Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Bira, L. Ferreira, G. Rosaz, and A.-M. Valente-Feliciano, “Characterization and modeling of electropolishing for copper cavities in superconducting applications”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB074, unpublished.
[n] S.-K. Lee, B. H. Choi, K. R. Kim, HR. Lee, and B.-S. Park, “Characteristic Experimentations of Degrader and Scatterer at MC-50 Cyclotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP013, pp. 1356-1358.
[n] S. Kato, S. Azuma, M. Nishiwaki, P. V. Tyagi, and F. Yamamoto, “Application of Electrochemical Buffing onto Niobium SRF Cavity Surface”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC018, pp. 2929-2931.
[n] A. A. Garren, E. L. Molishever, J. M. Peterson, and R. C. Sah, “A Superconducting Proton Storage Ring for PEP”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3261-3264.
[n] CH. Yu, W.-H. Huang, X. Shen, and C.-X. Tang, “Optical Stochastic Cooling in a Low Energy Electron Storage Ring for a Compact X-Ray Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP034, pp. 4378-4380.
[n] P. Goudket et al., “Surface Resistance RF Measurements of Materials Used for Accelerator Vacuum Chambers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3235-3238. doi:10.18429/JACoW-IPAC2015-WEPHA053
[n] A. V. Elzhov and E. A. Perelstein, “INFLUENCE OF PHASE SHIFT OF ACCOMPANYING WAVE ON ELECTRON DYNAMICS IN TWO-BEAM ACCELERATOR DRIVER”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP05, pp. XX-XX.
[n] B. Zipfel et al., “Experimental results on longitudinal RF beam phase feedback in the heavy-ion synchrotron SIS18”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3329-3332. doi:10.18429/JACoW-IPAC2024-THPG33
[n] P. Cheng, Z. Li, J. Y. Tang, and J. Q. Wang, “Simulation of Longitudinal Beam Instability caused by HOMs”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP212, pp. 73-77.
[n] S. A. Averichev et al., “Progress in Manufactoring Main Nuclotron Extraction Elements”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP075G, pp. 2435-2437.
[n] P. V. Tyagi, M. Doleans, S.-H. Kim, R. Afanador, and C. J. McMahan, “Plasma Processing of Nb Surfaces for SRF Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP115, pp. 323-325.
[n] J. S. Eldred, M. Backfish, C.-Y. Tan, and R. M. Zwaska, “Electron Cloud Measurements in Fermilab Main Injector and Recycler”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 604-607. doi:10.18429/JACoW-IPAC2015-MOPMA027
[n] M. Sawabe, H. Hayano, S. Kato, M. Nishiwaki, T. Saeki, and P. V. Tyagi, “Long-period Monitoring of Electro-polishing Electrolyte in EP Facility at KEK”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC027, pp. 2947-2949.
[n] R. M. Reimers, R. C. Wolgast, and R. M. Yamamoto, “Magnet Coil System for a Superconducting Spectrometer (HISS)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2911-2914.
[n] W. T. Kitka et al., “Control System of the ForMAX Beamline at the MAX IV Synchrotron”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1402-1405. doi:10.18429/JACoW-ICALEPCS2023-THPDP040
[n] D. A. Spence, B. F. Gavin, R. Peters, L. L. Reginato, B. H. Smith, and R. C. Wolgast, “A 3-MV Injsector for the Superhilac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 97-102.
[n] M. L. Lopes et al., “Magnetic Design Constraints of Helical Solenoids”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2731-2733. doi:10.18429/JACoW-IPAC2014-WEPRI100
[n] E. Blanco Vinuela et al., “UNICOS Evolution: CPC Version 6”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS006, pp. 786-789.
[n] V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 228-231. doi:10.18429/JACoW-NAPAC2019-MOPLH25
[n] R. M. Main, M. R. Curtis, R. Grazier, P. B. Kennedy, and D. A. Spence, “A Small Helium-3 Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 733-740.
[n] A. J. May et al., “Commissioning of the UKRI STFC Daresbury Vertical Test Facility for Jacketed SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 308. doi:10.18429/JACoW-SRF2021-MOPFAV002
[n] J. S. Lunsford, R. F. Bentley, and G. P. Lawrence, “Versatile H Beam Chopper System at LAMPF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3433-3436.
[n] S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3249-3252. doi:10.18429/JACoW-IPAC2015-WEPHA059
[n] K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
[n] A. L. Karuzskii, “Local Electric Field Microwave Electrodynamics of High -Tc Superconducting Metal Oxides”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B10, pp. 362-365.
[n] C. Spies, M. Glesner, and H. Klingbeil, “Model-Based Analysis of Digital Signal Processing Blocks in a Beam Phase Control System”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEP13, pp. 164-166.
[n] J. Rochez, E. B. Blanco Vinuela, M. Koutli, and T. Petrou, “Opening the Floor to PLCs and IPCs: CODESYS in UNICOS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC033, pp. 147-150.
[n] T. Elioff, R. J. Force, W. D. Hartsough, and K. H. Lou, “Bevatron External Proton Beam Facilities”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 172-174.
[n] J. J. Barale, K. C. Crebbin, J. W. Lax, R. M. Richter, and E. Zajec, “Secondary Emission Monitors at the Bevatron-Bevalac”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3412-3415.
[n] V. Yu. Zaslavsky et al., “Terahertz Band FEL with Advanced Bragg Reflectors”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC78, pp. 424-427.
[n] E. A. Perelstein, L. V. Bobyleva, A. V. Elzhov, and V. I. Kazacha, “Theoretical Study of Power Relativistic Amplifiers for Electron Beam Bunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W020, pp. 488-490.
[n] A. Kiourkos, P. Golonka, M. Gonzalez-Berges, S. Infante, and J-C. Tournier, “Centralized Data Engineering for the Monitoring of the CERN Electrical Network”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC023, pp. 107-110.
[n] M. Ge et al., “Recent progress on HF-free surface treatment by bipolar pulsed electropolishing for SRF Nb cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 790-792. doi:10.18429/JACoW-LINAC2024-THPB081
[n] M. P. Howell et al., “History of Cryomodule Repairs at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP109, pp. 1108-1110.
[n] J. S. Eldred and R. M. Zwaska, “Proposed Cavity for Reduced Slip-Stacking Loss”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 600-603. doi:10.18429/JACoW-IPAC2015-MOPMA026
[n] S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
[n] L. N. Drosdal et al., “Investigations of SPS Orbit Drifts”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 852-854. doi:10.18429/JACoW-IPAC2014-MOPRI100
[n] J-C. Tournier et al., “New Electrical Network Supervision for CERN: Simpler, Safer, Faster, and Including New Modern Features”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB01, pp. 27-30.
[n] R. Arcidiacono et al., “CMS DCS Design Concepts”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_062.
[n] I. A. Shelaev et al., “General Design Features of the Four-Meter Isochronous Cyclotron at Dubna with a Smoothly Variable Heavy Ion Energy”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 332-335.
[n] R. P. Johnson, H. P. Bluem, B. C. Craft, R. C. Sah, and D. Y. Wang, “Commissioning of the Synchrotron Light Source at LSU”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 197-200.
[n] A. Zaytsev et al., “Virtualized High Performance Computing Infrastructure of Novosibirsk Scientific Center”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEBHAUST06, pp. 630-633.
[n] M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, and J. Rossbach, “Design of a Normal Conducting Cavity for Arrival Time Stabilization at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2818-2821. doi:10.18429/JACoW-IPAC2015-WEPMA029
[n] P. Schnizer et al., “Advanced Multipoles and Appropriated Measurement Tools for Field Characterization of SIS100 Magnets”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2805-2808. doi:10.18429/JACoW-IPAC2015-WEPMA023
[n] N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
[n] A. M. M. Todd et al., “Commissioning Status of the Fritz Haber Institute THz FEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC106, pp. 3137-3139.
[n] Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, H. S. Song, and S. D. Yang, “Deep Learning Based Predictive Control for RFT-30 Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2230-2232. doi:10.18429/JACoW-IPAC2018-WEPAL030
[n] S. Pfeiffer et al., “Status Update of the Fast Energy Corrector Cavity at FLASH”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 112-114. doi:10.18429/JACoW-LINAC2018-MOPO039
[n] S. Tokura et al., “Very High-Field Short-Pulse Dipole Magnet for Compact Proton Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH115, pp. 3117-3119.
[n] K. H. Gil, H. J. Choi, and J.-H. Lim, “Automatic Microbeam Focusing for X-Ray Microbeam Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 220-222. doi:10.18429/JACoW-IPAC2016-MOPMB057
[n] V. N. Buldakovsky et al., “Beam Injection into the Nuclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P011, pp. 184-186.
[n] R. C. Wolgast and J. W. Davis, “Tests of a Fail-Safe Vacuum Beam Line Using Acoustic Delay and a Fast Closing Valve”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 954-956.
[n] CH. Yu, W.-H. Huang, C.-X. Tang, and Y. Wang, “BEAM DYNAMICS IN THE LASER-ELECTRON STORAGE RING FOR A COMPTON X-RAY SOURCE”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC053, pp. 187-189.
[n] I. A. Shelaev et al., “Acceleration of Xe Ions in the JINR Tandem-Cyclotrons (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 232-243.
[n] R. F. Bentley, G. P. Lawrence, and J. S. Lunsford, “Pulsed Beam Chopper for LAMPF”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1526-1529.
[n] M. Ge, A.-M. Valente-Feliciano, R. Ruber, R.-L. Geng, S. Balachandran, and T. Powers, “Particle measurement on all-metal gate valve for CEBAF beamline via laser-based particle counter”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 786-789. doi:10.18429/JACoW-LINAC2024-THPB080
[n] D. M. Evans, “Introductory Remarks for the Panel Discussion on Computer Control”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 337-338.
[n] R. C. Sah, “The Advanced Light Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3100-3103.
[n] C. Chang et al., “First Results of Energy Measurements with a Compact Compton Backscattering Setup at ANKA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 876-878. doi:10.18429/JACoW-IPAC2015-MOPHA040
[n] D. A. Turner et al., “Magnetic Field Penetration of Niobium Thin Films Produced by the ARIES Collaboration”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 77. doi:10.18429/JACoW-SRF2021-SUPFDV007
[n] M. Nishiwaki, H. Hayano, S. Kato, T. Saeki, M. Sawabe, and P. V. Tyagi, “Surface Study on Niobium Stain after Electro-polishing for Super-conducting RF Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC023, pp. 2941-2943.
[n] S. V. Ivanov, “Status of U-70”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 55-59. doi:10.18429/JACoW-RUPAC2018-WEXMH01
[n] A. V. Maximov et al., “The Carbon Ion Beam Extraction Scheme From the U-70 Synchrotron for Radiobiological Researches”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 139-141. doi:10.18429/JACoW-RUPAC2018-FRCAMH01
[n] S. V. Kuzikov, A. A. Bogdashov, G. G. Denisov, K. M. Schirm, I. Syratchev, and A. A. Vikharev, “A 12 GHz Pulse Compressor and Components for CLIC Test Stand”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA005, pp. 44-46.
[n] G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n] A. L. Karuzskii, V. A. Dravin, A. E. Krapivka, N. A. Osipova, and A. V. Perestoronin, “Measurements of the Effective Electrodynamical Parameters of Nb Microstrip Resonator”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP013, pp. 190-194.
[n] M. Fukuda, K. Arakawa, T. Karasawa, and S. Okumura, “External Beam Phase Width Measurements at the JAERI AVF Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 548-551.
[n] R. C. Wolgast, “Vacuum Cryopumping a Heavy Ion Source in a High Voltage Terminal”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 699-703.
[n] H. J. Choi, M. S. Chae, J. H. Hong, H.-S. Kang, and S. J. Park, “Results Produced after Measuring PAL-ITF Beam Diagnostic Instruments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2903-2905. doi:10.18429/JACoW-IPAC2014-THPRO021
[n] D. B. Tikhonov et al., “Investigation of SIS Multilayer Films at HZB”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 72. doi:10.18429/JACoW-SRF2021-SUPFDV006
[n] S. Pavis, E. Carlier, C. A. Lolliot, and N. Magnin, “Early Fire Detection in High Power Equipment”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 775-779. doi:10.18429/JACoW-ICALEPCS2023-TUPDP096
[n] A. R. Borden and R. C. Wolgast, “Mechanically Improved Rectangular Cable”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3399-3402.
[n] N. Fukunishi et al., “New High-energy Beam Transport Line Dedicated to Biological Applications in RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA04, pp. 42-44.
[n] F. A. Samman, M. Glesner, C. Spies, and S. Surapong, “Floating-point-based Hardware Accelerator of a Beam Phase-Magnitude Detector and Filter for a Beam Phase Control System in a Heavy-Ion Synchrotron Application”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU001, pp. 683-686.
[n] J. A. G. Hamilton, M. Gonzalez-Berges, B. Schofield, and J-C. Tournier, “SCADA Statistics Monitoring Using the Elastic Stack (Elasticsearch, Logstash, Kibana)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 451-455. doi:10.18429/JACoW-ICALEPCS2017-TUPHA034
[n] M. Fakhari et al., “Design of New Buncher Cavity for Relativistic Electron Gun for Atomic Exploration ÔÇô REGAE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3840-3843. doi:10.18429/JACoW-IPAC2014-THPRI033
[n] C. Baumgarten, “Transverse-Longitudinal Coupling by Space Charge in Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE2PB03, pp. 315-319.
[n] S. A. Kahn, G. Flanagan, F. Marhauser, M. L. Lopes, and K. Yonehara, “Conceptual Design of the Muon Cooling Channel to Incorporate RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1325-1327. doi:10.18429/JACoW-IPAC2014-TUPRO116
[n] A. Susini and R. Ahgren, “Design and Operation of the RF-System for the Vicksi Cyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1710-1713.
[n] M. Fukuda et al., “Beam Studies of Injection to Extraction System for JAERI AVF Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-02, pp. 423-426.
[n] M. Kowalska et al., “Feasibility Studies for 100 GeV Beam Transfer Lines for a CERN Neutrino Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 849-851. doi:10.18429/JACoW-IPAC2014-MOPRI099
[n] G. R. D. Plateau et al., “Optimization and Single-Shot Characterization of Ultrashort THz Pulses from a Laser Plasma Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP008, pp. 4548-4550.
[n] M. Shimada, K. Yokoya, R. Hajima, and M. Tecimer, “Proposal of 6 GeV Energy Recovery Linac Hybrid Machine”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3254-3256. doi:10.18429/JACoW-IPAC2016-THPMB013
[n] M. K. Park, G. S. Lee, J. T. Noh, J. Y Huang, and I. S. Ko, “The Interlock System For U7 Undulator in PLS”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D008, pp. 686-688.
[n] G. Moreno et al., “Effect of High-Magnetic Field Region Geometry on the Efficiency of a 750 MHz IH Structure”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 150-153. doi:10.18429/JACoW-LINAC2022-MOPOGE05
[n] J. T. Maniscalco, D. L. Hall, M. Liepe, O. B. Malyshev, R. Valizadeh, and S. Wilde, “New Material Studies in the Cornell Sample Host Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2338-2340. doi:10.18429/JACoW-IPAC2016-WEPMR029
[n] C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 342-344. doi:10.18429/JACoW-Cyclotrons2016-THP16
[n] R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2818-2821. doi:10.18429/JACoW-IPAC2019-WEPRB011
[n] B. Zipfel and P. Moritz, “Recent Progress on the Technical Realization of the Bunch Phase Timing System BuTiS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC145, pp. 418-420.
[n] S. Nakajima and K. Ikegami, “The Vacuum System of the IPCR SSC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-42, pp. 537-539.
[n] A. O. Sezgin et al., “Low Tc Superconducting Thin Film-Based Multilayer (S(I)S) Structures for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPTEV005, pp..
[n] S. V. Ivanov, “Accelerator Complex U70 of IHEP: Present Status and Recent Upgrades”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHZ01, pp. 27-31.
[n] A. J. Jason and R. Woods, “The Los Alamos Study for a Next-Generation Spallation-Neutron-Source Driver”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2684-2687.
[n] L. Sabato et al., “Longitudinal Phase Space Measurement at the ELI-NP Compton Gamma Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 732-735. doi:10.18429/JACoW-IBIC2016-WEPG44
[n] M. Hourican, B. Balhan, C. C. M. Borburgh, T. Masson, and A. Sanz Ull, “Validation of the CERN PS Eddy Current Injection Septa”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 768-771. doi:10.18429/JACoW-IPAC2018-TUPAF037
[n] O. A. Plotnikova, V. I. Kaplin, and S. E. Karnaev, “Architecture of VEPP-4M Collider's Interlock System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP095, pp. XX-XX.
[n] P. Pizzol et al., “CVD Deposition of Nb Based Materials for SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2241-2244. doi:10.18429/JACoW-IPAC2016-WEPMB056
[n] M. Oskarsson et al., “MXCuBE3 Bringing MX Experiments to the WEB”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 180-185. doi:10.18429/JACoW-ICALEPCS2017-TUBPL05
[n] V. A. Andreev et al., “Development of the ITEP 27 MHz Heavy Ion RFQ”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W024, pp. 1090-1092.
[n] R. R. Steerenberg et al., “Nominal LHC Beam Instability Observations in the CERN Proton Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN076, pp. 4222-4224.
[n] R. W. Allison et al., “Digital Control of the Bevatron-Injector Inflection Trajectory”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IX-07, pp. 483-490.
[n] A. Medvids et al., “Improvement of Mechanical and Magnetic Properties of Nb/cu Structure by Laser Radiation for SRF Applications”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV003, pp..
[n] M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, J. Rossbach, and A. Yahaghi, “Thermal Simulation of an Energy Feedback Normal Conducting RF Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 396-398. doi:10.18429/JACoW-IPAC2016-MOPMW003
[n] G. V. Romanov et al., “CW Room-Temperature Bunching Cavity for the Project X MEBT”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP221, pp. 1900-1902.
[n] M. Tecimer, “High Power Coupled FEL Oscillators for the Generation of High Repetition Rate Ultrashort Mid-IR Pulses”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP074, pp. 532-536.
[n] D. E. M. Lens et al., “Bunch Merging and Compression: Recent Progress with RF and LLRF Systems for FAIR”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 67-71. doi:10.18429/JACoW-HIAT2022-TUP03
[n] D. Brodzik et al., “The 50-MeV Bevatron Injection Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 923-928.
[n] W. Lawson et al., “Operating Characteristics of 17.14 GHz Frequency-Doubling Coaxial Gyroklystrons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH080, pp. 954-956.
[n] T. Lauritzen and R. C. Sah, “The PEP Liquid Level System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2876-2879.
[n] N. S. Ginzburg, A. Malkin, A. Sergeev, V. Yu. Zaslavsky, and I. V. Zotova, “Quasi-optical Theory of Terahertz Superradiance from an Extended Electron Bunch”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP016, pp. 391-394.
[n] S. Bira et al., “Multipacting Analysis of the Quadripolar Resonator (QPR) at HZB”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 42. doi:10.18429/JACoW-SRF2021-SUPCAV013
[n] F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
[n] W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 919-922. doi:10.18429/JACoW-ICALEPCS2015-WEPGF094
[n] R. C. Wolgast, “Design of the Cryopumping Vacuum System for ESCAR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1496-1500.
[n] B. C. Barish and K. Yokoya, “Report on ILC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper MOZMA01, pp. XX-XX.
[n] W. S. Graves, K. K. Berggren, F. X. Kaertner, D. E. Moncton, and P. Piot, “Compact XFEL Light Source”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO24, pp. 757-761.
[n] M. Arbel and A. Eichenbaum, “Electron Beam Diagnostics Using Radiation from a Free Electron Laser”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF33, pp. 593-596.
[n] K. H. Lou, J. M. Hauptman, and J. E. Walter, “High-Quality Narrow Quadrupole Magnets”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 736-738.
[n] D. M. Evans and F. H. G. Lothrop, “Digital Control of Bevatron Acceleration Cycle”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 394-399.
[n] L. M. Sevryukova, A. M. Korotkov, and S. M. Pesterev, “Feasibilities of the Methods of Anode Oxipolishing and Anodization in the Technology of Superconducting Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I28, pp. XX-XX.
[n] K. Yokoya, “ILC Parameters Rationale and Challenges”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper MOZMA02, pp. XX-XX.
[n] S. A. Strekalovskikh, “Status of Linacs with High-frequency Quadrupole Focusing LU-30 and LU-30M in IHEP”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC01, pp. 312-314.
[n] F. Geslin, P. Blache, M. Chabot, J. Lesrel, Ch. L. Lievin, and S. Sierra, “Development of 704.4 MHz Power Coupler Window for Myrrha Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 776-778. doi:10.18429/JACoW-LINAC2016-THPRC006
[n] S. V. Ivanov, “Acceleration of Deuterons up to 23.6 GeV per Nucleon through I100, U1.5, and U70 of IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHA02, pp. 130-132.
[n] J. A. Uythoven et al., “Injection Protection Upgrade for the HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2136-2139. doi:10.18429/JACoW-IPAC2015-TUPTY051
[n] M. Fukuda et al., “Estimation of a Beam Centering Error in the JAERI AVF Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-14, pp. 499-502.
[n] J. Y. Huang, W.-H. Hwang, D. T. Kim, S. H. Nam, and S. J. Park, “Improved Closed Orbit Measurement System for PLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH074, pp. 1384-1386.
[n] H. J. Choi, J. H. Han, H.-S. Kang, S. H. Kim, H.-G. Lee, and S. B. Lee, “HLS System to Measure the Location Changes in Real Time of PAL-XFEL Devices”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2345-2348. doi:10.18429/JACoW-IPAC2018-WEPAL070
[n] M. Cavenago, M. Morvillo, and A. M. Porcellato, “High Resolution Bead Technique Measurements and Multipole Analysis”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP036L, pp. 1982-1984.
[n] M. Morvillo et al., “PS 13.3-20 MHz RF Systems for LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB053, pp. 1724-1726.
[n] Y. Socol, “Changing Attitude to Radiation Hazards and Consequent Opportunities for LINAC Applications”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB051, pp. 288-290.
[n] L. Masetti et al., “Increasing Availability by Implementing Software Redundancy in the CMS Detector Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 717-720. doi:10.18429/JACoW-ICALEPCS2015-WEPGF013
[n] P. V. Tyagi, H. Hayano, S. Kato, M. Nishiwaki, T. Saeki, and M. Sawabe, “Various Rinsing Effects to Mitigate Contaminates Brought by BCP on Niobium SRF Cavity Surface”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC034, pp. 2968-2970.
[n] M. W. McGee, T. T. Arkan, S. Barbanotti, E. Borissov, J. R. Leibfritz, and W. Schappert, “Transport of DESY 1.3 GHz Cryomodule at Fermilab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP051, pp. 1662-1664.
[n] P. Moschovakos, D. Ecker, J. B. Olesen, V. Ryjov, and S. Schlenker, “The Embedded Monitoring Processor for High Luminosity LHC”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1470-1474. doi:10.18429/JACoW-ICALEPCS2023-THPDP063
[n] D. E. McMillan, M. W. Collins, and R. Woods, “The LASL Multi-Computer Van de Graaf Control and Graphic Display System and Experiments wtih Automatic Beam Optimization”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 389-394.
[n] A. Sanz Ull, M. G. Atanasov, B. Balhan, and J. C. C. M, “Alternative Proposal for FCC-hh Extraction Septa”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4248-4251. doi:10.18429/JACoW-IPAC2019-THPTS062
For LaTeX
Use Complete Form
For BibTeX
References
- S. Bira, L. Ferreira, G. Rosaz, and A.-M. Valente-Feliciano, “Characterization and modeling of electropolishing for copper cavities in superconducting applications”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB074, unpublished.
- S.-K. Lee, B. H. Choi, K. R. Kim, HR. Lee, and B.-S. Park, “Characteristic Experimentations of Degrader and Scatterer at MC-50 Cyclotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP013, pp. 1356-1358.
- S. Kato, S. Azuma, M. Nishiwaki, P. V. Tyagi, and F. Yamamoto, “Application of Electrochemical Buffing onto Niobium SRF Cavity Surface”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC018, pp. 2929-2931.
- A. A. Garren, E. L. Molishever, J. M. Peterson, and R. C. Sah, “A Superconducting Proton Storage Ring for PEP”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3261-3264.
- CH. Yu, W.-H. Huang, X. Shen, and C.-X. Tang, “Optical Stochastic Cooling in a Low Energy Electron Storage Ring for a Compact X-Ray Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP034, pp. 4378-4380.
- P. Goudket et al., “Surface Resistance RF Measurements of Materials Used for Accelerator Vacuum Chambers”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3235-3238.
- A. V. Elzhov and E. A. Perelstein, “INFLUENCE OF PHASE SHIFT OF ACCOMPANYING WAVE ON ELECTRON DYNAMICS IN TWO-BEAM ACCELERATOR DRIVER”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP05, pp. XX-XX.
- B. Zipfel et al., “Experimental results on longitudinal RF beam phase feedback in the heavy-ion synchrotron SIS18”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG33, pp. 3329-3332.
- P. Cheng, Z. Li, J. Y. Tang, and J. Q. Wang, “Simulation of Longitudinal Beam Instability caused by HOMs”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP212, pp. 73-77.
- S. A. Averichev et al., “Progress in Manufactoring Main Nuclotron Extraction Elements”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP075G, pp. 2435-2437.
- P. V. Tyagi, M. Doleans, S.-H. Kim, R. Afanador, and C. J. McMahan, “Plasma Processing of Nb Surfaces for SRF Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP115, pp. 323-325.
- J. S. Eldred, M. Backfish, C.-Y. Tan, and R. M. Zwaska, “Electron Cloud Measurements in Fermilab Main Injector and Recycler”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 604-607.
- M. Sawabe, H. Hayano, S. Kato, M. Nishiwaki, T. Saeki, and P. V. Tyagi, “Long-period Monitoring of Electro-polishing Electrolyte in EP Facility at KEK”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC027, pp. 2947-2949.
- R. M. Reimers, R. C. Wolgast, and R. M. Yamamoto, “Magnet Coil System for a Superconducting Spectrometer (HISS)”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2911-2914.
- W. T. Kitka et al., “Control System of the ForMAX Beamline at the MAX IV Synchrotron”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP040, pp. 1402-1405.
- D. A. Spence, B. F. Gavin, R. Peters, L. L. Reginato, B. H. Smith, and R. C. Wolgast, “A 3-MV Injsector for the Superhilac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 97-102.
- M. L. Lopes et al., “Magnetic Design Constraints of Helical Solenoids”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2731-2733.
- E. Blanco Vinuela et al., “UNICOS Evolution: CPC Version 6”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS006, pp. 786-789.
- V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 228-231.
- R. M. Main, M. R. Curtis, R. Grazier, P. B. Kennedy, and D. A. Spence, “A Small Helium-3 Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 733-740.
- A. J. May et al., “Commissioning of the UKRI STFC Daresbury Vertical Test Facility for Jacketed SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 308.
- J. S. Lunsford, R. F. Bentley, and G. P. Lawrence, “Versatile H Beam Chopper System at LAMPF”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3433-3436.
- S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3249-3252.
- K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
- A. L. Karuzskii, “Local Electric Field Microwave Electrodynamics of High -Tc Superconducting Metal Oxides”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B10, pp. 362-365.
- C. Spies, M. Glesner, and H. Klingbeil, “Model-Based Analysis of Digital Signal Processing Blocks in a Beam Phase Control System”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEP13, pp. 164-166.
- J. Rochez, E. B. Blanco Vinuela, M. Koutli, and T. Petrou, “Opening the Floor to PLCs and IPCs: CODESYS in UNICOS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC033, pp. 147-150.
- T. Elioff, R. J. Force, W. D. Hartsough, and K. H. Lou, “Bevatron External Proton Beam Facilities”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 172-174.
- J. J. Barale, K. C. Crebbin, J. W. Lax, R. M. Richter, and E. Zajec, “Secondary Emission Monitors at the Bevatron-Bevalac”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3412-3415.
- V. Yu. Zaslavsky et al., “Terahertz Band FEL with Advanced Bragg Reflectors”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC78, pp. 424-427.
- E. A. Perelstein, L. V. Bobyleva, A. V. Elzhov, and V. I. Kazacha, “Theoretical Study of Power Relativistic Amplifiers for Electron Beam Bunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W020, pp. 488-490.
- A. Kiourkos, P. Golonka, M. Gonzalez-Berges, S. Infante, and J-C. Tournier, “Centralized Data Engineering for the Monitoring of the CERN Electrical Network”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC023, pp. 107-110.
- M. Ge et al., “Recent progress on HF-free surface treatment by bipolar pulsed electropolishing for SRF Nb cavities”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 790-792.
- M. P. Howell et al., “History of Cryomodule Repairs at SNS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP109, pp. 1108-1110.
- J. S. Eldred and R. M. Zwaska, “Proposed Cavity for Reduced Slip-Stacking Loss”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 600-603.
- S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
- L. N. Drosdal et al., “Investigations of SPS Orbit Drifts”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 852-854.
- J-C. Tournier et al., “New Electrical Network Supervision for CERN: Simpler, Safer, Faster, and Including New Modern Features”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOBAB01, pp. 27-30.
- R. Arcidiacono et al., “CMS DCS Design Concepts”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_062.
- I. A. Shelaev et al., “General Design Features of the Four-Meter Isochronous Cyclotron at Dubna with a Smoothly Variable Heavy Ion Energy”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 332-335.
- R. P. Johnson, H. P. Bluem, B. C. Craft, R. C. Sah, and D. Y. Wang, “Commissioning of the Synchrotron Light Source at LSU”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 197-200.
- A. Zaytsev et al., “Virtualized High Performance Computing Infrastructure of Novosibirsk Scientific Center”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEBHAUST06, pp. 630-633.
- M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, and J. Rossbach, “Design of a Normal Conducting Cavity for Arrival Time Stabilization at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2818-2821.
- P. Schnizer et al., “Advanced Multipoles and Appropriated Measurement Tools for Field Characterization of SIS100 Magnets”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2805-2808.
- N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
- A. M. M. Todd et al., “Commissioning Status of the Fritz Haber Institute THz FEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC106, pp. 3137-3139.
- Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, H. S. Song, and S. D. Yang, “Deep Learning Based Predictive Control for RFT-30 Cyclotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2230-2232.
- S. Pfeiffer et al., “Status Update of the Fast Energy Corrector Cavity at FLASH”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 112-114.
- S. Tokura et al., “Very High-Field Short-Pulse Dipole Magnet for Compact Proton Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH115, pp. 3117-3119.
- K. H. Gil, H. J. Choi, and J.-H. Lim, “Automatic Microbeam Focusing for X-Ray Microbeam Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 220-222.
- V. N. Buldakovsky et al., “Beam Injection into the Nuclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P011, pp. 184-186.
- R. C. Wolgast and J. W. Davis, “Tests of a Fail-Safe Vacuum Beam Line Using Acoustic Delay and a Fast Closing Valve”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 954-956.
- CH. Yu, W.-H. Huang, C.-X. Tang, and Y. Wang, “BEAM DYNAMICS IN THE LASER-ELECTRON STORAGE RING FOR A COMPTON X-RAY SOURCE”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC053, pp. 187-189.
- I. A. Shelaev et al., “Acceleration of Xe Ions in the JINR Tandem-Cyclotrons (Invited paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 232-243.
- R. F. Bentley, G. P. Lawrence, and J. S. Lunsford, “Pulsed Beam Chopper for LAMPF”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1526-1529.
- M. Ge, A.-M. Valente-Feliciano, R. Ruber, R.-L. Geng, S. Balachandran, and T. Powers, “Particle measurement on all-metal gate valve for CEBAF beamline via laser-based particle counter”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 786-789.
- D. M. Evans, “Introductory Remarks for the Panel Discussion on Computer Control”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 337-338.
- R. C. Sah, “The Advanced Light Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3100-3103.
- C. Chang et al., “First Results of Energy Measurements with a Compact Compton Backscattering Setup at ANKA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 876-878.
- D. A. Turner et al., “Magnetic Field Penetration of Niobium Thin Films Produced by the ARIES Collaboration”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 77.
- M. Nishiwaki, H. Hayano, S. Kato, T. Saeki, M. Sawabe, and P. V. Tyagi, “Surface Study on Niobium Stain after Electro-polishing for Super-conducting RF Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC023, pp. 2941-2943.
- S. V. Ivanov, “Status of U-70”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 55-59.
- A. V. Maximov et al., “The Carbon Ion Beam Extraction Scheme From the U-70 Synchrotron for Radiobiological Researches”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 139-141.
- S. V. Kuzikov, A. A. Bogdashov, G. G. Denisov, K. M. Schirm, I. Syratchev, and A. A. Vikharev, “A 12 GHz Pulse Compressor and Components for CLIC Test Stand”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA005, pp. 44-46.
- G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2240-2243.
- A. L. Karuzskii, V. A. Dravin, A. E. Krapivka, N. A. Osipova, and A. V. Perestoronin, “Measurements of the Effective Electrodynamical Parameters of Nb Microstrip Resonator”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP013, pp. 190-194.
- M. Fukuda, K. Arakawa, T. Karasawa, and S. Okumura, “External Beam Phase Width Measurements at the JAERI AVF Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 548-551.
- R. C. Wolgast, “Vacuum Cryopumping a Heavy Ion Source in a High Voltage Terminal”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 699-703.
- H. J. Choi, M. S. Chae, J. H. Hong, H.-S. Kang, and S. J. Park, “Results Produced after Measuring PAL-ITF Beam Diagnostic Instruments”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2903-2905.
- D. B. Tikhonov et al., “Investigation of SIS Multilayer Films at HZB”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 72.
- S. Pavis, E. Carlier, C. A. Lolliot, and N. Magnin, “Early Fire Detection in High Power Equipment”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP096, pp. 775-779.
- A. R. Borden and R. C. Wolgast, “Mechanically Improved Rectangular Cable”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3399-3402.
- N. Fukunishi et al., “New High-energy Beam Transport Line Dedicated to Biological Applications in RIKEN RI Beam Factory”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA04, pp. 42-44.
- F. A. Samman, M. Glesner, C. Spies, and S. Surapong, “Floating-point-based Hardware Accelerator of a Beam Phase-Magnitude Detector and Filter for a Beam Phase Control System in a Heavy-Ion Synchrotron Application”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU001, pp. 683-686.
- J. A. G. Hamilton, M. Gonzalez-Berges, B. Schofield, and J-C. Tournier, “SCADA Statistics Monitoring Using the Elastic Stack (Elasticsearch, Logstash, Kibana)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 451-455.
- M. Fakhari et al., “Design of New Buncher Cavity for Relativistic Electron Gun for Atomic Exploration ÔÇô REGAE”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3840-3843.
- C. Baumgarten, “Transverse-Longitudinal Coupling by Space Charge in Cyclotrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WE2PB03, pp. 315-319.
- S. A. Kahn, G. Flanagan, F. Marhauser, M. L. Lopes, and K. Yonehara, “Conceptual Design of the Muon Cooling Channel to Incorporate RF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1325-1327.
- A. Susini and R. Ahgren, “Design and Operation of the RF-System for the Vicksi Cyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1710-1713.
- M. Fukuda et al., “Beam Studies of Injection to Extraction System for JAERI AVF Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXB-02, pp. 423-426.
- M. Kowalska et al., “Feasibility Studies for 100 GeV Beam Transfer Lines for a CERN Neutrino Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 849-851.
- G. R. D. Plateau et al., “Optimization and Single-Shot Characterization of Ultrashort THz Pulses from a Laser Plasma Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP008, pp. 4548-4550.
- M. Shimada, K. Yokoya, R. Hajima, and M. Tecimer, “Proposal of 6 GeV Energy Recovery Linac Hybrid Machine”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3254-3256.
- M. K. Park, G. S. Lee, J. T. Noh, J. Y Huang, and I. S. Ko, “The Interlock System For U7 Undulator in PLS”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D008, pp. 686-688.
- G. Moreno et al., “Effect of High-Magnetic Field Region Geometry on the Efficiency of a 750 MHz IH Structure”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 150-153.
- J. T. Maniscalco, D. L. Hall, M. Liepe, O. B. Malyshev, R. Valizadeh, and S. Wilde, “New Material Studies in the Cornell Sample Host Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2338-2340.
- C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 342-344.
- R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2818-2821.
- B. Zipfel and P. Moritz, “Recent Progress on the Technical Realization of the Bunch Phase Timing System BuTiS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC145, pp. 418-420.
- S. Nakajima and K. Ikegami, “The Vacuum System of the IPCR SSC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-42, pp. 537-539.
- A. O. Sezgin et al., “Low Tc Superconducting Thin Film-Based Multilayer (S(I)S) Structures for SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPTEV005, pp..
- S. V. Ivanov, “Accelerator Complex U70 of IHEP: Present Status and Recent Upgrades”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHZ01, pp. 27-31.
- A. J. Jason and R. Woods, “The Los Alamos Study for a Next-Generation Spallation-Neutron-Source Driver”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2684-2687.
- L. Sabato et al., “Longitudinal Phase Space Measurement at the ELI-NP Compton Gamma Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 732-735.
- M. Hourican, B. Balhan, C. C. M. Borburgh, T. Masson, and A. Sanz Ull, “Validation of the CERN PS Eddy Current Injection Septa”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 768-771.
- O. A. Plotnikova, V. I. Kaplin, and S. E. Karnaev, “Architecture of VEPP-4M Collider's Interlock System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP095, pp. XX-XX.
- P. Pizzol et al., “CVD Deposition of Nb Based Materials for SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2241-2244.
- M. Oskarsson et al., “MXCuBE3 Bringing MX Experiments to the WEB”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 180-185.
- V. A. Andreev et al., “Development of the ITEP 27 MHz Heavy Ion RFQ”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W024, pp. 1090-1092.
- R. R. Steerenberg et al., “Nominal LHC Beam Instability Observations in the CERN Proton Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN076, pp. 4222-4224.
- R. W. Allison et al., “Digital Control of the Bevatron-Injector Inflection Trajectory”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IX-07, pp. 483-490.
- A. Medvids et al., “Improvement of Mechanical and Magnetic Properties of Nb/cu Structure by Laser Radiation for SRF Applications”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV003, pp..
- M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, J. Rossbach, and A. Yahaghi, “Thermal Simulation of an Energy Feedback Normal Conducting RF Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 396-398.
- G. V. Romanov et al., “CW Room-Temperature Bunching Cavity for the Project X MEBT”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP221, pp. 1900-1902.
- M. Tecimer, “High Power Coupled FEL Oscillators for the Generation of High Repetition Rate Ultrashort Mid-IR Pulses”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP074, pp. 532-536.
- D. E. M. Lens et al., “Bunch Merging and Compression: Recent Progress with RF and LLRF Systems for FAIR”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 67-71.
- D. Brodzik et al., “The 50-MeV Bevatron Injection Linac”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 923-928.
- W. Lawson et al., “Operating Characteristics of 17.14 GHz Frequency-Doubling Coaxial Gyroklystrons”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH080, pp. 954-956.
- T. Lauritzen and R. C. Sah, “The PEP Liquid Level System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2876-2879.
- N. S. Ginzburg, A. Malkin, A. Sergeev, V. Yu. Zaslavsky, and I. V. Zotova, “Quasi-optical Theory of Terahertz Superradiance from an Extended Electron Bunch”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP016, pp. 391-394.
- S. Bira et al., “Multipacting Analysis of the Quadripolar Resonator (QPR) at HZB”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 42.
- F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
- W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 919-922.
- R. C. Wolgast, “Design of the Cryopumping Vacuum System for ESCAR”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1496-1500.
- B. C. Barish and K. Yokoya, “Report on ILC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper MOZMA01, pp. XX-XX.
- W. S. Graves, K. K. Berggren, F. X. Kaertner, D. E. Moncton, and P. Piot, “Compact XFEL Light Source”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO24, pp. 757-761.
- M. Arbel and A. Eichenbaum, “Electron Beam Diagnostics Using Radiation from a Free Electron Laser”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF33, pp. 593-596.
- K. H. Lou, J. M. Hauptman, and J. E. Walter, “High-Quality Narrow Quadrupole Magnets”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 736-738.
- D. M. Evans and F. H. G. Lothrop, “Digital Control of Bevatron Acceleration Cycle”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 394-399.
- L. M. Sevryukova, A. M. Korotkov, and S. M. Pesterev, “Feasibilities of the Methods of Anode Oxipolishing and Anodization in the Technology of Superconducting Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I28, pp. XX-XX.
- K. Yokoya, “ILC Parameters Rationale and Challenges”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper MOZMA02, pp. XX-XX.
- S. A. Strekalovskikh, “Status of Linacs with High-frequency Quadrupole Focusing LU-30 and LU-30M in IHEP”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC01, pp. 312-314.
- F. Geslin, P. Blache, M. Chabot, J. Lesrel, Ch. L. Lievin, and S. Sierra, “Development of 704.4 MHz Power Coupler Window for Myrrha Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 776-778.
- S. V. Ivanov, “Acceleration of Deuterons up to 23.6 GeV per Nucleon through I100, U1.5, and U70 of IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WECHA02, pp. 130-132.
- J. A. Uythoven et al., “Injection Protection Upgrade for the HL-LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2136-2139.
- M. Fukuda et al., “Estimation of a Beam Centering Error in the JAERI AVF Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-14, pp. 499-502.
- J. Y. Huang, W.-H. Hwang, D. T. Kim, S. H. Nam, and S. J. Park, “Improved Closed Orbit Measurement System for PLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH074, pp. 1384-1386.
- H. J. Choi, J. H. Han, H.-S. Kang, S. H. Kim, H.-G. Lee, and S. B. Lee, “HLS System to Measure the Location Changes in Real Time of PAL-XFEL Devices”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2345-2348.
- M. Cavenago, M. Morvillo, and A. M. Porcellato, “High Resolution Bead Technique Measurements and Multipole Analysis”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP036L, pp. 1982-1984.
- M. Morvillo et al., “PS 13.3-20 MHz RF Systems for LHC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB053, pp. 1724-1726.
- Y. Socol, “Changing Attitude to Radiation Hazards and Consequent Opportunities for LINAC Applications”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB051, pp. 288-290.
- L. Masetti et al., “Increasing Availability by Implementing Software Redundancy in the CMS Detector Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 717-720.
- P. V. Tyagi, H. Hayano, S. Kato, M. Nishiwaki, T. Saeki, and M. Sawabe, “Various Rinsing Effects to Mitigate Contaminates Brought by BCP on Niobium SRF Cavity Surface”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC034, pp. 2968-2970.
- M. W. McGee, T. T. Arkan, S. Barbanotti, E. Borissov, J. R. Leibfritz, and W. Schappert, “Transport of DESY 1.3 GHz Cryomodule at Fermilab”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP051, pp. 1662-1664.
- P. Moschovakos, D. Ecker, J. B. Olesen, V. Ryjov, and S. Schlenker, “The Embedded Monitoring Processor for High Luminosity LHC”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP063, pp. 1470-1474.
- D. E. McMillan, M. W. Collins, and R. Woods, “The LASL Multi-Computer Van de Graaf Control and Graphic Display System and Experiments wtih Automatic Beam Optimization”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 389-394.
- A. Sanz Ull, M. G. Atanasov, B. Balhan, and J. C. C. M, “Alternative Proposal for FCC-hh Extraction Septa”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4248-4251.
Back to search