Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268.
[n] J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239.
[n] G. P. A. Berg et al., “Modes of Operation for the Cooler Ring COSY”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O04, pp. 601-604.
[n] F. Belloni et al., “Space Charge Effects Studies for the ESS Cold Linac Beam Profiler”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 371-374. doi:10.18429/JACoW-IBIC2018-WEOC04
[n] L. Arnaudon et al., “Recent Achievements in Transverse Spin-Polarisation at LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 187-190.
[n] A. Luccio, D. J. Clark, D. Elo, P. Frazier, D. Morris, and M. Renkas, “A Polarized Ion Source for the Berkeley 88 - Inch Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 140-145.
[n] A. G. Kobets et al., “Lepta - the Facility for Fundamental and Applied Research”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRXAUD02, pp. 179-181.
[n] R. S. Livingston, “Session IV Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
[n] A. A. Sidorin et al., “A Method for Measuring the Positron Lifetime in Solid Matter with a Continuous Positron Beam”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 267-269. doi:10.18429/JACoW-RUPAC2018-TUPSA58
[n] J. A. Benjamin et al., “Terminal Ion Source System for the Brookhaven Three-Stage Tandem Facility”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 118-123.
[n] H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3587-3590. doi:10.18429/JACoW-IPAC2024-THPR39
[n] J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460.
[n] V. N. Barkovsky, Ju. G. Basargin, R. N. Litunovsky, O. A. Minjaev, A. V. Popov, and A. V. Stepanov, “Ion Optical Studies of Extraction Transport and Analysis Systems for 240-cm Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-005, pp. XX-XX.
[n] G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n] H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179.
[n] A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX.
[n] G. M. Gammel, E. F. Meier, and R. M. Mobley, “Ion Source and Transport System for BNL-HIF Pre-Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-10, pp. 453-456.
[n] B. Podobedov, B. Kushner, S. Ramamoorthy, Y. Tang, and E. Zitvogel, “Fast Digital Orbit Feedback Systems at NSLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA005, pp. 396-398.
[n] A. Ijspeert, A. Puntambekar, and J. Salminen, “Superconducting Sextupole Corrector Magnet for the LHC Main Dipoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP024G, pp. 2252-2254.
[n] K. Crandall, “Error Studies Using PARTRACE, a New Program that Combines PARMILA and TRACE 3-D”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-13, pp. 335-337.
[n] C. Limborg and J. Sebek, “Measurement of High Q RF Cavity Impedance with Beam”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP37C, pp. 972-974.
[n] A. Ando, “New Subaru and Other Light Source Projects in Japan”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A004, pp. 645-652.
[n] M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 703-707.
[n] A. Stillman, “The Slow Control System of the Muon g-2 Experiment”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA09, pp. 2211-2213.
[n] V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
[n] X. D. Yang and Y. J. Yuan, “Commissioning of Electron Cooling in CSRe”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper FRM1MCIO02, pp. 173-177.
[n] R. Stassen, B. Breitkreutz, G. Schug, and H. Stockhorst, “Stochastic Cooling of Heavy Ions in the HESR”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD02, pp. 15-19.
[n] W. Reass, V. P. Derenchuk, D. Rees, T. Rinckel, and G. Visser, “The Klystron RF Systems for the Indiana University LENS Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS027, pp. 2394-2396.
[n] C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
[n] L. Solomon, D. Lynch, J. Safranek, and O. Singh, “Chamber Motion Measurements at the NSLS X-RAY Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA167, pp. 2244-2246.
[n] D. L. Judd and R. S. Livingston, “Closing Remarks”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper Z-001, pp. XX-XX.
[n] G. S. Zanyan, B. Grigoryan, K. Manukyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Booster Design for CANDLE Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC137, pp. 3209-3211.
[n] P. F. Dahl, S. Giordano, J. P. Hannwacker, K. Jellett, G. Parzen, and D. E. Young, “Linac Cavity Field Calculations”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-06, pp. 115-118.
[n] L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438.
[n] J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308.
[n] M. Johnson, H.-H. Braun, T. J. C. Ekel?Âf, R. J. M. Y, and V. G. Ziemann, “RF-breakdown Experiments at the CTF3 Two-beam Test-stand”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP131, pp. 2800-2802.
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
[n] J. J. Pon, E. Klassen, K. S. Lee, M. M. Mouat, and P. J. Yogendran, “Preliminary Use of PDAs in TRIUMF's Central Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP509, pp. XX-XX.
[n] B. Goddard et al., “Injection Beam Loss and Beam Quality Checks for the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB066, pp. 1671-1673.
[n] O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225.
[n] R. Frankel, “Experiments in Computer Control and Analysis of the AGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1042-1044.
[n] D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 326-329. doi:10.18429/JACoW-NAPAC2016-TUPOA19
[n] C. G. Fong, T. J. Fessenden, R. L. Fulton, and D. Keefe, “Engineering Study of a 10 MeV Heavy Ion Linear Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 962-965.
[n] F. Pedersen and E. C. Raka, “A Measurement of the Longitudial Coupling Impedance in the Brookhaven AGS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3592-3595.
[n] V. Ayvazyan, K. Rehlich, S. N. Simrock, G. Amatuni, and A. Yayloyan, “The Design of the Control System for CANDLE”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO001, pp. 2001-2003.
[n] M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
[n] R. Hettel, R. Ortiz, J. Sebek, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP099L, pp. 1737-1739.
[n] Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
[n] G. Ulm, F. Bellorini, D. P. Brodrick, R. N. Fernandes, N. Levchenko, and D. P. Piso, “PLC Factory: Automating Routine Tasks in Large-Scale PLC Software Development”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 495-500. doi:10.18429/JACoW-ICALEPCS2017-TUPHA046
[n] J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598.
[n] P. A. Lin, C. K. Kuan, T. Y. Lee, H. Y. Lin, and I. C. Sheng, “Brazing and Helium Leaking Test for High Heat Load Components in the Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4004-4006. doi:10.18429/JACoW-IPAC2014-THPRI098
[n] B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
[n] P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412.
[n] R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
[n] J. G. Dorward, “A New Hydrodynamic Liquid Cooling Method for Edge-Cooled, Flat Conductor Magnet Coils and for Liquid-Cooled Ferrite RF Resonator Discs”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 410-414.
[n] G. Danby and J. Jackson, “Vacuum Chamber EDDY Current Correction Coil for the AGS Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1035-1038.
[n] H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1845-1848.
[n] G. Muelhaupt, G. Schmidt, and U. Weinrich, “First Results of Beam Storing in the ESRF Booster Synchrotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP037G, pp. 635-637.
[n] R. S. Livingston, “Survey of Operating Sector-Focused Cyclotrons”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A01, pp. XX-XX.
[n] F. R. Osswald, E. Bouquerel, D. Boutin, W. Beeckman, and J. L. Lancelot, “Optimization of Quadripolar Field Production for Electrostatic Ion Beam Focusing”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2468-2470. doi:10.18429/JACoW-IPAC2014-WEPME080
[n] D. Kassner, “Mechanical Design of ISABELLE Magnet Cryostats”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1260-1263.
[n] M. Kim and M. Kwon, “LabVIEW-EPICS Interfaces in KSTAR Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP519, pp. XX-XX.
[n] W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
[n] P. S. Marroquin, “Integrating Externally Developed Systems for SNS Linac Cooling and Vacuum ”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP063, pp. XX-XX.
[n] D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1130-1133. doi:10.18429/JACoW-IPAC2017-MOPVA119
[n] S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
[n] D. McGinnis and J. Marriner, “Design of 4-8 GHz Stochastic Cooling Equalizers for the Fermilab Accumulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1392-1395.
[n] R. D. Porter et al., “Next Generation Nb3Sn SRF Cavities for Linear Accelerators”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 462-465. doi:10.18429/JACoW-LINAC2018-TUPO055
[n] J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 728-734.
[n] M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
[n] M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
[n] K. Fuchsberger, T. Baer, R. Schmidt, and J. Wenninger, “LHC Orbit Correction Reproducibility and Related Machine Protection”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP010, pp. 3746-3748.
[n] T. Morishita, K. Hasegawa, Y. Kondo, H. Oguri, and M. Otani, “Field Tuning of a Radio-frequency Quadrupole Using Full 3D Modeling”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 798-801. doi:10.18429/JACoW-LINAC2018-THPO049
[n] R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 63-66.
[n] A. G. Kobets et al., “LEPTA Project: Towards Positronium”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB005, pp. 316-318.
[n] R. Rimmer et al., “The JLab Ampere-Class Cryomodule”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP46, pp. 567-570.
[n] S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB003, pp. 843-845.
[n] A. M. Lombardi, “Commissioning of CERN LINAC4”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 658-662. doi:10.18429/JACoW-LINAC2018-TH1P01
[n] H. O. Moser and R. Rossmanith, “Design Study of a Superconductive in-vacuo Undulator for Storage Rings with an Electrical Tunability between K=0 and 2”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B16, pp. 2340-2342.
[n] R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
[n] R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 180-185.
[n] H. Gassot, F. B. Bouly, G. Olry, and S. Rousselot, “Electromechanical Design of 704MHz 0.65 SC Proton Cavity”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO021, pp. 110-113.
[n] E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
[n] W. Chupp et al., “A Quadrupole Beam Transport Experiment for Heavy Ions Under Extreme Space Charge Conditions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2549-2552.
[n] S. Pissanetzky and W. Schmidt, “Design of the Dipole Magnet for the C" Version of the Superconducting Supercollider 20 TeV Twin-Beam Proton Accelerator (SSC)"”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3740-3743.
[n] J. C. Juillard and E. Peschardt, “Phase and Voltage Control in the LEP Radio-Frequency System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1639-1642.
[n] D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170.
[n] U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635.
[n] M.Zobov, “OVERVIEW OF BEAM DYNAMICS STUDIES AT DAFNE”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH01, pp. XX-XX.
[n] T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
[n] D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
[n] G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832.
[n] W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
[n] G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 298-299.
[n] R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 283-286.
[n] H. Saugnac et al., “Preliminary Design of a Stainless Steel Helium Tank and its Associated Cold Tuning System for 700 MHz SCRF Cavities for Proton”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT022, pp. XX-XX.
[n] M. Vadai, A. Alomainy, H. Damerau, S. S. Gilardoni, M. Giovannozzi, and A. Huschauer, “Beam Manipulations With Barrier Buckets in the CERN PS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1132-1135. doi:10.18429/JACoW-IPAC2019-MOPTS107
[n] G. B. Shen, P. Chu, M. R. Kraimer, and J. Wu, “Design of Accelerator Online Simulator Server using Structured Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB024, pp. 2737-2739.
[n] A. Biocca et al., “The Advanced Light Source Accelerator Control System at Ten Years From Commissioning”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP008, pp. XX-XX.
[n] G. B. Shen, M. R. Kraimer, and L. Yang, “Prototype of Beam Commissioning Environment and its Applications for NSLS-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB026, pp. 2740-2742.
[n] A. Abola et al., “Experience in Using Workstations as Hosts in an Accelerator Control Environment”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 594-597.
[n] D. Dale et al., “Custom Electronic Modules for the TRIUMF/ISAC Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_053.
[n] R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669.
[n] B. Goddard et al., “Transient Beam Losses in the LHC Injection Kickers from Micron Scale Dust Particles”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR092, pp. 2044-2046.
[n] R. Chasman, K. Batchelor, and N. Fewell, “Calculations and Measurements on Reduction of the Energy Spread and the Variation in Mean Energy of the 200-MeV Linac Beam at Brookhaven”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper B05, pp. 41-46.
[n] K. Hasegawa, “Operation Experiences of the J-PARC Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 774-777. doi:10.18429/JACoW-LINAC2018-THPO040
[n] D. Gough, D. Brodzik, A. Faltens, C. Pike, and J. Stoker, “Pulsers for the Induction Linac Experiment, MBE-4”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 954-957.
[n] J. G. Hwang et al., “Capacitive Linear-Cut Beam Position Monitor Design for Ion Synchrotron at KHIMA Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 998-1000. doi:10.18429/JACoW-IPAC2015-MOPTY030
For LaTeX
Use Complete Form
For BibTeX
References
- N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268.
- J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239.
- G. P. A. Berg et al., “Modes of Operation for the Cooler Ring COSY”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper O04, pp. 601-604.
- F. Belloni et al., “Space Charge Effects Studies for the ESS Cold Linac Beam Profiler”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 371-374.
- L. Arnaudon et al., “Recent Achievements in Transverse Spin-Polarisation at LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 187-190.
- A. Luccio, D. J. Clark, D. Elo, P. Frazier, D. Morris, and M. Renkas, “A Polarized Ion Source for the Berkeley 88 - Inch Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 140-145.
- A. G. Kobets et al., “Lepta - the Facility for Fundamental and Applied Research”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper FRXAUD02, pp. 179-181.
- R. S. Livingston, “Session IV Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
- A. A. Sidorin et al., “A Method for Measuring the Positron Lifetime in Solid Matter with a Continuous Positron Beam”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 267-269.
- J. A. Benjamin et al., “Terminal Ion Source System for the Brookhaven Three-Stage Tandem Facility”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 118-123.
- H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR39, pp. 3587-3590.
- J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460.
- V. N. Barkovsky, Ju. G. Basargin, R. N. Litunovsky, O. A. Minjaev, A. V. Popov, and A. V. Stepanov, “Ion Optical Studies of Extraction Transport and Analysis Systems for 240-cm Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-005, pp. XX-XX.
- G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2240-2243.
- H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179.
- A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX.
- G. M. Gammel, E. F. Meier, and R. M. Mobley, “Ion Source and Transport System for BNL-HIF Pre-Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-10, pp. 453-456.
- B. Podobedov, B. Kushner, S. Ramamoorthy, Y. Tang, and E. Zitvogel, “Fast Digital Orbit Feedback Systems at NSLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPA005, pp. 396-398.
- A. Ijspeert, A. Puntambekar, and J. Salminen, “Superconducting Sextupole Corrector Magnet for the LHC Main Dipoles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP024G, pp. 2252-2254.
- K. Crandall, “Error Studies Using PARTRACE, a New Program that Combines PARMILA and TRACE 3-D”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-13, pp. 335-337.
- C. Limborg and J. Sebek, “Measurement of High Q RF Cavity Impedance with Beam”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP37C, pp. 972-974.
- A. Ando, “New Subaru and Other Light Source Projects in Japan”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6A004, pp. 645-652.
- M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 703-707.
- A. Stillman, “The Slow Control System of the Muon g-2 Experiment”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA09, pp. 2211-2213.
- V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
- X. D. Yang and Y. J. Yuan, “Commissioning of Electron Cooling in CSRe”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper FRM1MCIO02, pp. 173-177.
- R. Stassen, B. Breitkreutz, G. Schug, and H. Stockhorst, “Stochastic Cooling of Heavy Ions in the HESR”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD02, pp. 15-19.
- W. Reass, V. P. Derenchuk, D. Rees, T. Rinckel, and G. Visser, “The Klystron RF Systems for the Indiana University LENS Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS027, pp. 2394-2396.
- C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
- L. Solomon, D. Lynch, J. Safranek, and O. Singh, “Chamber Motion Measurements at the NSLS X-RAY Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA167, pp. 2244-2246.
- D. L. Judd and R. S. Livingston, “Closing Remarks”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper Z-001, pp. XX-XX.
- G. S. Zanyan, B. Grigoryan, K. Manukyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Booster Design for CANDLE Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC137, pp. 3209-3211.
- P. F. Dahl, S. Giordano, J. P. Hannwacker, K. Jellett, G. Parzen, and D. E. Young, “Linac Cavity Field Calculations”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-06, pp. 115-118.
- L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438.
- J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308.
- M. Johnson, H.-H. Braun, T. J. C. Ekel?Âf, R. J. M. Y, and V. G. Ziemann, “RF-breakdown Experiments at the CTF3 Two-beam Test-stand”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP131, pp. 2800-2802.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
- J. J. Pon, E. Klassen, K. S. Lee, M. M. Mouat, and P. J. Yogendran, “Preliminary Use of PDAs in TRIUMF's Central Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP509, pp. XX-XX.
- B. Goddard et al., “Injection Beam Loss and Beam Quality Checks for the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB066, pp. 1671-1673.
- O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225.
- R. Frankel, “Experiments in Computer Control and Analysis of the AGS”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1042-1044.
- D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 326-329.
- C. G. Fong, T. J. Fessenden, R. L. Fulton, and D. Keefe, “Engineering Study of a 10 MeV Heavy Ion Linear Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 962-965.
- F. Pedersen and E. C. Raka, “A Measurement of the Longitudial Coupling Impedance in the Brookhaven AGS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3592-3595.
- V. Ayvazyan, K. Rehlich, S. N. Simrock, G. Amatuni, and A. Yayloyan, “The Design of the Control System for CANDLE”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO001, pp. 2001-2003.
- M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
- R. Hettel, R. Ortiz, J. Sebek, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP099L, pp. 1737-1739.
- Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
- G. Ulm, F. Bellorini, D. P. Brodrick, R. N. Fernandes, N. Levchenko, and D. P. Piso, “PLC Factory: Automating Routine Tasks in Large-Scale PLC Software Development”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 495-500.
- J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 595-598.
- P. A. Lin, C. K. Kuan, T. Y. Lee, H. Y. Lin, and I. C. Sheng, “Brazing and Helium Leaking Test for High Heat Load Components in the Taiwan Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4004-4006.
- B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
- P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 408-412.
- R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
- J. G. Dorward, “A New Hydrodynamic Liquid Cooling Method for Edge-Cooled, Flat Conductor Magnet Coils and for Liquid-Cooled Ferrite RF Resonator Discs”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 410-414.
- G. Danby and J. Jackson, “Vacuum Chamber EDDY Current Correction Coil for the AGS Booster”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1035-1038.
- H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1845-1848.
- G. Muelhaupt, G. Schmidt, and U. Weinrich, “First Results of Beam Storing in the ESRF Booster Synchrotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP037G, pp. 635-637.
- R. S. Livingston, “Survey of Operating Sector-Focused Cyclotrons”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63A01, pp. XX-XX.
- F. R. Osswald, E. Bouquerel, D. Boutin, W. Beeckman, and J. L. Lancelot, “Optimization of Quadripolar Field Production for Electrostatic Ion Beam Focusing”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2468-2470.
- D. Kassner, “Mechanical Design of ISABELLE Magnet Cryostats”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1260-1263.
- M. Kim and M. Kwon, “LabVIEW-EPICS Interfaces in KSTAR Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP519, pp. XX-XX.
- W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
- P. S. Marroquin, “Integrating Externally Developed Systems for SNS Linac Cooling and Vacuum ”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP063, pp. XX-XX.
- D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1130-1133.
- S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
- D. McGinnis and J. Marriner, “Design of 4-8 GHz Stochastic Cooling Equalizers for the Fermilab Accumulator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1392-1395.
- R. D. Porter et al., “Next Generation Nb3Sn SRF Cavities for Linear Accelerators”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 462-465.
- J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 728-734.
- M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
- M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
- K. Fuchsberger, T. Baer, R. Schmidt, and J. Wenninger, “LHC Orbit Correction Reproducibility and Related Machine Protection”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP010, pp. 3746-3748.
- T. Morishita, K. Hasegawa, Y. Kondo, H. Oguri, and M. Otani, “Field Tuning of a Radio-frequency Quadrupole Using Full 3D Modeling”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 798-801.
- R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 63-66.
- A. G. Kobets et al., “LEPTA Project: Towards Positronium”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB005, pp. 316-318.
- R. Rimmer et al., “The JLab Ampere-Class Cryomodule”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP46, pp. 567-570.
- S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB003, pp. 843-845.
- A. M. Lombardi, “Commissioning of CERN LINAC4”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 658-662.
- H. O. Moser and R. Rossmanith, “Design Study of a Superconductive in-vacuo Undulator for Storage Rings with an Electrical Tunability between K=0 and 2”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B16, pp. 2340-2342.
- R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
- R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 180-185.
- H. Gassot, F. B. Bouly, G. Olry, and S. Rousselot, “Electromechanical Design of 704MHz 0.65 SC Proton Cavity”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO021, pp. 110-113.
- E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
- W. Chupp et al., “A Quadrupole Beam Transport Experiment for Heavy Ions Under Extreme Space Charge Conditions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2549-2552.
- S. Pissanetzky and W. Schmidt, “Design of the Dipole Magnet for the C" Version of the Superconducting Supercollider 20 TeV Twin-Beam Proton Accelerator (SSC)"”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3740-3743.
- J. C. Juillard and E. Peschardt, “Phase and Voltage Control in the LEP Radio-Frequency System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1639-1642.
- D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170.
- U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635.
- M.Zobov, “OVERVIEW OF BEAM DYNAMICS STUDIES AT DAFNE”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH01, pp. XX-XX.
- T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
- D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
- G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832.
- W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
- G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 298-299.
- R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 283-286.
- H. Saugnac et al., “Preliminary Design of a Stainless Steel Helium Tank and its Associated Cold Tuning System for 700 MHz SCRF Cavities for Proton”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT022, pp. XX-XX.
- M. Vadai, A. Alomainy, H. Damerau, S. S. Gilardoni, M. Giovannozzi, and A. Huschauer, “Beam Manipulations With Barrier Buckets in the CERN PS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1132-1135.
- G. B. Shen, P. Chu, M. R. Kraimer, and J. Wu, “Design of Accelerator Online Simulator Server using Structured Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB024, pp. 2737-2739.
- A. Biocca et al., “The Advanced Light Source Accelerator Control System at Ten Years From Commissioning”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP008, pp. XX-XX.
- G. B. Shen, M. R. Kraimer, and L. Yang, “Prototype of Beam Commissioning Environment and its Applications for NSLS-II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB026, pp. 2740-2742.
- A. Abola et al., “Experience in Using Workstations as Hosts in an Accelerator Control Environment”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 594-597.
- D. Dale et al., “Custom Electronic Modules for the TRIUMF/ISAC Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_053.
- R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1666-1669.
- B. Goddard et al., “Transient Beam Losses in the LHC Injection Kickers from Micron Scale Dust Particles”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR092, pp. 2044-2046.
- R. Chasman, K. Batchelor, and N. Fewell, “Calculations and Measurements on Reduction of the Energy Spread and the Variation in Mean Energy of the 200-MeV Linac Beam at Brookhaven”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper B05, pp. 41-46.
- K. Hasegawa, “Operation Experiences of the J-PARC Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 774-777.
- D. Gough, D. Brodzik, A. Faltens, C. Pike, and J. Stoker, “Pulsers for the Induction Linac Experiment, MBE-4”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 954-957.
- J. G. Hwang et al., “Capacitive Linear-Cut Beam Position Monitor Design for Ion Synchrotron at KHIMA Project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 998-1000.
Back to search