JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Kurup and A. P. Letchford, “Electromagnetic Design of a Radio Frequency Quadrupole for the Front End Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH116, pp. 315-317. 
[n]	M. Lee and S. Kleban, “SLC Beam Line Error Analysis Using a Model-Based Expert System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 767-770. 
[n]	G. Tranquille, “Electron Cooling Experiments at LEIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP057, pp. 3497-3499. 
[n]	S. U. De Silva and J. R. Delayen, “Multipacting Analysis of the Superconducting Parallel-bar Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP098, pp. 1018-1020. 
[n]	J. N. Corlett et al., “The Next Linear Collider Damping Ring Complex”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA20, pp. 3429-3431. 
[n]	J. R. Leibfritz, “FNAL Main Injector $gamma_t$-Jump System Beamtube Design”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P008, pp. 3601-3603. 
[n]	U. Krause and V. RW Schaa, “Re-Engineering of the GSI Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAT002, pp. XX-XX. 
[n]	N. Thompson, “Possible Method for the Control of SASE Fluctuations”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 129-131. doi:10.18429/JACoW-FEL2017-MOP039
[n]	H. S. Kim et al., “Beam Phase Measurement for PEFP Linear Accelerator”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB022, pp. 894-896. 
[n]	E. Gschwendtner et al., “Design and Performance of the CNGS Secondary Beam Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN095, pp. 1601-1603. 
[n]	Y. W. An, Y. D. Liu, Y. Liu, S. Wang, and S. Y. Xu, “Preparation for the CSNS-RCS Commissioning”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2317-2319. doi:10.18429/JACoW-IPAC2017-TUPVA099
[n]	S. Ratschow, T. Weiland, and M. Timm, “On the Mechanism of Surface Roughness Wake Field Excitation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA010, pp. 167-169. 
[n]	N. Thompson, “The Effect of Vaccum Vessel Permeability on the Field Quality within Dipole and Quadrupole Magnets at the Energy Recovery Linac Prototype (ERLP) at Daresbury Laboratory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS065, pp. 2529-2531. 
[n]	Y. Tanimoto, “Direct Observation of the Dust-trapping Phenomenon”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUIC02, pp. 315-323. 
[n]	D. T. Palmer, M. J. Hogan, M. Ferrario, and L. Serafini, “A 90 GHz Photoinjector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA50, pp. 1997-1999. 
[n]	C. Lyneis, Y. Kojima, J. P. Turnesure, and N. T. Viet, “Electron Loading in L- and S- Band Superconducting Niobium Cavities”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 101-104. 
[n]	R. G. Olave, S. U. De Silva, J. R. Delayen, and Z. Li, “Study of Cavity Imperfection Impact on RF-Parameters and Multipole Components in a Superconducting RF-Dipole Cavity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC43, pp. 871-873. 
[n]	F. Marti, H. Blosser, D. Johnson, D. Lawton, and J. Vincent, “A Separated Sector Cyclotron for the Production of High Intensity Protons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W027, pp. 1057-1059. 
[n]	N. Baboi and B. Lorbeer, “Analysis of the Bunch Position Monitoring in Long Bunch Trains at FLASH”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEPP11, unpublished. 
[n]	S. Gammino et al., “The ECLISSE Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI007, pp. 1709-1711. 
[n]	M. J. Barnes, L. Ducimeti?¿re, B. Goddard, and J. A. Uythoven, “Upgrading the Fast Extraction Kicker System in SPS LSS6”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD003, pp. 1437-1439. 
[n]	K. Yokoya, “Beam Phenomena at the Interaction Point”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH1-04, pp. 494-499. 
[n]	J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2661-2664. doi:10.18429/JACoW-IPAC2019-WEPGW079
[n]	B. Koubek, A. Schempp, J. S. Schmidt, and J. Haeuser, “RF Setup of the MedAustron RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB046, pp. 957-959. 
[n]	N. R. A. Valles et al., “Cryomodule Performance of the Main Linac Prototype Cavity for Cornell's Energy Recovery Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA07, pp. 1367-1369. 
[n]	A. De et al., “An Embedded System Based Computer Controlled Process Automation for Recovery and Purification of 99mTc from (n, )99Mo”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD36, pp. 211-213. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search