Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2171-2174.
[n] J. M. Koch, J. M. Meyer, and E. Plouviez, “New Tune Measurement System for the ESRF Booster”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM020, pp. XX-XX.
[n] J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245. doi:10.18429/JACoW-SRF2021-MOPTEV017
[n] M. A. Boronina, V. A. Vshivkov, and G. Dudnikova, “3D Computer Simulations of the Ultrarelativistic Beam Dynamics in Super Colliders”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 326-329. doi:10.18429/JACoW-IPAC2015-MOPJE023
[n] M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
[n] P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
[n] M. Kireeff Covo, “Nondestructive Beam Current Monitor for the 88-inch Cyclotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3738-3740. doi:10.18429/JACoW-IPAC2014-THPME195
[n] J. H. Shao et al., “Dark Current Imaging Experiment in an L-band RF Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2952-2955. doi:10.18429/JACoW-IPAC2015-WEPMN015
[n] S. Hunt, “The Design of Very High Availability Accelerator Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP519, pp. XX-XX.
[n] V. V. Mytrochenko, M. I. Ayzatskiy, V. A. Kushnir, A. Opanasenko, S. A. Perezhogin, and V. L. Uvarov, “Intra-Bunch Energy Spread of Electrons in Powerful RF Linacs for Nuclear Physics Research”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS040, pp. 691-693.
[n] D. Yu and A. V. Smirnov, “Analytical and Time-Domain Computations of Single-Bunch Loss-Factor in a Planar Structure”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB075, pp. 3171-3173.
[n] J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 489-491. doi:10.18429/JACoW-IPAC2014-MOPME050
[n] N. I. Balalykin and A. B. Kuznetsov, “About the Amplitude Dependence of the Surface Resistance of Niobium Coated Copper Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B11, pp. 366-373.
[n] D. Proft, F. Frommberger, and W. Hillert, “Setup of a History Storage Engine Based on a Non-Relational Database at ELSA”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO003, pp. 34-36.
[n] W. Chou and Y. Jin, “Impedance Calculations for 2-D and 3-D Structures and the Impedance Budget of 7-GeV APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 909-912.
[n] L. E. Boon, A. F. Garfinkel, and K. C. Harkay, “Heat Load for the APS Superconducting Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC186, pp. 3332-3334.
[n] F.-Y. Lin, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and C. S. Yang, “Measurement of Injection System of AC Septum Magnets for TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD012, pp. 3521-3523.
[n] K. L. F. Bane, S. P. Antipov, M. G. Fedurin, K. Kusche, C. Swinson, and D. Xiang, “Measurement of Terahertz Generation in a Metallic, Corrugated Beam Pipe”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1889-1891. doi:10.18429/JACoW-IPAC2016-TUPOW053
[n] K. Kramarenko and M. I. Ayzatsky, “Random-Regular Accelerating Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG037, pp. 2969-2971.
[n] T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
[n] M. G. Fedurin, Y. C. Jing, D. Stratakis, and C. Swinson, “BNL ATF II Beamlines Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1445-1447. doi:10.18429/JACoW-IPAC2015-TUPWA020
[n] W. Chou, M. A. Kostin, J. R. Lackey, R. J. Macek, Z. Tang, and P. S. Yoon, “Some Physics Issues of Carbon Stripping Foils”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS013, pp. 1679-1681.
[n] L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
[n] B. K. Stillwell, B. Brajuskovic, H. Cease, D. L. Fallin, J. R. Noonan, and M. M. O, “Conceptual Design of a Storage Ring Vacuum System Compatible with Implementation of a Seven Bend Achromat Lattice at the APS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2409-2411. doi:10.18429/JACoW-IPAC2014-WEPME059
[n] L. Ristori, M. H. Awida, I. V. Gonin, M. Merio, D. Passarelli, and V. P. Yakovlev, “Design of SSR1 Single Spoke Resonators for PXIE”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC057, pp. 2342-2344.
[n] C. H. Chang, C.-H. Chang, J. C. Huang, C.-S. Hwang, and C. K. Yang, “Progress in Insertion Devices for TPS in Phase I”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC176, pp. 3314-3316.
[n] Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
[n] Y. Ivanyushenkov et al., “Status of the Development of Superconducting Undulators for Storage Rings and Free Electron Lasers at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1068-1070. doi:10.18429/JACoW-NAPAC2016-THA1CO06
[n] A. A. Gorzawski et al., “The AccTesting Framework: An Extensible Framework for Accelerator Commissioning and Systematic Testing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC078, pp. 1250-1253.
[n] H. Eickhoff, B. Franczak, U. Krause, C. Riedel, and R. Steiner, “Accelerator Aspects of the Cancer Therapy Project at the GSI Darmstadt”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP052G, pp. 2641-2643.
[n] K. Takahashi et al., “Design and Construction of Nb3Sn Vapor Diffusion Coating System at KEK”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 23. doi:10.18429/JACoW-SRF2021-SUPCAV008
[n] V. Yu. Zaslavsky et al., “Terahertz Band FEL with Advanced Bragg Reflectors”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC78, pp. 424-427.
[n] Y. Gao et al., “Initial results of applying an autoencoder to detect anomalies in the air conditioning systems of the Brookhaven accelerator complex”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4448-4451. doi:10.18429/JACoW-IPAC2023-THPL013
[n] C. M. Baffes and A. V. Shemyakin, “Testing Results of the Prototype Beam Absorber for the PXIE MEBT”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3967-3969. doi:10.18429/JACoW-IPAC2014-THPRI084
[n] L. R. Carmichael, M. D. Church, R. Neswold, and A. Warner, “Development of a Machine Protection System for the Superconducting Beam Test Facility at FERMILAB”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU013, pp. 1084-1086.
[n] O. Capatina, K. Artoos, N. Bourcey, O. Calvet, and C. Hauviller, “Mechanical Dynamic Analysis of the LHC Arc Cryo-Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG007, pp. 1434-1436.
[n] R. Neswold and C. King, “Generation of Simple, Type-Safe Messages for Inter-Task Communications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP024, pp. 137-139.
[n] V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
[n] C. G. R. Geddes et al., “Stable Electron Beams with Low Absolute Energy Spread from a Laser Wakefield Accelerator with Plasma Density Ramp Controlled Injection”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBKI01, pp. 1916-1918.
[n] R. L. Geng, Y. Fuwa, H. Hayano, H. Ito, Y. Iwashita, and Z. Li, “Performance of First Prototype Multi-Cell Low-Surface-Field Shape Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 222-226. doi:10.18429/JACoW-SRF2019-MOP064
[n] A. V. Smirnov, Y. Luo, and D. Yu, “Flat-Field Planar Structures Designed for Small and Large Aspect Ratios”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH076, pp. 3855-3857.
[n] C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
[n] L. N. Drosdal et al., “SPS Transverse Beam Scraping and LHC Injection Losses”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR094, pp. 2050-2052.
[n] M. Vitz, “Spin-Tracking Simulations in a COSY Model Using Bmad”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2158-2160. doi:10.18429/JACoW-IPAC2022-WEPOTK040
[n] B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792.
[n] J.-L. Revol et al., “Operation and Upgrade of the ESRF Synchrotron Light Source.”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA013, pp. 2502-2504.
[n] J. R. Cary and S. Shasharina, “Efficient C++ Library for Differential Algebra”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP38C, pp. 1236-1238.
[n] D. Passarelli, M. H. Awida, I. V. Gonin, L. Ristori, and V. P. Yakovlev, “Pressure Sensitivity Characterization of Superconducting Spoke Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC056, pp. 2339-2341.
[n] T.-C. Liu et al., “Radiation Pressure Acceleration of Multi-ion Thin Foil”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS013, pp. 3448-3450.
[n] J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
[n] J. M. White, T. J. Fessenden, R. A. Fontaine, A. R. Harvey, and A. C. Paul, “Beam Dump/Diagnostics Assembly for a 10-kA, 50 MeV, 50-ns Electron Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2207-2210.
[n] J.-P. Carneiro, S. U. Hansen, A. Ibrahim, V. D. Shiltsev, J. Steimel, and R. C. Webber, “First Results of a Digital Beam Phase Monitor at the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT015, pp. 1428-1430.
[n] G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
[n] C. Bourat, A. Massarotti, G. Meyrand, D. T. Tran, D. Tronc, and A. Wrulich, “The 100 MeV Preinjector for the Trieste Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 935-938.
[n] Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507.
[n] W. Chou et al., “8 GeV H- Ions: Transport and Injection”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE011, pp. 1222-1224.
[n] L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975.
[n] G. Guethlein, S. Sampayan, T. Houck, and J. McCarrick, “Faraday Cup Measurements of Ions Backstreaming into an Electron Beam Impinging on a Plasma Plume”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB14, pp. 467-469.
[n] M. Xiao, “Transport from the Recycler Ring to the Antiproton Source Beamlines”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR086, pp. 2026-2028.
[n] J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME037, pp. 3594-3596.
[n] R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3710-3714.
[n] M. Q. He et al., “Laser Thin Gas Target Acceleration for Quasi-monoenergetic Proton Generation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS014, pp. 3451-3453.
[n] D. T. Blackfield, Y.-J. Chen, J. R. Harris, S. D. Nelson, A. Paul, and B. R. Poole, “Injector Particle Simulation and Beam Transport in a Compact Linear Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS057, pp. 1781-1783.
[n] L. Kang, Z. X. He, H. Qu, J. B. Yu, and Y. Q. Zou, “Application of Electropolishing in CSNS/RCS Primary Collimator Scrapers”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI024, pp. 3348-3350.
[n] A. Ogata and T. Katsouleas, “Proton Acceleration in Plasma Waves Produced by Backward Raman Scattering”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA142, pp. 3713-3715.
[n] M. E. Conde et al., “Commissioning and Recent Experimental Results at the Argonne Wakefield Accelerator Facility (AWA)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2472-2474. doi:10.18429/JACoW-IPAC2015-WEAD1
[n] T. Hosokai et al., “Supersonic Gas Jet Target for Generation of Relativistic Electrons with 12TW-50fs Laser Pulse”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI073, pp. 981-983.
[n] W. E. Norum et al., “First Full-Sector Closed-Loop Operational Experience for the FPGA-Based Broadband Beam Position Monitor at the APS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP004, pp. 3441-3443.
[n] T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 987-989. doi:10.18429/JACoW-IPAC2014-TUOCB03
[n] D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3995-3997. doi:10.18429/JACoW-IPAC2014-THPRI095
[n] I. Vasserman, M. Abliz, E. Gluskin, E. Trakhtenberg, and J. Z. Xu, “Magnetic Tuning of the APS Wiggler as a Study for Tuning the NSLS-II Damping Wiggler”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP079, pp. 747-749.
[n] A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
[n] P. Fernandes, R. Massarino, A. Massarotti, R. Parodi, and A. Tarditi, “The Design of the R.F. Cavities for Elettra”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 220-223.
For LaTeX
Use Complete Form
For BibTeX
References
- J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2171-2174.
- J. M. Koch, J. M. Meyer, and E. Plouviez, “New Tune Measurement System for the ESRF Booster”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM020, pp. XX-XX.
- J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245.
- M. A. Boronina, V. A. Vshivkov, and G. Dudnikova, “3D Computer Simulations of the Ultrarelativistic Beam Dynamics in Super Colliders”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 326-329.
- M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
- P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
- M. Kireeff Covo, “Nondestructive Beam Current Monitor for the 88-inch Cyclotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3738-3740.
- J. H. Shao et al., “Dark Current Imaging Experiment in an L-band RF Gun”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2952-2955.
- S. Hunt, “The Design of Very High Availability Accelerator Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP519, pp. XX-XX.
- V. V. Mytrochenko, M. I. Ayzatskiy, V. A. Kushnir, A. Opanasenko, S. A. Perezhogin, and V. L. Uvarov, “Intra-Bunch Energy Spread of Electrons in Powerful RF Linacs for Nuclear Physics Research”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS040, pp. 691-693.
- D. Yu and A. V. Smirnov, “Analytical and Time-Domain Computations of Single-Bunch Loss-Factor in a Planar Structure”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB075, pp. 3171-3173.
- J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 489-491.
- N. I. Balalykin and A. B. Kuznetsov, “About the Amplitude Dependence of the Surface Resistance of Niobium Coated Copper Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B11, pp. 366-373.
- D. Proft, F. Frommberger, and W. Hillert, “Setup of a History Storage Engine Based on a Non-Relational Database at ELSA”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO003, pp. 34-36.
- W. Chou and Y. Jin, “Impedance Calculations for 2-D and 3-D Structures and the Impedance Budget of 7-GeV APS Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 909-912.
- L. E. Boon, A. F. Garfinkel, and K. C. Harkay, “Heat Load for the APS Superconducting Undulator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC186, pp. 3332-3334.
- F.-Y. Lin, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and C. S. Yang, “Measurement of Injection System of AC Septum Magnets for TPS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD012, pp. 3521-3523.
- K. L. F. Bane, S. P. Antipov, M. G. Fedurin, K. Kusche, C. Swinson, and D. Xiang, “Measurement of Terahertz Generation in a Metallic, Corrugated Beam Pipe”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1889-1891.
- K. Kramarenko and M. I. Ayzatsky, “Random-Regular Accelerating Structures”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG037, pp. 2969-2971.
- T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
- M. G. Fedurin, Y. C. Jing, D. Stratakis, and C. Swinson, “BNL ATF II Beamlines Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1445-1447.
- W. Chou, M. A. Kostin, J. R. Lackey, R. J. Macek, Z. Tang, and P. S. Yoon, “Some Physics Issues of Carbon Stripping Foils”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS013, pp. 1679-1681.
- L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
- B. K. Stillwell, B. Brajuskovic, H. Cease, D. L. Fallin, J. R. Noonan, and M. M. O, “Conceptual Design of a Storage Ring Vacuum System Compatible with Implementation of a Seven Bend Achromat Lattice at the APS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2409-2411.
- L. Ristori, M. H. Awida, I. V. Gonin, M. Merio, D. Passarelli, and V. P. Yakovlev, “Design of SSR1 Single Spoke Resonators for PXIE”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC057, pp. 2342-2344.
- C. H. Chang, C.-H. Chang, J. C. Huang, C.-S. Hwang, and C. K. Yang, “Progress in Insertion Devices for TPS in Phase I”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC176, pp. 3314-3316.
- Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
- Y. Ivanyushenkov et al., “Status of the Development of Superconducting Undulators for Storage Rings and Free Electron Lasers at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1068-1070.
- A. A. Gorzawski et al., “The AccTesting Framework: An Extensible Framework for Accelerator Commissioning and Systematic Testing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC078, pp. 1250-1253.
- H. Eickhoff, B. Franczak, U. Krause, C. Riedel, and R. Steiner, “Accelerator Aspects of the Cancer Therapy Project at the GSI Darmstadt”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP052G, pp. 2641-2643.
- K. Takahashi et al., “Design and Construction of Nb3Sn Vapor Diffusion Coating System at KEK”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 23.
- V. Yu. Zaslavsky et al., “Terahertz Band FEL with Advanced Bragg Reflectors”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC78, pp. 424-427.
- Y. Gao et al., “Initial results of applying an autoencoder to detect anomalies in the air conditioning systems of the Brookhaven accelerator complex”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL013, pp. 4448-4451.
- C. M. Baffes and A. V. Shemyakin, “Testing Results of the Prototype Beam Absorber for the PXIE MEBT”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3967-3969.
- L. R. Carmichael, M. D. Church, R. Neswold, and A. Warner, “Development of a Machine Protection System for the Superconducting Beam Test Facility at FERMILAB”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU013, pp. 1084-1086.
- O. Capatina, K. Artoos, N. Bourcey, O. Calvet, and C. Hauviller, “Mechanical Dynamic Analysis of the LHC Arc Cryo-Magnets”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG007, pp. 1434-1436.
- R. Neswold and C. King, “Generation of Simple, Type-Safe Messages for Inter-Task Communications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP024, pp. 137-139.
- V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
- C. G. R. Geddes et al., “Stable Electron Beams with Low Absolute Energy Spread from a Laser Wakefield Accelerator with Plasma Density Ramp Controlled Injection”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOBKI01, pp. 1916-1918.
- R. L. Geng, Y. Fuwa, H. Hayano, H. Ito, Y. Iwashita, and Z. Li, “Performance of First Prototype Multi-Cell Low-Surface-Field Shape Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 222-226.
- A. V. Smirnov, Y. Luo, and D. Yu, “Flat-Field Planar Structures Designed for Small and Large Aspect Ratios”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH076, pp. 3855-3857.
- C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
- L. N. Drosdal et al., “SPS Transverse Beam Scraping and LHC Injection Losses”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR094, pp. 2050-2052.
- M. Vitz, “Spin-Tracking Simulations in a COSY Model Using Bmad”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2158-2160.
- B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792.
- J.-L. Revol et al., “Operation and Upgrade of the ESRF Synchrotron Light Source.”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA013, pp. 2502-2504.
- J. R. Cary and S. Shasharina, “Efficient C++ Library for Differential Algebra”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP38C, pp. 1236-1238.
- D. Passarelli, M. H. Awida, I. V. Gonin, L. Ristori, and V. P. Yakovlev, “Pressure Sensitivity Characterization of Superconducting Spoke Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC056, pp. 2339-2341.
- T.-C. Liu et al., “Radiation Pressure Acceleration of Multi-ion Thin Foil”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS013, pp. 3448-3450.
- J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
- J. M. White, T. J. Fessenden, R. A. Fontaine, A. R. Harvey, and A. C. Paul, “Beam Dump/Diagnostics Assembly for a 10-kA, 50 MeV, 50-ns Electron Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2207-2210.
- J.-P. Carneiro, S. U. Hansen, A. Ibrahim, V. D. Shiltsev, J. Steimel, and R. C. Webber, “First Results of a Digital Beam Phase Monitor at the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT015, pp. 1428-1430.
- G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
- C. Bourat, A. Massarotti, G. Meyrand, D. T. Tran, D. Tronc, and A. Wrulich, “The 100 MeV Preinjector for the Trieste Synchrotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 935-938.
- Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507.
- W. Chou et al., “8 GeV H- Ions: Transport and Injection”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE011, pp. 1222-1224.
- L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975.
- G. Guethlein, S. Sampayan, T. Houck, and J. McCarrick, “Faraday Cup Measurements of Ions Backstreaming into an Electron Beam Impinging on a Plasma Plume”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB14, pp. 467-469.
- M. Xiao, “Transport from the Recycler Ring to the Antiproton Source Beamlines”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR086, pp. 2026-2028.
- J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME037, pp. 3594-3596.
- R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3710-3714.
- M. Q. He et al., “Laser Thin Gas Target Acceleration for Quasi-monoenergetic Proton Generation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS014, pp. 3451-3453.
- D. T. Blackfield, Y.-J. Chen, J. R. Harris, S. D. Nelson, A. Paul, and B. R. Poole, “Injector Particle Simulation and Beam Transport in a Compact Linear Proton Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS057, pp. 1781-1783.
- L. Kang, Z. X. He, H. Qu, J. B. Yu, and Y. Q. Zou, “Application of Electropolishing in CSNS/RCS Primary Collimator Scrapers”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI024, pp. 3348-3350.
- A. Ogata and T. Katsouleas, “Proton Acceleration in Plasma Waves Produced by Backward Raman Scattering”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA142, pp. 3713-3715.
- M. E. Conde et al., “Commissioning and Recent Experimental Results at the Argonne Wakefield Accelerator Facility (AWA)”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2472-2474.
- T. Hosokai et al., “Supersonic Gas Jet Target for Generation of Relativistic Electrons with 12TW-50fs Laser Pulse”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI073, pp. 981-983.
- W. E. Norum et al., “First Full-Sector Closed-Loop Operational Experience for the FPGA-Based Broadband Beam Position Monitor at the APS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP004, pp. 3441-3443.
- T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 987-989.
- D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3995-3997.
- I. Vasserman, M. Abliz, E. Gluskin, E. Trakhtenberg, and J. Z. Xu, “Magnetic Tuning of the APS Wiggler as a Study for Tuning the NSLS-II Damping Wiggler”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP079, pp. 747-749.
- A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
- P. Fernandes, R. Massarino, A. Massarotti, R. Parodi, and A. Tarditi, “The Design of the R.F. Cavities for Elettra”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 220-223.
Back to search