Evaluation of the Superconducting Magnets of the Relativistic Heavy Ion Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAP10, pp. 461-463.
- J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1655-1659.
- F. R. Gallegos, A. A. Browman, and L. J. Morrison, “The Development of a Beam Current Monitor System for Measuring Pulsed-Beam Current Over a Wide Dynamic Range”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1959-1962.
- Y. W. Kang et al., “High Power RF Test Facility at the SNS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT059, pp. 3450-3452.
- J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 576-580.
- H. Akiyama, K. Hiramoto, and H. Kubo, “Development of Magnet Power Supply System for Fast Pattern Excitation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A04, pp. 2196-2198.
- L. V. Kravchuk, V. A. Puntus, G. V. Romanov, and S. G. Tarasov, “Multipactoring Studies in Accelerating Structures”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-54, pp. 465-467.
- M. Ruf, P. Quednau, L. Schmidt, and S. Setzer, “Applicability of the AM-PM Conversion Method to Beam Position Monitoring of Electron Beams accelerated in S-Band Frequency Range”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD20, pp. 86-88.
- I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322.
- D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 78-81.
- E. J. Prebys et al., “Increasing the Intensity of the Fermilab Booster”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG022, pp. 2936-2938.
- Y. Sato et al., “Progress of a Control System for Slow-Extraction Beam Lines at J-PARC”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_001.
- S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
- T. Natsui, K. Lee, A. Mori, F. Sakamoto, and M. Uesaka, “Beam Measurement Experiment of X-band Linac for Compton Scattering X-ray Generation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA010, pp. 82-84.
- C. Gough et al., “The SLS Booster Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
- C. A. Kitegi et al., “QUAPEVA: Variable High Gradient Permanent Magnet Quadrupole”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 89-92.
- J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3971-3974.
- A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435.
- A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP064, pp. 1475-1479.
- P. Kneisel, R. W. R?Âth, and H.-G. K??rschner, “Results from a Nearly Defect-Free Niobium Cavity”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C17, pp. 449-453.
- F. Alharthi et al., “Target Studies for the FCC-ee Positron Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1979-1982.
- Y. Suzuki et al., “Upgrade of a Low-Level Controller of Magnet Power Supply”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP571, pp. XX-XX.
- G. Wang et al., “Path to high current 500 mA at NSLS-II”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG13, unpublished.
- R. Chebab, J. Bonnard, G. Humbert, B. Leblond, and J. L. Saury, “A Multiwire Secondary Emission Profile Monitor for Small Emittance Beams”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1953-1956.
- J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 479-482.
- J. D. Jarvis et al., “Uniformity Conditioning of Diamond Field-Emitter Arrays”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH028, pp. 302-304.
- R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
- J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244.
- F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941.
- W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
- M. McGee, R. Doremus, and R. Wands, “Mechanical Stability Study of Type IV Cryomodule (ILC Prototype)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN104, pp. 2277-2279.
- D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
- Y. Iwashita et al., “Diversified Application of ILC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 502-504.
- F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1047-1048.
- Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
- O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
- U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
- Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
- F.-J. Decker et al., “Towards Achieving the Design Number of Bunches in PEP-II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B11, pp. 403-405.
- T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2284-2286.
- N. F. Ziegler et al., “Status Report on the Oak Ridge 25 MV Tandem Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2672-2675.
- R. B. Fiorito, S. E. Caldwell, S. G. Iversen, J. S. Ladish, X. K. Maruyama, and D. W. Rule, “Optical Transition Radiation Diagnostics for Low Emittance, High Energy, Charged Particle Beams”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1078-1081.
- B. P. Strauss, G. H. Biallas, and R. J. Powers, “How to Mass Product Reliable Cryostats for large Particle Accelerators”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3941-3944.
- H. L. Andrews, C. A. Brau, and J. D. Jarvis, “Three-Dimensional Theory for a Smith-Purcell Free-Electron Laser with Grating Sidewalls”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH005, pp. 17-20.
- H. Piekarz, S. Hays, Y. Huang, and V. D. Shiltsev, “Design Considerations of Fast-cycling Synchrotrons Based on Superconducting Transmission Line Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC101, pp. 301-303.
- S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 573-576.
- P. J. Tallerico and W. A. Reass, “The RF Power System for the SNS Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4073, pp. 567-569.
- H. A. Hogg, G. A. Loew, and V. G. Price, “Experiments with Very High Power RF Pulses at SLAC”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3457-3460.
- M. Alves and F. de Sá, “Slow longitudinal mode 1 instability in electron storage rings with harmonic cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS32, pp. 782-785.
- E. Mahner, R. Heiderhoff, N. Minatti, and H. Piel, “Enhanced Field Emmission of Niobium Single Crystals”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1653-1656.
- S. Yu et al., “Heavy Ion Fusion 2 MV Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE01, pp. 1178-1182.
- X. J. Wang et al., “Inverse Cerenkov Laser Acceleration Experiment at ATF (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-47, pp. 810-812.
- S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
Back to search