Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
[n] S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
[n] X. Li, S. F. Martins, and P. Muggli, “Simulations of Positron Beams Propagating in Plasma”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP025, pp. 4586-4588.
[n] D. J. Kelliher et al., “Studies of 10 GeV Decay Ring Design for the International Design Study of the Neutrino Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI049, pp. 1457-1459.
[n] A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
[n] M. Fitterer et al., “Hollow Electron Beam Collimation for HL-LHC - Effects on the Beam Core”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2482-2485. doi:10.18429/JACoW-IPAC2017-WEOBA2
[n] G. De Michele and A. Grudiev, “Analysis of Long-range Wakefields in CLIC Main Linac Accelerating Structures with Damping Loads”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR077, pp. 3111-3113.
[n] R. Bruce, S. S. Gilardoni, and J. M. Jowett, “Effects of Ultraperipheral Nuclear Collisions in the LHC and their Alleviation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP006, pp. 2533-2535.
[n] A. Novokhatski, “The Effect of an Oxide Layer on Resistive-Wall Wake Fields”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP087, pp. 4743-4745.
[n] W. Lu et al., “Designing LWFA in the Blowout Regime”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS023, pp. 3050-3051.
[n] B. Dehning et al., “Dynamic Beam Based Calibration Of Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04H, pp. 430-432.
[n] T. Giacomini, P. Forck, D. A. Liakin, and V. Skachkov, “Improving the Reliability of IPM”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT004, pp. XX-XX.
[n] A. E. Pak, C. Joshi, K. A. Marsh, S. F. Martins, and W. B. Mori, “Investigation of Ionization Induced Trapping in a Laser Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP099, pp. 3031-3033.
[n] E. Syresin et al., “NICA Accelerator Complex at JINR”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 452-454. doi:10.18429/JACoW-IPAC2019-MOPMP014
[n] K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
[n] D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
[n] J. Buerger, J. A. Dammann, L. Hagge, J. I. Iversen, A. Matheisen, and W. Singer, “Supporting Cavity Production Using an Engineering Data Management System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT078, pp. 4024-4026.
[n] F. S. Tsung, C. Joshi, S. F. Martins, and W. B. Mori, “Acceleration of Ions via a Shock Compression in a Critical Density Plasma Using a CO2 Laser”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP089, pp. 1503-1503.
[n] S. Harave, B. Lam, C. Herr, J. Tagle, J. Hugyik, and M. Larrus, “LCLS II DC magnet power supplies – an overview”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3751-3753. doi:10.18429/JACoW-IPAC2024-THPS12
[n] M. Tzoufras, S. Fonseca, W. Lu, W. B. Mori, L. O. Silva, and F. S. Tsung, “Is it Possible To Generate nC, Mono-Energetic Electron Beams at 1GeV and Beyond Using Existing or Near Term Lasers via LWFA?”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPAE045, unpublished.
[n] S. Banerjee, N. D. Powers, V. Ramanathan, B. Shadwick, and D. P. Umstadter, “Stable, Monoenergetic 50-400 MeV Electron Beams with a Matched Laser Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC02, pp. 3151-3153.
[n] D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, V. Skachkov, and A. Vetrov, “Development of a Permanent Magnet Residual Gas Profile Monitor With Fast Readout”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT100, pp. 2724-2726.
[n] D. Einfeld et al., “Status of the Injector System for the Synchrotron Light Source ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP70, pp. 2427-2429.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
- S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
- X. Li, S. F. Martins, and P. Muggli, “Simulations of Positron Beams Propagating in Plasma”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP025, pp. 4586-4588.
- D. J. Kelliher et al., “Studies of 10 GeV Decay Ring Design for the International Design Study of the Neutrino Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI049, pp. 1457-1459.
- A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
- M. Fitterer et al., “Hollow Electron Beam Collimation for HL-LHC - Effects on the Beam Core”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2482-2485.
- G. De Michele and A. Grudiev, “Analysis of Long-range Wakefields in CLIC Main Linac Accelerating Structures with Damping Loads”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR077, pp. 3111-3113.
- R. Bruce, S. S. Gilardoni, and J. M. Jowett, “Effects of Ultraperipheral Nuclear Collisions in the LHC and their Alleviation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP006, pp. 2533-2535.
- A. Novokhatski, “The Effect of an Oxide Layer on Resistive-Wall Wake Fields”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP087, pp. 4743-4745.
- W. Lu et al., “Designing LWFA in the Blowout Regime”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS023, pp. 3050-3051.
- B. Dehning et al., “Dynamic Beam Based Calibration Of Beam Position Monitors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP04H, pp. 430-432.
- T. Giacomini, P. Forck, D. A. Liakin, and V. Skachkov, “Improving the Reliability of IPM”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT004, pp. XX-XX.
- A. E. Pak, C. Joshi, K. A. Marsh, S. F. Martins, and W. B. Mori, “Investigation of Ionization Induced Trapping in a Laser Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP099, pp. 3031-3033.
- E. Syresin et al., “NICA Accelerator Complex at JINR”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 452-454.
- K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
- D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
- J. Buerger, J. A. Dammann, L. Hagge, J. I. Iversen, A. Matheisen, and W. Singer, “Supporting Cavity Production Using an Engineering Data Management System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT078, pp. 4024-4026.
- F. S. Tsung, C. Joshi, S. F. Martins, and W. B. Mori, “Acceleration of Ions via a Shock Compression in a Critical Density Plasma Using a CO2 Laser”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP089, pp. 1503-1503.
- S. Harave, B. Lam, C. Herr, J. Tagle, J. Hugyik, and M. Larrus, “LCLS II DC magnet power supplies – an overview”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS12, pp. 3751-3753.
- M. Tzoufras, S. Fonseca, W. Lu, W. B. Mori, L. O. Silva, and F. S. Tsung, “Is it Possible To Generate nC, Mono-Energetic Electron Beams at 1GeV and Beyond Using Existing or Near Term Lasers via LWFA?”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE045, unpublished.
- S. Banerjee, N. D. Powers, V. Ramanathan, B. Shadwick, and D. P. Umstadter, “Stable, Monoenergetic 50-400 MeV Electron Beams with a Matched Laser Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GBC02, pp. 3151-3153.
- D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, V. Skachkov, and A. Vetrov, “Development of a Permanent Magnet Residual Gas Profile Monitor With Fast Readout”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT100, pp. 2724-2726.
- D. Einfeld et al., “Status of the Injector System for the Synchrotron Light Source ANKA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP70, pp. 2427-2429.
Back to search