JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Dai, Z. Q. Li, and P. Zhang, “Post Processing of a 166.6 MHz HEPS-TF Cavity at Institute of High Energy Physics”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 583-585. doi:10.18429/JACoW-SRF2017-TUPB083
[n]	S. Slinker, G. Joyce, J. Krall, and M. Lampe, “Beam Dynamics in the Spiral Line Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 242-245. 
[n]	M. Holz, L. Balbin, M. Ebbeni, L. Roslund, and H. Tarawneh, “Progress and challenges of the compact APPLE X undulator prototype at MAX IV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1233-1235. doi:10.18429/JACoW-IPAC2023-MOPM110
[n]	M. P. Kelly, “SC Spoke Cavity”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAY07, pp. 337-340. 
[n]	K. Knaack, R. Neubert, S. Nietzsche, A. Peters, W. Vodel, and K. Wittenburg, “A New SQUID-based Measurement Tool for Characterization of Superconducting RF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH031, pp. 1070-1072. 
[n]	Q. Luo, T. Liu, C. Zhang, Z. Zhou, and A. Zhang, “Design Progress for Accelerators of a Super Tau Charm Facility in China”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL090, unpublished. 
[n]	G. A. Krafft, A. S. Hofler, K. L. Mahoney, P. K. Kloeppel, B. A. Bowling, and C. S. Higgins, “Performance of the CEBAF Arc Beam Position Monitors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2298-2301. 
[n]	C. D. Curtis, G. M. Lee, C. W. Owen, C. W. Schmidt, and W. M. Smart, “Linac H- -Beam Operation and uses at Fermilab”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3760-3763. 
[n]	A. Paech, W. Ackermann, O. Grimm, and T. Weiland, “Numerical Simulation of Synchrotron Radiation for Bunch Diagnostics”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH016, pp. 1031-1033. 
[n]	G. Penco et al., “Time-Sliced Emittance and Energy Spread Measurements at FERMI@Elettra”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD20, pp. 417-420. 
[n]	K. Balewski et al., “Commissioning Results of Beam Diagnostics for the PETRA III Light Source”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOOB02, pp. 19-23. 
[n]	P. Balleyguier, “Coupling Slots Measurements Against Simulation for TRISPAL Accelerating Cavities”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4036, pp. 130-132. 
[n]	S. M. Hartman, “Control System Availability for the Spallation Neutron Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP010, pp. 691-693. 
[n]	N. Marquardt, “DELTA, a Low-Emittance Storage Ring as Free-Electron-Laser Radiation Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 780-783. 
[n]	S. Assadi and C. S. Mishra, “Nonlinear Mode Coupling Analysis in the Tevatron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG10, pp. 2777-2779. 
[n]	J. P. Delahaye, H. Kugler, A. Levy-Mandel, F. Perriollat, and J. P. Potier, “On-line Modelling, a Tool at Commissioning of the 600 MeVee- Accumulator (EPA) of LEP”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 692-695. 
[n]	K. Scheidt, “UV and Visible Light Diagnostics for the ESRF Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP030L, pp. 1621-1623. 
[n]	N. Eddy and O. Lysenko, “Using the Transverse Digital Damper as a Real-time Tune Monitor for the Booster Synchrotron at Fermilab”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD71, pp. 209-211. 
[n]	M.-J. Yang and M. Xiao, “Multipole error Analysis Using Local 3-Bump Orbit Data in Fermilab Recycler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE084, pp. 4144-4146. 
[n]	C. M. Gulliford, N. Banerjee, A. C. Bartnik, J. S. Berg, J. A. Crittenden, and P. Quigley, “Using an Energy Scan to Determine the Tunes and Orbit  in the First FFA Girder of CBETA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 742-744. doi:10.18429/JACoW-IPAC2019-MOPRB074
[n]	M. Kinsho, “Status and Future Upgrade of J-PARC Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 999-1003. doi:10.18429/JACoW-IPAC2016-TUXA01
[n]	B. Lindstrom et al., “Crab Cavity Failures Combined with a Loss of the Beam-Beam Kick in the High Luminosity LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 192-195. doi:10.18429/JACoW-IPAC2018-MOPMF042
[n]	Z. Ahmed and R. C. Sethi, “An Analytical Method to Determine the Geometry of the Sectors”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-07, pp. 305-308. 
[n]	B. Rio et al., “Adaptable Control System for the Photon Beamlines at the European XFEL: Integrating New Devices and Technologies for Advanced Research”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1349-1353. doi:10.18429/JACoW-ICALEPCS2023-THPDP022
[n]	A. V. Smirnov, “Bi-Complex Toolbox Applied to Gyromagnetic Beam Break-Up”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 585-587. doi:10.18429/JACoW-NAPAC2016-TUPOB41
[n]	G. Umapathy, S. Chopra, D. Kanjilal, and S. Ojha, “Ion beam techniques for analysis the materials using 1.7 MV tandem accelerator”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP03, unpublished. 
[n]	K. Y. Ng and J. Peterson, “Emittance Growth Due to Beam Motion”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1645-1648. 
[n]	M. Vadrucci et al., “Accelerator Machines and Experimental Activities in the ENEA Frascati Particle Accelerators and Medical Application Laboratory”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 460-463. doi:10.18429/JACoW-IPAC2018-MOPML028
[n]	O. N. Borisov, B. Gikal, G. Gulbekian, I. A. Ivanenko, and I. V. Kalagin, “Optimisation of the Axial Injection System for U400 Cyclotron Linear Buncher”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A13, pp. 1468-1470. 
[n]	Y. Iwashita, Y. Fuwa, M. Hino, T. Kubo, and T. Saeki, “Evaluation of Sc Property Coated on a Surface”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB062, pp. 723-725. 
[n]	C. D. Curtis and G. M. Lee, “Preaccelerator Column Design”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-5, pp. 487-496. 
[n]	F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and T. Lamy, “Commissioning of the ECRIS Charge State Breeder at TRIUMF”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper WECOBK01, pp. 178-180. 
[n]	V. Kiselev and V. Smaluk Budker Institute of Nuclear Physics, “A method for measurement of transverse impedance distribution along storage ring”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT19, pp. XX-XX. 
[n]	D. J. Harding and A. Riddiford, “Automatic Steering Corrections to Minimize Injection Oscillations in the Fermilab Antiproton Source Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1663-1666. 
[n]	J. Boedewadt, E. Hass, and J. Rossbach, “Commissioning Results of the Photon-Electron Diagnostic Unit at sFLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD54, pp. 173-175. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search