JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Z. Reszela, G. Cuni, C. M. Falc??n Torres, D. Fernandez-Carreiras, C. Pascual-Izarra, and M. Rosanes Siscart, “Iterative Development of the Generic Continuous Scans in Sardana”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 524-528. doi:10.18429/JACoW-ICALEPCS2015-TUB3O02
[n]	M. R. Rehman et al., “Progress of the Novel Three-dimensional Spiral Injection Scheme Test Experiment”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 717-720. doi:10.18429/JACoW-LINAC2018-THPO017
[n]	R. F. Lambiase, B. Oerter, and J. Smith, “Power Supply Control for the Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B17, pp. 2211-2213. 
[n]	W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168. 
[n]	M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1036-1039. 
[n]	H. Bohlen et al., “Operating Results for the PEP-II 1.2 MW Klystron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP086L, pp. 2155-2160. 
[n]	J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740. 
[n]	T. B. Bolshakov, A. D. Petrov, and S. L. Lackey, “Synoptic Display - A Client-Server System for Graphical Data Representation”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP505, pp. XX-XX. 
[n]	Q. Kerns, M. Popovic, and C. Kerns, “Spark Location in RF Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR21, pp. 1838-1840. 
[n]	T. Bertuccio, B. Brown, G. Donica, T. Ellison, and D. L. Friesel, “High Voltage System Design for the IUCF 300 kV Electron Cooling System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3128-3131. 
[n]	E. Demmel, S. Luetgert, B. Offermann, and H. Schwarz, “A New High Power Klystron for the SLAC B-Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP079L, pp. 2152-2154. 
[n]	R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71. 
[n]	M. N. Butler, F. Jones, S. Koscielniak, and G. H. Mackenzie, “Coulomb Scattering Cross Sections for Accelerator Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 654-657. 
[n]	V. Poncza and A. Lehrach, “Search for Electric Dipole Moments at Cosy in J??lich - Spin-Tracking Simulations Using Bmad”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 914-917. doi:10.18429/JACoW-IPAC2019-MOPTS028
[n]	M. Vall?®au et al., “Construction and Optimization of Cryogenic Undulators at SOLEIL”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 193-198. doi:10.18429/JACoW-FLS2018-THP2WD01
[n]	T. H. Tak, J. S. Hong, M. K. Kim, G. I. Kwon, T. G. Lee, and W. R. Lee, “Development of Pulse Fault Sequence Analysis Application with KSTAR Data Integration System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 663-665. doi:10.18429/JACoW-ICALEPCS2017-TUPHA105
[n]	S. F. Mikhailov, H. Hao, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Protection of VUV FEL Mirrors using Soft Orbit Bump at Duke FEL/HIGS facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA074, pp. 1301-1303. 
[n]	S. Bristol, C. Kerns, Q. Kerns, and H. W. Miller, “The Tevatron Global Radius and  phis System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2141-2144. 
[n]	M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 878-883. doi:10.18429/JACoW-LINAC2022-FR1AA05
[n]	L. T. Sun et al., “Status of FECR Ion Source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WET2AUCO03, unpublished. 
[n]	F. D. Dziuba et al., “RF Commissioning of the Superconducting 217 MHz CH Cavity for Heavy Ions and First Beam Operation”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 859-862. doi:10.18429/JACoW-LINAC2018-THPO073
[n]	H. Takahashi, N. Hayashi, and M. Sugimoto, “Synchronized Data Distribution and Acquisition System Using Reflective Memory for J-PARC 3GeV RCS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP013, pp. 1553-1555. 
[n]	L. K. Mestha and K. S. Yeung, “Sliding Mode Controller for RF Cavity Tuning Loop”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 783-786. 
[n]	H. Kwon, K. Lee, M. Chun, K. Chung, H. Kim, and M. Park, “Single Pass Acceleration Experiment Using Coaxial Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH029, pp. 2512-2514. 
[n]	D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023. 
[n]	H. Saito et al., “Characteristics of Polarized Coherent Radiation in Thz Region From a Crossed-Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1769-1771. doi:10.18429/JACoW-IPAC2019-TUPRB038
[n]	R. W. Allison, D. M. Evans, R. M. Richter, A. J. Sherwood, and E. Zajec, “Measurements of the Linear-Accelerator Exit Beam of the Bevatron Injector”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-02, pp. 34-47. 
[n]	R. M. Zwaska, W. Chou, I. Kourbanis, A. Marchionni, V. D. Shiltsev, and X. Zhang, “Electron Cloud Investigations in the Fermilab Main Injector”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAW05, pp. XX-XX. 
[n]	R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1374-1376. doi:10.18429/JACoW-ICALEPCS2017-THPHA018
[n]	Y. Iwashita et al., “Non-destructive Inspections for SC Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB07, pp. 156-158. 
[n]	D. Doll et al., “Low to High Energy Beamstops for APT”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4090, pp. 615-617. 
[n]	R. F. Lambiase, B. Oerter, S. Peng, and J. Smith, “Power Supply Control and Monitoring for the SNS Ring and Transport System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH005, pp. 3666-3668. 
[n]	G. Ferioli, L. Jensen, and G. Vismara, “Protection and Diagnostic Systems for High Intensity Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358-360. 
[n]	J. C. Sheppard et al., “Update to the NLC Injector System Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH068, pp. 3834-3836. 
[n]	I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1927-1930. 
[n]	J. Paszkiewicz, P. Burrows, and W. Wuensch, “Spatially Resolved Dark Current in High Gradient Traveling Wave Structures”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2956-2959. doi:10.18429/JACoW-IPAC2019-WEPRB062
[n]	M. Farkhondeh, K. A. Dow, W. W. Sapp, and D. R. Tieger, “Survey and Alignment of the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2938-2941. 
[n]	S. Baturin, A. Altmark, I. L. Sheynman, and A. Kanareykin, “Parameter Optimization of a Rectangular Dielectric Based Wakefield Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA008, pp. 260-262. 
[n]	A. Kanareykin et al., “Simulations and Measurements of Beam Breakup in Dielectric Wakefield Structures”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC081, pp. 1904-1906. 
[n]	C. Chen and W. Zhao, “The Progress of Low Energy Particle Accelerators in China”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 242-247. 
[n]	T. Ota, T. Iimura, T. Nagafuchi, K. Satoh, O. Takeda, and Y. Tanabe, “Transient Characteristics of a Solid Sector Bending Magnet for Use in Compact Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2238-2241. 
[n]	G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3625-3628. 
[n]	O. Takeda et al., “Design Study on an 80 MHz RFq Linac for Heavy Ions”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1334-1337. 
[n]	W. A. Barth et al., “Further R&D for a New Superconducting CW Heavy Ion Linac@GSI”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3211-3213. doi:10.18429/JACoW-IPAC2014-THPME004
[n]	E.-G. Schweppe, E. Demmel, S. Isagawa, H. Seifert, T. Shintake, and M. Yoshida, “Analysis and Optimisation of RF Power-Klystrons by FCI-Code”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 757-760. 
[n]	A. Perin, S. D. Claudet, and R. van Weelderen, “Operational Experience with the LHC Superconducting Links and Evaluation of Possible Cryogenic Schemes for Future Remote Powering of Superconducting Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA073, pp. 3840-3842. 
[n]	M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 634-637. 
[n]	A. E. Vlieks et al., “100 MW Klystron Development at SLAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 798-801. 
[n]	R. Kiessling, S. Gewinner, A. Paarmann, W. Sch?Âllkopf, and M. Wolf, “Synchronized Mid-Infrared Pulses at the Fritz Haber Institute IR-FEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 188-191. doi:10.18429/JACoW-FEL2017-MOP059
[n]	M. Toyoda, R. Sunayama, and M. Yanagihara, “Low-Order Aberrations Correction of Extreme Ultraviolet Imaging Objective with Deformable Multilayer Mirrors”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 213-215. doi:10.18429/JACoW-MEDSI2016-TUPE22
[n]	H. Yamada et al., “Measurement of Coherent Smith-Purcell Radiation Using Ultra-Short Electron Bunch at T-Acts”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1696-1699. doi:10.18429/JACoW-IPAC2021-TUPAB131

For LaTeX

Use Complete Form

For BibTeX

References

Back to search