Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Schenk et al., “RF Quadrupole Structures for Transverse Landau Damping in Circular Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2516-2519. doi:10.18429/JACoW-IPAC2017-WEOAB3
[n] J. Wan et al., “Prototype Design of Wire Scanner for SHINE”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 285-287. doi:10.18429/JACoW-IBIC2020-THPP36
[n] C. Joshi et al., “Test of the Electron Hose Instability in the E157 Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH141, pp. 4002-4004.
[n] D. Walz et al., “Tests and Description of Beam Containment Devices and Instrumentation-A New Dimension in Safety Problems”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 465-472.
[n] M. Kilpatrick et al., “Interactive automated Bragg peak identification with 3D neutron scattering data”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5138-5141. doi:10.18429/JACoW-IPAC2023-THPM117
[n] N. M. Cook et al., “Integrating Online Analysis with Experiments to Improve X-Ray Light Source Operations”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 921-924. doi:10.18429/JACoW-ICALEPCS2023-TUSDSC02
[n] L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
[n] A. Andersson, J. Breunlin, M. Brosi, and R. Svärd, “Recent progress at the UV to visible light-based diagnostic beam lines at MAX IV”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL135, unpublished.
[n] H. Ghasem, E. Ahmadi, and F. Saeidi, “Closed Orbit Correction in the High Field Lattice of ILSF Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA025, pp. 127-129.
[n] V. Michel et al., “BLISS - Experiments Control for ESRF Beamline”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 26-29. doi:10.18429/JACoW-PCaPAC2018-WEP02
[n] T. Mimashi et al., “The Design of Beam Abort System for the Super KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA023, pp. 1378-1380.
[n] F. Consoli, A. C. Caruso, G. Gallo, D. Rifuggiato, E. Zappal?á, and M. Di Giacomo, “RF Design of the Power Coupler for the Spiral2 Single Bunch Selector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP277, pp. 1346-1348.
[n] B. W??rkner et al., “Measuring Beamsize with the LHC Beam Gas Vertex Detector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2680-2683. doi:10.18429/JACoW-IPAC2019-WEPGW084
[n] G. Geloni, P. Ilinski, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Integration of the Optical Replica Ultrashort Electron Bunch Diagnostics with the High-Resolution Coherent Optical Transition Radiation Imager”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC46, pp. 603-606.
[n] A. Gerbershagen et al., “Establishment of the new particle therapy Research Center (PARTREC) at UMCG Groningen”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM080, unpublished.
[n] R. G. Eichhorn, N. A. Stilin, and W. Weingarten, “N-Doped Niobium Accelerating Cavities: Analyzing Model Applicability”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1014-1016. doi:10.18429/JACoW-LINAC2016-THPLR074
[n] Yu. A. Rogovsky et al., “Beam Measurements with Visible Synchrotron Light at VEPP-2000 Collider”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD40, pp. 140-142.
[n] T. Katayama, T. Kikuchi, F. Nolden, G. Schreiber, M. Steck, and H. Stockhorst, “Simulation Study of Barrier Bucket Accumulation with Stochastic Cooling at the GSI ESR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS19, pp. 136-139.
[n] A. Gerhard et al., “RF Sparking in Accelerator Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1108-1111.
[n] E. Gorniker et al., “RF System of VEPP-4M Electron-Positron Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP11, pp. 1681-1683.
[n] K. Bongardt, M. Pabst, and A. Letchford, “Halo Formation by Mismatch for High Intensity Bunched Beams”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4025, pp. 824-826.
[n] E. Kako et al., “Initial Tests of L-band Niobium Superconducting Cavities for Linear Collider Application”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F18, pp. XX-XX.
[n] J. Brodowski, “Design of a Versatile ESQ Transport System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3666-3669.
[n] A. Ueno, “Measurement of Precise Particle Distributions in Emittance Phase Plane in the JHP LEBT”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP10, pp. 343-345.
[n] J. Marriner, G. Jackson, D. McGinnis, R. Pasquinelli, D. Peterson, and J. Petter, “Bunched Beam Cooling in the FNAL Antiproton Accumulator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1577-1580.
[n] W. X. Cheng, B. Bacha, B. N. Kosciuk, and D. Padrazo Jr, “Improvements of NSLS-II X-ray Diagnostic Beamlines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1837-1840. doi:10.18429/JACoW-IPAC2018-WEPAF012
[n] N. Li et al., “Performance of the PEP-II Low-Energy Ring Quadrupoles”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P040, pp. 3318-3320.
[n] T.-J. Kuo et al., “Design of prototype magnets for FETS-FFA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB086, unpublished.
[n] G. Heidenreich and Th. Stammbach, “Some Aspects of the 100 uA Operation of the SIN Injector Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EC-04, pp. 365-370.
[n] H. J. Son et al., “Status of the High-Current EBIS Charge Breeder for the Facility for Rare Isotope Beams”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 172-176. doi:10.18429/JACoW-ECRIS2020-NACB02
[n] S. A. Gavrilov et al., “Beam Diagnostics and Instrumentation Upgrade for Multipurpose Research Complex of INR RAS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 667-669. doi:10.18429/JACoW-RUPAC2016-THPSC058
[n] D. E. Young, V. Dudnikov, M. Popovic, C. W. Schmidt, and D. Sun, “Low Energy Improvements to the Fermilab 400-MeV Linear Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH102, pp. 3915-3917.
[n] M. A. Hevinga, S. Brandenburg, T. W. Nijboer, and J. Vorenholt, “Beamloss Monitoring and Control for High Intensity Beams at the AGOR-Facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP087, pp. 227-229.
[n] R. Carcagno et al., “First Fermilab Results of SRF Cavity Lorentz Force Detuning Compensation Using a Piezo Tuner”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP57, pp. XX-XX.
[n] S. Seletsky, V. Tupikov, S. Nagaitsev, and A. Shemyakin, “Field Measurements in the Cooling Section Solenoid for the Recycler Cooler”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO012, pp. 2373-2375.
[n] M. Washio et al., “Compact Picosecond Pulse Radiolysis System Using Photo-cathode RF Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH188, pp. 2373-2375.
[n] R. G. Schonberg et al., “Portable X-Band Linear Accelerator Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3234-3237.
[n] R. Hettel et al., “Digital Orbit Feedback Control for SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ22, pp. 2717-2719.
[n] Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3901-3903. doi:10.18429/JACoW-IPAC2024-THPS66
[n] S. Calatroni, V. Palmieri, M. Pasini, D. Ramos, T. Tardy, and T. Trilhe, “The HIE-ISOLDE Superconducting Cavities: Mechanical Design and Fabrication”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO010, pp. 546-549.
[n] I. A. Koop, A. P. Lysenko, I. N. Nesterenko, Yu. M. Shatunov, and A. A. Valishev, “Dynamic Aperture of the Storage Ring VEPP-2M in Round Beam Mode”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V007, pp. 1433-1435.
[n] V. Bharadwaj et al., “Computer Controls Programming for Deceleration Beam in the Fermilab Antiproton Accumulator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 964-967.
[n] Q. Luo and D. R. Xu, “Progress on Preliminary Conceptual Study of HIEPA, a Super Tau-Charm Factory in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 422-424. doi:10.18429/JACoW-IPAC2018-MOPML013
[n] P. A. McIntosh et al., “Realisation of a prototype superconducting CW cavity and cryomodule for energy recovery”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP33, pp. XX-XX.
[n] E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
[n] I. Wilson, “Alignment Studies for the CERN Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper WE2-01, pp. 557-561.
[n] K. Nakayoshi, Y. Fujii, T. Nakadaira, and K. Sakashita, “Development of an Expert System for the High Intensity Neutrino Beam Facility at J-PARC”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 154-158. doi:10.18429/JACoW-IBIC2018-MOPC18
[n] V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
[n] M. M. Karliner, V. Kiselev, A. S. Medvedko, V. V. Smaluk, A. M. Zelenin, and N. I. Zinevich, “The Feedback System for Elemination the Fast Head-tail Instability at Storage Ring VEPP-4M”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP010G, pp. 1009-1011.
[n] B. Podobedov, B. Kushner, S. Ramamoorthy, Y. Tang, and E. Zitvogel, “Fast Digital Orbit Feedback Systems at NSLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA005, pp. 396-398.
[n] B. Smit, F. Frei, R. Ischebeck, G. L. Orlandi, and V. Schlott, “Bunch Length Measurements Using Correlation Theory in Incoherent Optical Transition Radiation”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC40, pp. 471-473.
[n] J. A. Nolen and P. S. Miller, “Improved Energy Resolution with the MSU Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-08, pp. 249-253.
[n] A. Nordt et al., “Verification and Validation of the ESS Machine Protection System-of-Systems (MP-SoS)”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 296-302. doi:10.18429/JACoW-ICALEPCS2023-TU2BCO06
[n] H. Huang et al., “AGS Polarized Proton Operation in Run 2009”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1GRC04, pp. 4251-4253.
[n] E. McCrory, G. Lee, and R. Webber, “Observation of Transverse Instabilities in the FNAL 200 MeV Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-54, pp. 182-184.
[n] K. Hasegawa, Y. Honda, H. Ino, M. Mizumoto, and N. Ouchi, “Beam Dynamics Design of a Proton Linac for the Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05G, pp. 719-721.
[n] L. Catani et al., “Cathodic Arc Grown Niobium Films for RF Superconducting Cavity Applications”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP62, pp. 385-387.
[n] C. Lu et al., “Time-Resolved Measurement of Quadrupole Wakefields in Corrugated Structures”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 840-843. doi:10.18429/JACoW-IBIC2016-WEPG79
[n] M. Tzoufras et al., “The Physical Picture of Beam Loading in the Blowout Regime”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS028, pp. 3061-3063.
[n] S. Wijethunga, R. Thurman-Keup, and V. Scarpine, “Geant4 simulations on Faraday cup design for PIP-II Laser wire scanner system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2295-2298. doi:10.18429/JACoW-IPAC2024-WEPG38
[n] S. W. Jang and E.-S. Kim, “Simultaneous Two Beam Acceleration Lattice Design Study for the Post Linear Accelerator of RISP”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3294-3296. doi:10.18429/JACoW-IPAC2016-THPMB029
[n] Y. Tan et al., “Third order resonance correction using new Trim-S system in J-PARC MR”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB042, unpublished.
[n] A. Sukhanov, W. Fu, J. P. Jamilkowski, and R. H. Olsen, “Fast Interactive Python-based Analysis of Streamed Images”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 825. doi:10.18429/JACoW-ICALEPCS2019-TUCPR06
[n] P. J. S. Barratt et al., “High Stability Operation of the ISIS Pulsed Spallation Neutron Source at 200 micro-A”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP094G, pp. 584-586.
[n] S. Holmes et al., “Low-Level RF Signal Processing for the Next Linear Collider Test Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P026, pp. 3027-3029.
[n] F. Gougnaud et al., “Slow Control for Micromegas and Drift Chambers”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP013, pp. XX-XX.
[n] D. K. Johnson et al., “Positron Source from Betatron X-Rays Emitted in a Plasma Wiggler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE019, pp. 1625-1627.
[n] K. Nakayoshi, Y. Fujii, and K. Sakashita, “Improvements in the T2K Primary Beamline Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA10, pp. 940-943.
[n] ?ü. Freitas, V. Hardion, M. Lindberg, R. Lindvall, R. Sv?ñrd, and C. Takahashi, “Control System Suite for Beam Position Monitors at MAX IV”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 496-499. doi:10.18429/JACoW-IBIC2022-WEP38
[n] Y. Suetsugu, H. Hisamatsu, K.-I. Kanazawa, K. Shibata, M. Shimamoto, and M. Shirai, “Ramp;D on Copper Beam Ducts with Antechambers and Related Vacuum Components”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH179, pp. 1438-1440.
[n] Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
[n] A. Faingersh et al., “New Resonator for the Israeli FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH018, pp. 349-351.
[n] R. H. Miller, H. Deruyter, W. R. Fowkes, J. M. Potter, R. G. Schonberg, and J. N. Weaver, “RF Phase Focusing in Portable X-Band Linear Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3231-3234.
[n] P. Boonpornprasert, G. Z. Georgiev, M. Krasilnikov, X.-K. Li, and A. Lueangaramwong, “Simulation Study of a Bunch Compressor for an Accelerator-Based THz Source at the European XFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2454-2456. doi:10.18429/JACoW-IPAC2022-THPOST009
[n] C. Sch?Âmers et al., “Reacceleration of Ion Beams for Particle Therapy”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2091-2093. doi:10.18429/JACoW-IPAC2014-WEPRO062
[n] C. Mitsuda, T. Honiden, N. Kumagai, S. Sasaki, T. Nakanishi, and A. Sasagawa, “Development of the Ceramic Chamber Integrated Pulsed Magnet Fitting for a Narrow Gap”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2879-2882. doi:10.18429/JACoW-IPAC2015-WEPMA049
[n] Z. H. Bai, L. Wang, D. R. Xu, and P. H. Yang, “Multi-bend Achromat Lattice with Interleaved Dispersion Bumps for a Diffraction-limited Storage Ring”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 52-54. doi:10.18429/JACoW-SAP2017-MOPH13
[n] R. Wang, R. Chen, Z. H. Chen, and M. Gu, “The Controller Design for Kicker Magnet Adjustment Mechanism in SSRF”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS022, pp. 1021-1023.
[n] E. F. Daly, D. Bostic, A. Lisin, M. Palrang, C. Perkins, and K. Skarpaas, “Stretchforming Vacuum Chambers for the PEP-II B-Factory High Energy Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP10, pp. 2057-2059.
[n] F. Ames et al., “The TRIUMF ARIEL RF Modulated Thermionic Electron Source”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 458-461. doi:10.18429/JACoW-LINAC2016-TUPRC020
[n] W. Wittmer, A. S. Fisher, D. J. Martin, and J. J. Sebek, “Detection of Instumental Drifts in the PEP II LER BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS084, pp. 4261-4263.
[n] S. R. Marques, F. H. Cardoso, C. Grizolli, L. Sanfelici, and M. M. Xavier, “Design and Commissioning of a Quadrant BPM for the LNLS Beamlines”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC064, pp. 1200-1202.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Schenk et al., “RF Quadrupole Structures for Transverse Landau Damping in Circular Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2516-2519.
- J. Wan et al., “Prototype Design of Wire Scanner for SHINE”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 285-287.
- C. Joshi et al., “Test of the Electron Hose Instability in the E157 Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH141, pp. 4002-4004.
- D. Walz et al., “Tests and Description of Beam Containment Devices and Instrumentation-A New Dimension in Safety Problems”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 465-472.
- M. Kilpatrick et al., “Interactive automated Bragg peak identification with 3D neutron scattering data”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM117, pp. 5138-5141.
- N. M. Cook et al., “Integrating Online Analysis with Experiments to Improve X-Ray Light Source Operations”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUSDSC02, pp. 921-924.
- L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
- A. Andersson, J. Breunlin, M. Brosi, and R. Svärd, “Recent progress at the UV to visible light-based diagnostic beam lines at MAX IV”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL135, unpublished.
- H. Ghasem, E. Ahmadi, and F. Saeidi, “Closed Orbit Correction in the High Field Lattice of ILSF Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA025, pp. 127-129.
- V. Michel et al., “BLISS - Experiments Control for ESRF Beamline”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 26-29.
- T. Mimashi et al., “The Design of Beam Abort System for the Super KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA023, pp. 1378-1380.
- F. Consoli, A. C. Caruso, G. Gallo, D. Rifuggiato, E. Zappal?á, and M. Di Giacomo, “RF Design of the Power Coupler for the Spiral2 Single Bunch Selector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP277, pp. 1346-1348.
- B. W??rkner et al., “Measuring Beamsize with the LHC Beam Gas Vertex Detector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2680-2683.
- G. Geloni, P. Ilinski, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Integration of the Optical Replica Ultrashort Electron Bunch Diagnostics with the High-Resolution Coherent Optical Transition Radiation Imager”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC46, pp. 603-606.
- A. Gerbershagen et al., “Establishment of the new particle therapy Research Center (PARTREC) at UMCG Groningen”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM080, unpublished.
- R. G. Eichhorn, N. A. Stilin, and W. Weingarten, “N-Doped Niobium Accelerating Cavities: Analyzing Model Applicability”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1014-1016.
- Yu. A. Rogovsky et al., “Beam Measurements with Visible Synchrotron Light at VEPP-2000 Collider”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD40, pp. 140-142.
- T. Katayama, T. Kikuchi, F. Nolden, G. Schreiber, M. Steck, and H. Stockhorst, “Simulation Study of Barrier Bucket Accumulation with Stochastic Cooling at the GSI ESR”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS19, pp. 136-139.
- A. Gerhard et al., “RF Sparking in Accelerator Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1108-1111.
- E. Gorniker et al., “RF System of VEPP-4M Electron-Positron Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP11, pp. 1681-1683.
- K. Bongardt, M. Pabst, and A. Letchford, “Halo Formation by Mismatch for High Intensity Bunched Beams”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4025, pp. 824-826.
- E. Kako et al., “Initial Tests of L-band Niobium Superconducting Cavities for Linear Collider Application”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F18, pp. XX-XX.
- J. Brodowski, “Design of a Versatile ESQ Transport System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3666-3669.
- A. Ueno, “Measurement of Precise Particle Distributions in Emittance Phase Plane in the JHP LEBT”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP10, pp. 343-345.
- J. Marriner, G. Jackson, D. McGinnis, R. Pasquinelli, D. Peterson, and J. Petter, “Bunched Beam Cooling in the FNAL Antiproton Accumulator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1577-1580.
- W. X. Cheng, B. Bacha, B. N. Kosciuk, and D. Padrazo Jr, “Improvements of NSLS-II X-ray Diagnostic Beamlines”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1837-1840.
- N. Li et al., “Performance of the PEP-II Low-Energy Ring Quadrupoles”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P040, pp. 3318-3320.
- T.-J. Kuo et al., “Design of prototype magnets for FETS-FFA”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB086, this conference.
- G. Heidenreich and Th. Stammbach, “Some Aspects of the 100 uA Operation of the SIN Injector Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EC-04, pp. 365-370.
- H. J. Son et al., “Status of the High-Current EBIS Charge Breeder for the Facility for Rare Isotope Beams”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper NACB02, pp. 172-176.
- S. A. Gavrilov et al., “Beam Diagnostics and Instrumentation Upgrade for Multipurpose Research Complex of INR RAS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 667-669.
- D. E. Young, V. Dudnikov, M. Popovic, C. W. Schmidt, and D. Sun, “Low Energy Improvements to the Fermilab 400-MeV Linear Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH102, pp. 3915-3917.
- M. A. Hevinga, S. Brandenburg, T. W. Nijboer, and J. Vorenholt, “Beamloss Monitoring and Control for High Intensity Beams at the AGOR-Facility”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP087, pp. 227-229.
- R. Carcagno et al., “First Fermilab Results of SRF Cavity Lorentz Force Detuning Compensation Using a Piezo Tuner”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP57, pp. XX-XX.
- S. Seletsky, V. Tupikov, S. Nagaitsev, and A. Shemyakin, “Field Measurements in the Cooling Section Solenoid for the Recycler Cooler”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO012, pp. 2373-2375.
- M. Washio et al., “Compact Picosecond Pulse Radiolysis System Using Photo-cathode RF Gun”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH188, pp. 2373-2375.
- R. G. Schonberg et al., “Portable X-Band Linear Accelerator Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3234-3237.
- R. Hettel et al., “Digital Orbit Feedback Control for SPEAR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ22, pp. 2717-2719.
- Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS66, pp. 3901-3903.
- S. Calatroni, V. Palmieri, M. Pasini, D. Ramos, T. Tardy, and T. Trilhe, “The HIE-ISOLDE Superconducting Cavities: Mechanical Design and Fabrication”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO010, pp. 546-549.
- I. A. Koop, A. P. Lysenko, I. N. Nesterenko, Yu. M. Shatunov, and A. A. Valishev, “Dynamic Aperture of the Storage Ring VEPP-2M in Round Beam Mode”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5V007, pp. 1433-1435.
- V. Bharadwaj et al., “Computer Controls Programming for Deceleration Beam in the Fermilab Antiproton Accumulator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 964-967.
- Q. Luo and D. R. Xu, “Progress on Preliminary Conceptual Study of HIEPA, a Super Tau-Charm Factory in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 422-424.
- P. A. McIntosh et al., “Realisation of a prototype superconducting CW cavity and cryomodule for energy recovery”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP33, pp. XX-XX.
- E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
- I. Wilson, “Alignment Studies for the CERN Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper WE2-01, pp. 557-561.
- K. Nakayoshi, Y. Fujii, T. Nakadaira, and K. Sakashita, “Development of an Expert System for the High Intensity Neutrino Beam Facility at J-PARC”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 154-158.
- V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
- M. M. Karliner, V. Kiselev, A. S. Medvedko, V. V. Smaluk, A. M. Zelenin, and N. I. Zinevich, “The Feedback System for Elemination the Fast Head-tail Instability at Storage Ring VEPP-4M”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP010G, pp. 1009-1011.
- B. Podobedov, B. Kushner, S. Ramamoorthy, Y. Tang, and E. Zitvogel, “Fast Digital Orbit Feedback Systems at NSLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPA005, pp. 396-398.
- B. Smit, F. Frei, R. Ischebeck, G. L. Orlandi, and V. Schlott, “Bunch Length Measurements Using Correlation Theory in Incoherent Optical Transition Radiation”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC40, pp. 471-473.
- J. A. Nolen and P. S. Miller, “Improved Energy Resolution with the MSU Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-08, pp. 249-253.
- A. Nordt et al., “Verification and Validation of the ESS Machine Protection System-of-Systems (MP-SoS)”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TU2BCO06, pp. 296-302.
- H. Huang et al., “AGS Polarized Proton Operation in Run 2009”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1GRC04, pp. 4251-4253.
- E. McCrory, G. Lee, and R. Webber, “Observation of Transverse Instabilities in the FNAL 200 MeV Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-54, pp. 182-184.
- K. Hasegawa, Y. Honda, H. Ino, M. Mizumoto, and N. Ouchi, “Beam Dynamics Design of a Proton Linac for the Neutron Science Project at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP05G, pp. 719-721.
- L. Catani et al., “Cathodic Arc Grown Niobium Films for RF Superconducting Cavity Applications”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP62, pp. 385-387.
- C. Lu et al., “Time-Resolved Measurement of Quadrupole Wakefields in Corrugated Structures”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 840-843.
- M. Tzoufras et al., “The Physical Picture of Beam Loading in the Blowout Regime”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS028, pp. 3061-3063.
- S. Wijethunga, R. Thurman-Keup, and V. Scarpine, “Geant4 simulations on Faraday cup design for PIP-II Laser wire scanner system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG38, pp. 2295-2298.
- S. W. Jang and E.-S. Kim, “Simultaneous Two Beam Acceleration Lattice Design Study for the Post Linear Accelerator of RISP”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3294-3296.
- Y. Tan et al., “Third order resonance correction using new Trim-S system in J-PARC MR”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB042, this conference.
- A. Sukhanov, W. Fu, J. P. Jamilkowski, and R. H. Olsen, “Fast Interactive Python-based Analysis of Streamed Images”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 825.
- P. J. S. Barratt et al., “High Stability Operation of the ISIS Pulsed Spallation Neutron Source at 200 micro-A”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP094G, pp. 584-586.
- S. Holmes et al., “Low-Level RF Signal Processing for the Next Linear Collider Test Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P026, pp. 3027-3029.
- F. Gougnaud et al., “Slow Control for Micromegas and Drift Chambers”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP013, pp. XX-XX.
- D. K. Johnson et al., “Positron Source from Betatron X-Rays Emitted in a Plasma Wiggler”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE019, pp. 1625-1627.
- K. Nakayoshi, Y. Fujii, and K. Sakashita, “Improvements in the T2K Primary Beamline Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA10, pp. 940-943.
- ?ü. Freitas, V. Hardion, M. Lindberg, R. Lindvall, R. Sv?ñrd, and C. Takahashi, “Control System Suite for Beam Position Monitors at MAX IV”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 496-499.
- Y. Suetsugu, H. Hisamatsu, K.-I. Kanazawa, K. Shibata, M. Shimamoto, and M. Shirai, “Ramp;D on Copper Beam Ducts with Antechambers and Related Vacuum Components”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH179, pp. 1438-1440.
- Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
- A. Faingersh et al., “New Resonator for the Israeli FEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH018, pp. 349-351.
- R. H. Miller, H. Deruyter, W. R. Fowkes, J. M. Potter, R. G. Schonberg, and J. N. Weaver, “RF Phase Focusing in Portable X-Band Linear Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3231-3234.
- P. Boonpornprasert, G. Z. Georgiev, M. Krasilnikov, X.-K. Li, and A. Lueangaramwong, “Simulation Study of a Bunch Compressor for an Accelerator-Based THz Source at the European XFEL”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2454-2456.
- C. Sch?Âmers et al., “Reacceleration of Ion Beams for Particle Therapy”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2091-2093.
- C. Mitsuda, T. Honiden, N. Kumagai, S. Sasaki, T. Nakanishi, and A. Sasagawa, “Development of the Ceramic Chamber Integrated Pulsed Magnet Fitting for a Narrow Gap”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2879-2882.
- Z. H. Bai, L. Wang, D. R. Xu, and P. H. Yang, “Multi-bend Achromat Lattice with Interleaved Dispersion Bumps for a Diffraction-limited Storage Ring”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 52-54.
- R. Wang, R. Chen, Z. H. Chen, and M. Gu, “The Controller Design for Kicker Magnet Adjustment Mechanism in SSRF”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS022, pp. 1021-1023.
- E. F. Daly, D. Bostic, A. Lisin, M. Palrang, C. Perkins, and K. Skarpaas, “Stretchforming Vacuum Chambers for the PEP-II B-Factory High Energy Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP10, pp. 2057-2059.
- F. Ames et al., “The TRIUMF ARIEL RF Modulated Thermionic Electron Source”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 458-461.
- W. Wittmer, A. S. Fisher, D. J. Martin, and J. J. Sebek, “Detection of Instumental Drifts in the PEP II LER BPM System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS084, pp. 4261-4263.
- S. R. Marques, F. H. Cardoso, C. Grizolli, L. Sanfelici, and M. M. Xavier, “Design and Commissioning of a Quadrant BPM for the LNLS Beamlines”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC064, pp. 1200-1202.
Back to search