Favourites
For Word
[n] C. E. Mayes and G. H. Hoffstaetter, “Coherent Synchrotron Radiation Simulations for the Cornell Energy Recovery Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE097, pp. 2353-2355.
[n] N. Ouchi et al., “Cold Test of 600 MHz Superconducting Cryomodule for High Intensity Proton Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU474, pp. 488-490.
[n] Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864.
[n] R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
[n] H. Podlech, C. Commenda, H. Klein, H. Liebermann, U. Ratzinger, and A. C. Sauer, “First Cryogenic Tests of the Superconducting CH-structure”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS042, pp. 1588-1590.
[n] V. Volkov et al., “Bench Test Results of CW 100 mA Electron RF Gun for Novosibirsk ERL based FEL”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 65-69. doi:10.18429/JACoW-ERL2019-WECOXBS03
[n] F.-J. Decker et al., “Multiple FELs from the One LCLS Undulator”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB31, pp. 629-632.
[n] M. Hayes, “Tolerances of the Spool Piece Correction System for the LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE045, pp. 1255-1257.
[n] Z. Wang, C. Feng, D. Huang, K. Q. Zhang, and M. Zhang, “Corrugated Structure as a Linearizer in High Repetition Rate X-Ray Free Electron Laser Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4485-4488. doi:10.18429/JACoW-IPAC2018-THPMK078
[n] S. Cohen, M. W. Sherman, and W. D. Sherman, “Modbus/TCP Controller for the Power Supplies in ALS BTS Beam Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN111, pp. 425-427.
[n] D. B. Belohrad, L. K. Jensen, O. R. Jones, M. Ludwig, and J.-J. Savioz, “The LHC Fast BCT System: A Comparison of Design Parameters with Initial Performance”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM051, pp. 269-273.
[n] A. Navitski, E. Elsen, B. Foster, A. L. Prudnikava, and Y. Tamashevich, “Surface Analyses and Optimization of Centrifugal Barrel Polishing of Nb Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB073, pp. 286-290.
[n] M. Sapinski et al., “Measurements of the GSI Transfer Beam Lines Ion Optics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 131-134. doi:10.18429/JACoW-IPAC2019-MOPGW024
[n] W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
[n] O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 192-194. doi:10.18429/JACoW-CYCLOTRONS2019-TUP017
[n] M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
[n] M. Ries, J. Feikes, T. Goetsch, and G. Wuestefeld, “Survey of Beam Optics Solutions for the MLS Lattice”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO005, pp. 1883-1885.
For LaTeX
Use Complete Form
For BibTeX
References
- C. E. Mayes and G. H. Hoffstaetter, “Coherent Synchrotron Radiation Simulations for the Cornell Energy Recovery Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE097, pp. 2353-2355.
- N. Ouchi et al., “Cold Test of 600 MHz Superconducting Cryomodule for High Intensity Proton Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU474, pp. 488-490.
- Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864.
- R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
- H. Podlech, C. Commenda, H. Klein, H. Liebermann, U. Ratzinger, and A. C. Sauer, “First Cryogenic Tests of the Superconducting CH-structure”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS042, pp. 1588-1590.
- V. Volkov et al., “Bench Test Results of CW 100 mA Electron RF Gun for Novosibirsk ERL based FEL”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 65-69.
- F.-J. Decker et al., “Multiple FELs from the One LCLS Undulator”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB31, pp. 629-632.
- M. Hayes, “Tolerances of the Spool Piece Correction System for the LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE045, pp. 1255-1257.
- Z. Wang, C. Feng, D. Huang, K. Q. Zhang, and M. Zhang, “Corrugated Structure as a Linearizer in High Repetition Rate X-Ray Free Electron Laser Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4485-4488.
- S. Cohen, M. W. Sherman, and W. D. Sherman, “Modbus/TCP Controller for the Power Supplies in ALS BTS Beam Line”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN111, pp. 425-427.
- D. B. Belohrad, L. K. Jensen, O. R. Jones, M. Ludwig, and J.-J. Savioz, “The LHC Fast BCT System: A Comparison of Design Parameters with Initial Performance”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM051, pp. 269-273.
- A. Navitski, E. Elsen, B. Foster, A. L. Prudnikava, and Y. Tamashevich, “Surface Analyses and Optimization of Centrifugal Barrel Polishing of Nb Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB073, pp. 286-290.
- M. Sapinski et al., “Measurements of the GSI Transfer Beam Lines Ion Optics”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 131-134.
- W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
- O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 192-194.
- M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
- M. Ries, J. Feikes, T. Goetsch, and G. Wuestefeld, “Survey of Beam Optics Solutions for the MLS Lattice”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO005, pp. 1883-1885.
Back to search
