Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1705-1708. doi:10.18429/JACoW-IPAC2019-TUPRB013
[n] S. A. Averichev et al., “Progress in Manufactoring Main Nuclotron Extraction Elements”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP075G, pp. 2435-2437.
[n] N. Gandolfo et al., “Prototype SSR2 Tuner Procurement and Testing at IJCLab for PIP-II Project”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 917-920. doi:10.18429/JACoW-SRF2023-WEPWB137
[n] J. G. M. Kleeven et al., “AOC, A Beam Dynamics Design Code for Medical and Industrial Accelerators at IBA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1902-1904. doi:10.18429/JACoW-IPAC2016-TUPOY002
[n] G. Boicourt and J. Merson, “Calculations on Permanent-Magnet Quadrupoles with Nonrectangular Cross Section”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-33, pp. 391-393.
[n] C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_046.
[n] J. P. Chiou et al., “The Orbit Study on the SRRC 1.3 GeV Booster Synchrotron during Ramping”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP113G, pp. 884-886.
[n] A. Chan et al., “Database Applications to Integrate Beamline Optics Changes into Engineering Databases”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS057, pp. 563-565.
[n] W. Lavender et al., “The SSRL Injector Beam Position Monitoring Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1151-1154.
[n] H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
[n] F. Micolon et al., “FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4393-4395. doi:10.18429/JACoW-IPAC2023-THPA184
[n] V. L. Auslender et al., “High-Frequency Powerful Electron Accelerators Type ILU for Industrial Applications”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 182-185.
[n] J. C. Frisch et al., “Study of Non-Linear Photoemission Effects in III-V Semiconductors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3036-3039.
[n] S. Aumon et al., “Transverse Mode Coupling Instability Measurements at Transition Crossing in the CERN PS”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO1D02, pp. 681-685.
[n] H. Wiedemann, S. Rimjaem, T. Vilaithong, N. Chirapatpimol, and C. Settakorn, “RF-GUN OPTIMIZATION FOR FEMTO-SECOND ELECTRON BUNCHES”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUBU05, pp. XX-XX.
[n] V. Sajaev et al., “First injection and lattice commissioning of APS upgrade storage ring”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG08, unpublished.
[n] H. S. Vora et al., “Master Slave Topology Based, Remotely Operated, Precision X-ray Beam Profiler and Placement System for High Pressure Physics Experiment at Indus-2 Beam Line”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCD04, pp. 128-130.
[n] F. Becker, F. M. Bieniosek, P. Forck, D. H. H. Hoffmann, and P. N. Ni, “Beam Induced Fluorescence (BIF) Monitor for Intense Heavy Ion Beams”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF054, pp. 236-240.
[n] C.-M. Cheng et al., “The Issue with XBPM2 in the TPS Front End”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM073, unpublished.
[n] A. Blednykh et al., “Temperature Measurements of the NSLS-II Vacuum Components”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 443-445. doi:10.18429/JACoW-NAPAC2019-TUPLM36
[n] M. J. Barnes and G. D. Wait, “Low Power Measurements on an AGS Injection Kicker Magnet”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN069, pp. 2188-2190.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1705-1708.
- S. A. Averichev et al., “Progress in Manufactoring Main Nuclotron Extraction Elements”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP075G, pp. 2435-2437.
- N. Gandolfo et al., “Prototype SSR2 Tuner Procurement and Testing at IJCLab for PIP-II Project”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB137, pp. 917-920.
- J. G. M. Kleeven et al., “AOC, A Beam Dynamics Design Code for Medical and Industrial Accelerators at IBA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1902-1904.
- G. Boicourt and J. Merson, “Calculations on Permanent-Magnet Quadrupoles with Nonrectangular Cross Section”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-33, pp. 391-393.
- C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_046.
- J. P. Chiou et al., “The Orbit Study on the SRRC 1.3 GeV Booster Synchrotron during Ramping”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP113G, pp. 884-886.
- A. Chan et al., “Database Applications to Integrate Beamline Optics Changes into Engineering Databases”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS057, pp. 563-565.
- W. Lavender et al., “The SSRL Injector Beam Position Monitoring Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1151-1154.
- H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
- F. Micolon et al., “FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA184, pp. 4393-4395.
- V. L. Auslender et al., “High-Frequency Powerful Electron Accelerators Type ILU for Industrial Applications”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 182-185.
- J. C. Frisch et al., “Study of Non-Linear Photoemission Effects in III-V Semiconductors”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3036-3039.
- S. Aumon et al., “Transverse Mode Coupling Instability Measurements at Transition Crossing in the CERN PS”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO1D02, pp. 681-685.
- H. Wiedemann, S. Rimjaem, T. Vilaithong, N. Chirapatpimol, and C. Settakorn, “RF-GUN OPTIMIZATION FOR FEMTO-SECOND ELECTRON BUNCHES”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUBU05, pp. XX-XX.
- V. Sajaev et al., “First injection and lattice commissioning of APS upgrade storage ring”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG08, unpublished.
- H. S. Vora et al., “Master Slave Topology Based, Remotely Operated, Precision X-ray Beam Profiler and Placement System for High Pressure Physics Experiment at Indus-2 Beam Line”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCD04, pp. 128-130.
- F. Becker, F. M. Bieniosek, P. Forck, D. H. H. Hoffmann, and P. N. Ni, “Beam Induced Fluorescence (BIF) Monitor for Intense Heavy Ion Beams”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF054, pp. 236-240.
- C.-M. Cheng et al., “The Issue with XBPM2 in the TPS Front End”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM073, this conference.
- A. Blednykh et al., “Temperature Measurements of the NSLS-II Vacuum Components”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 443-445.
- M. J. Barnes and G. D. Wait, “Low Power Measurements on an AGS Injection Kicker Magnet”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN069, pp. 2188-2190.
Back to search